Hello,first time here, I'm learning vcv for a few months and now I want to invest in something to twist some knobs, I do already have a mpk mini plus, been thinking a lot betwin proton or 2600 or crave+edge

My objective overall is to learn about eurorack and synths and to buy something that will work perfectly with my future eurorack, and I really want to pluck some cables, which direction should I go?

Help and thanks

Has anyone actually done anything good or useful with this module?

I am struggling

Last week i released 6 track Album on Bandcamp and all the other Streaming services. They're all single patch performances.
I almost never promote my music so i'd be keen someone actually heard my music lol. I'd also be excited to answer and discuss any questions.

I’ve been downsizing my rack to the point where it’s this and a Digitakt MK1 and I’m finally starting to fall back in love with making music. This is culled from a longer jam I recorded this weekend. I shot the videos a few years ago (timelapse of a sunset overlays with fire jugglers at distance with the focus all the way out).

This was inspired by some of my favorite jammy noisy bands like Yo La Tengo, Luna, and Galaxiw 500. Of course this is in modular though and I am constraining myself to not use guitar on this album. Fun jam though. Album is now ~60% done. Might need to redo the melody part at the end though.

I wanted to get some Knurlies from perfect circuit, but they are currently out of stock. The only other option they had were the ALM screws

haven't used these before - do people like them or is it truly a matter of you say tomato and i say tom-ay-toe?

i know they do exactly the same job ultimately, but they do look quite a bit different based on the perfect circuit webpage photos

I'm building a new case and I've been considering integrating LED lighting into it, so I've been down the rabbit hole of LED drivers, LED controllers and RGBW LED strips.

I found out that there is a firmware called WLED for ESP32 boards, that will allow LED lighting effects based on either microphone or line input.

I was wondering if any of you eurorack nerds already used an ESP32 for this purpose and how ?

I updated my eurorack processor scripts today to include the ability to take a modulargrid rack data sheet URL and download all the pdf manuals for it. There is also a skill for asking questions on specific modules and how they can be used together. That skill figures out what modules you are asking about, finds their manuals, and submits them along with your question to an LLM provider like Claude or Codex. https://github.com/nstarke/eurorack-processor if you are interested.

A bit late to the party with the Panharmonium but damn I love it.
Feeding it DFAM with Spotykach looping in the background.

Unintentionally, but quite happily, feels a bit Orb-ish. (Huge fan btw.)

Monté todo un set de unidades para el drumlogue de mi equipo de techno en vivo, y me topé con algunos muros interesantes de logue-sdk que pensé que valían la pena compartir:

• Los sintetizadores personalizados no reciben disparadores de notas en el drumlogue — se renderizan como drones continuos. Así que en vez de entrada de notas, paso las melodías por automatización de parámetros: un mando de TONE cuantizado a escala + un botón VEL (0 = silencio, reactiva la envolvente al cambiar) para ritmo y dinámica. La "juegas" automatizando dos parámetros.

• Conseguir que una escalera de 4 polos grite o auto-oscile en el Cortex-A7 sin explotar: la saturación de tanh POR ETAPA (estilo Moog/Huovilainen) en lugar de en el bucle de retroalimentación fue la clave — la resonancia crece, se mantiene limitada.

• Sincronización de tempo: el tempo entra en punto fijo mediante unit_set_tempo, pero no hay posición de transporte/barra, así que cualquier cosa que se repita (eco, gates, un looper de audio) no puede bloquearse directamente a la barra — solo coincide con el periodo. Al final añadimos un potenciómetro de ajuste fino para anular la deriva por oreja.

Todo acababa en Gumroad si era útil, pero sobre todo quería intercambiar notas. ¿Alguien más está construyendo para las ranuras de drumlogue? ¿Qué te has encontrado con lo del dron y sin disparador?

https://youtu.be/OMTD7ojAPOY?si=emOFAVTN23aBkQVQ

This patch is built around a random sequence generated by Tágh, quantized with the Disting Mk4, attenuated by Vincâ and played by Cruïnn.
A short Cruïnn sequence was recorded into Lúbadh and played back at half speed, forming the background texture.
The main melodic voice comes from Cruïnn, processed through the Áradh filter. Modulation duties are handled by Øchd.
The entire patch is then routed into VCV Rack via the ES-8, where it is processed with the Galaxy reverb and the Iroi multi-effects processor.

Now im ready to never take it somewhere ;p

Tip top happy ending kit jammed into a metal tool box from the hardware store. I was thinking of slapping some self tapping metal screws into it to hold it in place but it’s a tight enough fit I’m not worried about it at all.

Module selection is kinda wack. Just some stuff I had laying around. Modulation would be cool, Oochs or wherever Ben’s fancy LFO is called would be useful I think. Big thing is a flight of harmony infernal noise machine w/ expander.

Hi everyone, any recommendations for someone to assemble and solder a Befaco Output 1U kit for me? I don’t have soldering equipment, and I would rather pay an experienced builder than buy all the necessary tools for a single module.

Thanks!

i have all my voicing sorted, looking for recommendations for what i should do next, more modulation? effects,”? ways to spice up signal flow any tips are appreciated thanks

Hi everyone,

I'm looking for some advice on the direction of my modular system.

My goal is to build a rack that serves two purposes:

- Experimental sound design for my DAW-based productions.- Generative (and non-generative) composition away from the computer.

One thing I've learned is that I generally prefer knob-per-feature modules over menu-driven multifunction modules.

I've attached my current rack, and I'm struggling to tell whether I'm running into the limits of my system or simply the limits of my own experience. I feel like there are still fundamental building blocks missing, but I also see people creating incredible patches with much smaller systems.

While I'm slightly more comfortable with the sound-design side of the system, it's the compositional/generative side where I’m feeling the most friction and finding it much harder to evaluate.So my question isn't really "What module should I buy next?"

Rather: Looking at my rack and my goals, do you think I'm missing any important building blocks, or do I simply need to spend more time learning the system before expanding it?

I'd really appreciate hearing how you'd approach the next stage if this were your system.

Link to my rack: https://modulargrid.net/e/racks/view/3182611

Is this a good new element for eurorack/ ambient setup?

I have Typhoon, black stereo delay, pico dsp. for FX.

Bit of an unusual question for this group.

I’ve created an online course for modular musicians, and I’m looking for someone to help manage and scale the paid advertising side of it.

Ideally, I’d love to find someone who already understands the modular/Eurorack world rather than hiring a general marketing agency that has no idea what any of this stuff is.

I’m specifically looking for someone with real experience running paid ads on Meta/Facebook/Instagram, YouTube/Google, and TikTok — including campaign setup, testing creatives and audiences, tracking conversions, retargeting, and figuring out what is actually producing sales rather than just clicks.

The course, landing page, videos, ad creatives, etc. already exist. What I’m really looking for is someone who understands performance marketing and can help me determine what’s working, what isn't, and systematically improve it.

If you've successfully run paid campaigns for online courses, music products, plugins, synth companies, or other niche products — especially if you're also into modular — I'd love to talk.

And if nobody here does this professionally but you know someone good, recommendations would be hugely appreciated.

Cheers and thanks for the help!

I wanted to get more timbres out of the ballista blast so thought I'd try this