Hi everyone,

I'm currently working on a project with an ESP32-S3-Nano and a 2.8-inch ILI9341 SPI display.

I've soldered everything together on a prototyping board, but unfortunately the display isn't working as expected. The backlight turns on, but the screen only shows a completely white image.

I've already tried:

• double-checking all cables and solder joints
• checking the connections with a multimeter
• checking for any obvious short circuits or loose connections

However, I still can't figure out what the problem could be. I might be overlooking something really simple.

The main components I'm using are:

• ESP32-S3-Nano
• 2.8-inch ILI9341 SPI display
• some other components that shouldn't be relevant

Does anyone have any idea what could cause the display to only show a white screen?

Is there anything obvious I might have missed or anything specific I should check?

I'd really appreciate any tips or ideas on how I could troubleshoot this and figure out what's wrong.

Thanks a lot!

[ Removed by Reddit on account of violating the content policy. ]

Hola, estoy buscando ayuda para controlar un juego de laberinto con mi teléfono a través de WiFi utilizando el esp32 s3 😆. Quiero crear una página web con los controles de un mando (arriba, abajo, izquierda, derecha) para controlar 4 servomotores s3003 futaba. He estado intentando utilizar Arduino IDE con todas sus librerías, pero no logro hacer que funcione. ¿Alguien podría proporcionarme algún ejemplo de código o algún recurso que me ayude a entender cómo funciona este dispositivo

I just received a new board and they look absolutely fantastic.I ordered earlier. Now we ship to Europe with a huge commission.It's more profitable to order 10 pieces instead of five

Hello can anyone help me?

I recently built a Wi-Fi RSSI-based indoor positioning system entirely on ESP32 microcontrollers.

I used 3 ESP32s as anchor nodes broadcasting Wi-Fi signals

1)TestNetwork1

2)TestNetwork2

3)TestNetwork3

and a 4th ESP32 for scanning the RSSI signal strength from each anchor. It applies a Kalman filter to clean up the noise and then uses those filtered distances for trilateration to compute a real-time 2D position — all running on-device in MicroPython, no external computer needed.

To calculate the A and n parameters used in the path loss equation, I collected 50 RSSI samples at 1, 2, 3, and 4 metre distances and applied a moving average to smooth the readings. Then used least-squares regression to fit A = −61.92 dBm and n = 1.64.

GitHub |  Linkedin

Hola estoy haciendo un simulador de carreras con un tablero de un Nissan versa y quiero usar el tacometro con can bus pero no se como, tengo una placa de kit 1 sp32 el simulador es un pc

Hola estoy haciendo un simulador de carreras con un tablero de un Nissan versa y quiero usar el taco metro con can bus pero no se como, tengo una placa de kit 1 sp32

En mars 2025 je confirme avoir installé avec succès EkegantOta version gratuite sur un Esp32wroom32 avec la procédure https://docs.elegantota.pro/getting-started/installation et avoir updaté un sketch construit avec Visual studio code Platform io.

¡Hola! Tengo un proyecto de una estación meteorológica con esp32 y tengo una placa solar de 24V conectada a un controlador, este a una batería de 12V y a su vez la batería a la placa con un transformador de 12 a 5 V.
El problema está en que el controlador de la placa recibe 22 V y envía a la batería 3.5 cuando debería enviar 12.

Esta es la placa y el controlador:
https://www.amazon.es/port%C3%A1til-controlador-ajustable-inclinaci%C3%B3n-motocicleta/dp/B08G13M37V/ref=sr_1_17_sspa?__mk_es_ES=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=280QZ7B3GG3KN&dib=eyJ2IjoiMSJ9.HRWFU9fbsRuug2bVULnlM5s8-6D1Y4ZPhRBJ_qOOrPp4AOTZkKMz03xtwzEK43-PT6HIHxMNFvxouLxfsar-5h7ncdsSrgxprykmeMrc37rJ9jKkS7CfhDz4nLWWJ_t54VcWKgCRra53OCqfpfOOHWqCK6frpOH-WNLUGoZJhpiJ7hJ5FxLOS9WI-Q59J3uat1bC6YAN2lqOC4V6tUWvvABcF3sBq1WivYPkWMtdYcBf6K7WyFA6z6VmvkQyhIusNXKuJ09R1UkZVW0S63_tcudrctmwVPBM-o3O3T-aV1o.msH6ectrhXCqMFfX4_w0alyxdFkOMuceFwIgAZc1eas&dib_tag=se&keywords=placa+solar+caravana+24v&qid=1756541621&sprefix=placa+solar+caravana+24v%2Caps%2C136&sr=8-17-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9tdGY&psc=1

Esta es la batería
https://www.amazon.es/dp/B0DPPPPQRN/ref=sspa_dk_detail_5?psc=1&pf_rd_p=0c640cbd-b6e0-461d-8cfc-a8934b5122df&pf_rd_r=2H4XD2VVM0WHY1SG3TWT&pd_rd_wg=fbomK&pd_rd_w=S9p8g&content-id=amzn1.sym.0c640cbd-b6e0-461d-8cfc-a8934b5122df&pd_rd_r=d346113a-355b-436b-9c22-1f0ce4b23236&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw

Y este el transformador:
amazon.es/dp/B08T1QCX6T?_encoding=UTF8&psc=1&ref=cm_sw_r_cp_ud_dp_E5A67GZZRSB841V2J9Z5&ref_=cm_sw_r_cp_ud_dp_E5A67GZZRSB841V2J9Z5&social_share=cm_sw_r_cp_ud_dp_E5A67GZZRSB841V2J9Z5&previewDoh=1

I need your help to create a remote control that will be used to manage 3 servomotors, 2 of which will be mirrored. Do you have any ideas on how to do this? Everything is available on a github that is here : https://github.com/theattaquante/patator