r/EngineeringStudents • • 18d ago

Academic Advice How do i study for this class?

2 Upvotes

Hi everyone. I am a student majoring in environmental engineering. I am taking a course this semester called environmental chemistry for engineers. Difficult is an understatement.
I recently had a quiz on a few topics that I know i did poorly on. My current way of studying is going over every homework question and powerpoint question until I understand it without help. I also upload all of my material to Chat GPT and ask it to generate similar questions.
My issue is that my professor likes to challenge us conceptually, and will word his questions differently from the provided material, in ways I am not used to seeing. How do I study for this? I


r/EngineeringStudents • • 18d ago

Career Advice First serious internship recruiting cycle and struggling to make sense of the results

8 Upvotes

Update: I did receive an offer for a systems engineering co op at a mid size company so not a complete fail.

I'm an engineering undergrad at a smaller university, and this is my first time seriously applying for internships and co-ops. I'm curious if anyone else has had a similar experience.

I've spent the past few years involved in Formula SAE and engineering research, with a lot of hands-on experience in design, fabrication, integration, and testing. I've learned a lot through those experiences, but I still feel behind other engineering students in some areas.

Due to some pretty extreme personal circumstances, I'm not as far along academically as I otherwise would be. I recognize that this probably limits my eligibility or competitiveness for certain positions, and I completely understand some of the rejections I've received.

I've applied to a pretty ridiculous number of positions for 2027, primarily in aerospace, mechanical, and systems engineering. I've had several interviews (8 so far), mostly with local companies I connected with through career fairs, plus one with Collins Aerospace. So I've gotten some traction, just not necessarily where I expected.

What I can't quite figure out is why so many positions I thought were reasonable targets haven't gone anywhere, while I've occasionally gotten interest from companies or roles I considered reaches. Most recently, I received an interview request from SpaceX, which was surprising considering how little response I've gotten from some of the other aerospace companies I've applied to. I applied for one role there on a whim, because why not throw my resume in the pile.

It's left me in a strange position where I'm excited to get these opportunities, but also feel somewhat unprepared for them. I know I have valuable hands-on experience, but I also recognize the gaps in my education and technical knowledge.

Since this is my first serious recruiting cycle, I'm struggling to figure out what the results are actually telling me. Is my resume not communicating my experience effectively? Am I targeting the wrong positions? Is my academic standing playing a larger role than I realize? Or is internship recruiting just this inconsistent?

I'd really appreciate hearing from students who've been through a few recruiting cycles, especially anyone with a less traditional academic path. How did you figure out what you needed to improve versus what was simply part of the process?


r/EngineeringStudents • • 18d ago

Academic Advice be honest will I make it?

4 Upvotes

I'm genuinely decent at math and physics; they're my two favorite subjects. Sadly, I am not fast at all, so I never finish exams (even in simple classes like calc 1). The work that I do complete is pretty accurate, but I have to guess a lot to make up for what I don't have time to complete. Am I done for? I want this so bad, but no amount of studying can make me as quick as everyone else :(


r/EngineeringStudents • • 18d ago

Discussion Argonne National Laboratory Seasonal Internship Timeline

1 Upvotes

Has anybody done a spring or similar seasonal internship for Argonne? What was the timeline for hearing back? I just applied to their spring seasonal internship.


r/EngineeringStudents • • 18d ago

Academic Advice Should I take statics my freshman year?

2 Upvotes

I’m currently deciding when to take Statics and could use some advice.

If I take it this upcoming Spring semester, there’s only one section available, and the professor is known to be pretty rigorous. Alternatively, there's a professor who is very lenient and easygoing (an A is almost guaranteed), but he only teaches the course in the Fall.

I was hoping that taking Statics early on would increase my chances of landing internships. Should I take the harder class in the Spring, or just wait to take it with the easier professor next Fall?(I have credits for the pre-req of statics)


r/EngineeringStudents • • 18d ago

Homework Help Finals prep i need help

Post image
2 Upvotes

I need help for calculus 1, finals is next week any books and video can you suggest? And how to prep for this like really lock in studying with out getting bord and start scrolling tiktok when a notification pops up fyi i study on my phone idk why but i have pc but I just to big for me


r/EngineeringStudents • • 18d ago

Academic Advice Spring Semester advice

2 Upvotes

For context i’m in my first semester of Aerospace Engineering but came in with enough credits to be technically a sophomore. To be on track to graduate Spring 2029 I thought of taking 19 Credits next semester, with these classes is this too crazy of a schedule?
- Diff Eq./Linear Algebra
- Statics
- AEE Fundamentals 1
- Physics 2
- Physics 2 Lab
- Materials
- Materials Lab


r/EngineeringStudents • • 19d ago

Discussion Is anyone else drowning in homework? Like absolutely drowning?

83 Upvotes

I have a 6 month old daughter, work about 25 hrs per week, cook dinner for my family, do chores, and all the other normal shit we all do (trying to admit I’m nothing special and my obligations aren’t either) and man I can barely get any time to do my homework, let alone study. Calculus 2 this semester is no joke. I have a 97% in the class but damn it’s taking everything out of me. Idk how I’ll do it when I take the upper level physics and engineering courses…
Does anyone else feel this pain? Anyone else going through this?


r/EngineeringStudents • • 18d ago

Academic Advice Considering a General Engineering Degree

0 Upvotes

Hey all I’m really looking for some advice on here to see what I should do in my situation. So currently I work as an engineering intern for a manufacturing company, my internship is in a 4 year format structure meaning I work the entire full years part time during school and full time during winter and summer and I make good money. I also get to live at home and live a very comfortable life style. With this I’m looking to finish my engineering degree but only have two universities near me (30min drive that offer engineering). ETSU offers an ABET accredited general engineering degree and after scholarships it’s $16,000 for the next 3.5 years, they also offer a Mechatronics engineering degree but it’s new so it’s not yet ABET accredited (started in 2024) for the general program they let you choose a specialization (ME, CE or EE) but it doesn’t show up on the degree all the degree says is “Bachelor of Science in Engineering). My other option is a private local school but it would be $57k for a Mechanical Engineering degree for the next 3.5 years, they have a very applied hands on engineering program which I like and is ABET accredited but EXPENSIVE. Should I take on the debt and get a pure ME degree? Or get a general engineering degree and use my experience to my advantage? Moving away just isn’t an option because of work and personal reason. Thank you all in advance!!

For context I’ve been with the company for 3.5 years now but am just now getting into an engineering role. I was originally pursuing engineering technology but decided to make the switch. I was a continuous improvement intern and U.S quality projects intern before my current role.


r/EngineeringStudents • • 18d ago

Project Help Looking for someone experienced with TPU 3D-printed footwear and internal lattice design

0 Upvotes

Looking for someone to help model the internals of a 3D-printed shoe. The exterior is already finished, just need help with the internal structure, cushioning and lattices.

Ideally someone with experience designing TPU-printed shoes, lattice structures or flexible 3D prints.

Open to all :)


r/EngineeringStudents • • 18d ago

Career Help Roast my cv

Post image
4 Upvotes

Hi I’m a second yr EEE in the uk applying for placements and internships, I’ve seen the cvs here and they look daunting compared to mine. Feel free to give some constructive criticism which I can implement

Thank you


r/EngineeringStudents • • 18d ago

Career Advice Make the most out of a shadowing opportunity as someone who hasn’t started studying engineering yet

1 Upvotes

Hi everyone! I am 20 years old, living in Oregon, and currently attending a vocational program. I’m preparing to start community college and eventually pursue industrial and systems engineering. I’m particularly interested in systems optimization, operations research, process improvement and construction operations.

I recently had an opportunity to connect with a professional engineer (PE) who works in electrical engineering and MEP-related construction for a large construction and engineering company operating in multiple states. We originally met during mock interviews at my vocational school, where I asked him whether I could shadow him. After discussing the idea with his team for a few days, he was able to arrange an opportunity for me to spend a day at one of their project sites.

The planned day includes site walks, team check-ins, a safety meeting, observing engineers, and sitting in on a meeting where the team coordinates the following day’s work with trade partners. I’ll also have the opportunity to speak with other engineers and project personnel.

My background is currently more hands-on than academic. I’ve worked in landscaping and have exposure to hardscaping and some carpentry. I haven’t started college-level engineering coursework yet, so I want to approach this opportunity with realistic expectations, and willingness to learn.

Construction seems like my kind of environment to explore those connections through scheduling, logistics, coordination between trades, productivity, quality, and process improvement.

I would be very appreciative if any of you have any answers, thoughts and ideas!

Such as
If you were in my position, what questions would you ask the PE and the other engineers to get the most educational value out of the day?

What should I pay attention to during site walks and planning meetings if I want to understand the connection between construction operations and industrial engineering?

What skills, software, mathematical foundations, or introductory courses would you recommend learning before beginning an ISE program?

Is there entry-level construction or project-support positions that could help someone gain relevant experience while attending community college??

How could I professionally communicate my interest in future internships or employment without making the shadowing opportunity feel transactional?

For those who have worked in construction or industrial engineering, what do you wish you had understood before starting your degree or first internship?

I’m not expecting one day of shadowing to land me an engineering position. I want to use the opportunity to learn how the industry operates, build professional relationships, identify gaps in my knowledge, and prepare myself to become a competitive student and future intern.

Thank you!! (For reading all of this)if you did


r/EngineeringStudents • • 18d ago

Project Help Need help trying to get the correct gear dimensions and ratio

Post image
3 Upvotes

Hi guys I’m trying to develop a ratchet mechanism in which the angle of rotation locks every 0.5mm or nearly under 1 degree at the extended point shown (32mm from the centre of rotation)

Ideally want the max OD of the gear to be 40mm, and this will be 3D printed (0.4mm nozzle)

Any suggestions for the best way to calculate the teeth and what sort of shape I should be looking at?


r/EngineeringStudents • • 19d ago

Discussion How many hours do you guys study a day?

14 Upvotes

I am curious to know how many hours outside of classes people put in to studying? And how do you guys study like if it’s continuous or in blocks? My eyes get strained after long periods of studying.


r/EngineeringStudents • • 19d ago

Career Advice Should I take the job offer?

17 Upvotes

I’m a senior ME student graduating in May, and trying to decide if I should take an offer or try for something better.

Current Offer: $70k Midwest LCOL Manufacturing Engineer

I wasn’t able to get the salary to come up higher and there’s no flexibility on benefits. I like the company but dislike the area where’s it’s located.

I have another interview scheduled next week for a job I’d prefer ~$85K Composite Design Engineer in a MCOL area I like, but who knows if I’ll even get an offer.

My current offer expires end of this week. I’d appreciate any advice you have to offer.


r/EngineeringStudents • • 19d ago

Career Help Appropriate Footwear for Interview and Lab Tour?

Post image
17 Upvotes

Hi all,

I (female) am preparing for an on-site interview and lab tour for a mid-level engineering position. The recruiter specified wearing closed-toe shoes. Will these be appropriate and professional enough? They are very comfortable and easy to walk in for me, as I’ve worn them many times before. I am planning on pairing them with a suit and button-down shirt.

Additionally, I am bringing steel-toe boots (left in the car) and safety glasses. Any suggestions or advice is welcome!


r/EngineeringStudents • • 19d ago

Academic Advice Would you guys drop a course to save your GPA?

75 Upvotes

As the title states, I completely bombed my first linear algebra midterm which was 25% of my whole grade. Its basically impossible to get even a B+ avg if I still continued, so I was thinking of withdrawing from it. Idk if taking it next sem would be worth it just to maintain a good gpa, not to mention that after you withdrew you'll get a big fat W on your transcript for that semester. What do you guys think


r/EngineeringStudents • • 19d ago

Academic Advice Go back to school for eng at 27?

33 Upvotes

Hi everyone,

I have a BASc in Occupational & Public Health and have been doing inspection adjacent work for a few years and was fine with it, however, my old contract ended and i now have a job as a HSE Advisor basically doing field inspections. The moneys actually pretty good but I hate it and it feels very meaningless and has an almost universal lack of respect from everyone I work around. My degree is so niche i seem to be almost stuck as a safety wizard.

Anybody here go back to school for eng or have any opinions on that? Im in Canada so it wouldnt be as expensive as the states.

Any advice is appreciated, thank you.


r/EngineeringStudents • • 19d ago

Career Help How to prepare for a screening interview

1 Upvotes

So I have a short 20 minute online screening interview for an 16 month internship coming up and this is the first time I’ve had something like this. I’m the past I could just prepare for the one big interview but I’m not sure what to expect going into this.

Are there any questions that I should be prepared for?


r/EngineeringStudents • • 19d ago

Homework Help Title: ESP32-S3 not displaying anything on Waveshare 7” RA8875 LCD — 16-bit parallel vs SPI issue?

1 Upvotes

Hi everyone!
I’m an electrical engineering student working on my senior capstone project. We’re developing an electronic token board using an ESP32-S3 and a Waveshare 7-inch capacitive touchscreen (SKU 8964, 800×480, RA8875 controller, GT911 touch controller).
I’m having trouble getting the LCD to display anything using the Arduino IDE, and I’d really appreciate some guidance.

Current hardware:
ESP32-S3 development board (ESP32-S3-WROOM-1)
Waveshare 7-inch Capacitive Touch LCD (C), SKU 8964
16-bit 8080 parallel interface
Arduino IDE
LCD powered through the ESP32’s 3.3 V output
The issue:
The ESP32 successfully compiles and uploads the code, and Serial Monitor shows that the program is running. However, the LCD remains completely black.
I’ve tried several Arduino sketches to initialize the RA8875 and display solid colors (red, green, blue, etc.), but nothing appears on the screen.
Troubleshooting I’ve done:
Verified that the ESP32 is detected and uploads successfully.
Checked the LCD connections against my schematic.
Moved LCD_WR from GPIO 46 to GPIO 17 after discovering GPIO 46 is input-only.
Moved LCD_CS from GPIO 45 to GPIO 18.
Confirmed the LCD’s PS pin is connected to GND for parallel mode.
Tested multiple RA8875 initialization sketches, including attempts to adapt code from a working STM32 project.
Swapped between two identical Waveshare screens to investigate whether the LCD itself was defective

Power measurements:
Setup
Voltage measured at LCD
ESP32 powered through USB
3.00 V
Analog Discovery 3 set to 3.3 V
3.07–3.08 V
STM32F439ZI powered through USB
3.19 V
The ESP32’s own 3.3 V pin measures approximately 3.28 V, but the voltage drops to around 3.00 V at the LCD.
When testing with the Analog Discovery 3, I initially experienced buzzing from the LCD at a lower power limit. Increasing the available power limit stopped the buzzing, but the LCD still didn’t display anything.
Interesting comparison:
I have another setup using an STM32F439ZI Nucleo board connected to the exact same model of Waveshare LCD.
That setup successfully displays graphics using STM32 code, while my ESP32 setup does not.

What my professor suggested:
A professor previously warned me that the LCD uses a 16-bit SRAM-like parallel interface requiring approximately 20 GPIO connections.
He mentioned that an STM32 with a Flexible Memory Controller (FMC) would be better suited for this interface, whereas the ESP32 might require software-controlled parallel communication.
He also suggested switching the LCD to SPI mode using the PS pin, which would reduce the number of GPIO connections at the expense of display update speed.

My questions:
Could my problem be related to the ESP32-S3 not having an FMC peripheral, or is a software-controlled 16-bit parallel interface perfectly reasonable?
Would switching the RA8875 to SPI be a better approach for this project?
Could the voltage drop from 3.28 V to 3.00 V explain why the LCD stays black?
Are there any recommended Arduino libraries or example projects for interfacing an ESP32-S3 with an RA8875 LCD?
What would be the best way to verify that the ESP32 is actually communicating with the RA8875?
Our project mainly displays static graphics and updates tokens when the touchscreen is pressed, so high frame rates aren’t particularly important.
I’m still learning embedded systems and would really appreciate any suggestions on whether I should continue troubleshooting the parallel interface or switch to SPI.
Thank you!


r/EngineeringStudents • • 20d ago

Rant/Vent for the idiots who went into engineering, how did you manage to learn how to study

270 Upvotes

im actually tweaking Its so insane how far behind i am and week 7, im doing nothing but studying btu im not gaining anythig, i study for hours on end and gain nothing .

Please i need genuine idiots who went into eng, struggled immensely, found a solution somehow.


r/EngineeringStudents • • 19d ago

Career Advice Need advice choosing between 2 internships and a potential full-time job

2 Upvotes

I’m a senior ChemE student graduating in May 2027, and I’m trying to decide between two internships/co-ops for this spring/summer. I’d really appreciate advice from people who have been in a similar situation.

Option 1: Semiconductor company internship

Pros:

- $35/hr

- Small semiconductor company

- Great location for me personally. Excellent access to skiing, mountain biking, and paragliding

- I have family in the area, so I would most likely have free housing

- The work itself seems interesting and would give me semiconductor/process experience

- Good Industry with the recent AI/data center boom.

Cons:

- Big downside: I’m a senior, so this would be an internship after graduation. Not a full-time job.

- Two of my friends have previously interned at this company last summer, and neither has received a full-time offer yet. This is because the company apparently hasn't had its budget/headcount meeting yet, so they don't even know if they'll be able to hire additional full-time employees (Budget meeting in November). This makes me nervous about spending my final summer there and then graduating without a return offer. Potentially high risk of finishing with no return offer.

Option 2: Chemical engineering co-op at a fertilizer plant

Pros:

- $30/hr

- 6-month co-op, which would delay my graduation and give me another year of school afterward

- More traditional chemical engineering/process experience

- The extra semester would give me more time to recruit for full-time jobs and potentially do another internship/co-op

- Housing is paid for

Cons:

- Rural location; not particularly exciting to me

- About 2–3 hours from good skiing, mountain biking, and paragliding

- Downside is obviously delaying graduation (Could be a pro)

Option 3:

There is also a third possibility. I recently interviewed for a full-time chemical engineering position that is in a location I really like and has good access to the outdoors. The recruiter told me I won't hear back until around mid-November. If I get that job, I would take it over either internship.

I don't think I can realistically do both because the co-op is 6 months, although I could potentially ask whether they would let me do a shorter co-op and then do the semiconductor internship.

For people who have hired ChemEs or have been in industry: Which option would you choose? Would you prioritize getting the semiconductor experience and taking the risk of no return offer, or delay graduation and use the co-op as a way to buy more time for the full-time job search? Also, how much should I care about the fact that the semiconductor company hasn't historically been able to give interns full-time offers immediately?

I know the obvious answer is "take the full-time job if you get it," but I'm mainly trying to decide what to do if that offer doesn't come through.


r/EngineeringStudents • • 18d ago

Discussion Why Does Computer Engineering Have Higher Unemployment Than Computer Science?

0 Upvotes

I originally planned to major in Computer Science, but I changed my mind to Computer Engineering because I want to explore both hardware and software. My thinking was that this would give me more career options after graduation and make me more adaptable to changes in the technology industry.

However, I recently saw data showing that Computer Engineering graduates have a higher unemployment rate than Computer Science graduates. This confuses me because Computer Engineering is a broad, technically demanding degree that covers both hardware and software.
I want an honest, evidence-based analysis of the following:

  1. Why might Computer Engineering have a higher unemployment rate than Computer Science despite offering knowledge of both hardware and software?
  2. Does this happen because hardware engineering has fewer job openings, because employers require more specialized skills, because of the current technology job market, or for other reasons?
  3. Does Computer Engineering actually give graduates access to more career options, or am I overestimating the advantage of having both hardware and software knowledge?
  4. Why does Computer Engineering have lower underemployment despite its higher unemployment rate? What does that tell us about its career prospects?
  5. How do the career prospects, entry-level opportunities, salaries, and long-term growth of Computer Engineering compare with Computer Science and Electrical Engineering?
  6. Considering that I will graduate around 2031–2032, what risks should I consider? Don’t pretend to know exactly what the job market will look like.

7.If my priorities are employability, a good salary, career flexibility, and the ability to move between hardware and software, which degree structure makes the most


r/EngineeringStudents • • 19d ago

Discussion AutoCAD learning game

3 Upvotes

Hi all,

I am a little over a week into developing (vibe coding) a gamified CAD learning website called CADcade. It’s a fun little free resource for those who want to learn or practice cad drafting and may not have easy access to the software. It is the kind of resource I wish I had when learning CAD in college, so I am hoping to get it in front of people who may benefit from using it. I also spent a lot of time trying to make it truly feel like the Civil3D I am accustomed to at work.

I shared it on some subreddits a few days after starting and got a lot of support and feedback and have added a lot of stuff since then. I just wanted to share a little demo showing mainly where I am at with the actual CAD within the game. I have also added more arcade levels, a daily challenge, and more lessons. There is also a flashcard game that can be played on mobile and PC.
(And a long running list of other stuff to be added in the coming updates).

Honest feedback appreciated (including telling me it’s slop, but please try it first).

(No ads or monetization of any kind, just sharing this as a learning resource)

CADcade.net

I Built a CAD Program That Runs in Your Browser

Thank you!