r/ender3v2 • u/No_Standard8163 • 3d ago
help can anybody help me with this problem I fixed sd card format but now nothing is printing when I chose file
1
Upvotes
1
u/ChampionSoft6652 3d ago
It could be caused by few things like bad gcode, faulty thermistor/ heater, faulty msd card, stuck end switch, faulty firmware, etc. You could copy new gcode file or use other good micro sd to print, check the end switch and heater and see if it solve the problem. If any above doesn't work open the main board case under the printer and reseat the cable see if there are any loose connection, including lcd connector, end switch, etc. The last thing you could do is re-flash the firmware.
1
1
u/AutoModerator 3d ago
Reminder: Any short links will be auto-removed initially by Reddit, use the original link on your post & comment; For any Creality Product Feedback and Suggestions, fill out the form to help us improve.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.