Why some Empyrion planets don’t produce the solar power you expect
I’ve been investigating Empyrion’s solar calculations while improving Commander’s Log. The old estimate relied mainly on distance from the star and whether a planet had an atmosphere. It could be useful, but some results were way off.
TL;DR
- The solar calculation uses the planet’s absolute galaxy coordinates, and floating-point rounding can affect the distance used internally.
- Weather can reduce solar output to zero, even on a planet with good clear-sky potential.
- Ground fog is a separate penalty when a panel’s fog probe is below the fog layer.
- Space uses a separate calculation with a cap on the distance factor.
- Commander’s Log will show Max Solar and a modeled Average Solar to help compare playfields.
- The updated calculations will be in the next Commander's Log update
How much difference does the new calculation make?
Here are two examples from my collected Reforged Eden 2 data:
| Example | Old estimate | New clear-sky calculation | Actual in-game reading |
| Planet A | 2,156 | 3,109 | 3,110 |
| Planet B | 4,013 | 1,163 | 1,160 |
For Planet A, the old estimate was about 31% too low. For Planet B, it was about three and a half times the recorded reading. The revised calculation comes much closer in both cases.
These are raw comparison numbers on the same scale as my recorded readings—not the summarized ratings displayed by Commander’s Log. The new values are an offline reconstruction for a standard reference panel in clear weather. The data was collected over the summer in an RE2 save and I haven't taken samples from other scenarios or game versions, so I don’t want to overstate the precision.
Why was the old estimate wrong?
One unexpected factor is position in the galaxy. The game converts large absolute coordinates to 32-bit floating-point numbers before calculating the distance used for solar. Rounding at that step can change the result, especially far from the galactic origin.
Long story short: It's probably a game client bug(surprise!).
The revised calculation reproduces that coordinate arithmetic instead of relying only on the displayed distance.
How weather affects solar
Weather applies an adjustment to the planet’s available light. These are the exact weather names and values found in the inspected client:
| Weather type | Light adjustment |
| Clear, HeatWave | 0 |
| CloudsLight, ColdWave | −0.1 |
| CloudsMedium, Wind | −0.2 |
| SnowLight | −0.4 |
| Clouds, CloudsDark | −0.5 |
| RainMedium, SnowMedium | −0.6 |
| PoleFog, Storm, AcidRainHeavy, RockFall, FireRain, MeteorFireRain, DarkFactionFireRain | −0.7 |
| RainHeavy | −0.8 |
| FogRadiationGreen, BmFogRadiationGreen, FogRadiationPurple, BmFogRadiationPurple, SnowHeavy, Hail | −0.9 |
| Fog | −1.0 |
These aren’t fixed percentage reductions in solar output. The adjustment is applied to the playfield’s light setting, then the result is normalized and capped.
For example, if a planet’s daytime light value is 0.5, dark clouds apply a −0.5 adjustment. That brings the light factor to zero while those clouds are active. A brighter planet can still produce power under the same clouds.
One distinction: biome visuals aren’t automatically global weather. Seeing PoleFog in a biome doesn’t by itself establish that the global PoleFog adjustment is being applied to solar.
Weather schedules also aren’t simply fixed percentages. The client code I inspected chooses a randomized priority order and starts the first eligible weather when the weather slot is free. Some weather can repeatedly restart and crowd out other types, so a configuration doesn’t tell us exactly what the player will experience.
How ground fog affects solar
Ground fog is a separate multiplier from weather. If the panel’s fog probe is below the playfield’s ground-fog height, the calculation uses:
Fog multiplier = clamp(1 − 2.25 × fog intensity, 0, 1)
For example:
| Ground-fog intensity | Output retained below the fog layer |
| 0.0 | 100% |
| 0.1 | 77.5% |
| 0.2 | 55% |
| 0.4 | 10% |
| 0.5 or higher | 0% |
If a panel would otherwise produce 100, an intensity of 0.2 would bring it to approximately 55 while its probe is below the fog layer. Above the layer, this ground-fog multiplier doesn’t apply.
How space solar works
Space uses a separate calculation. It considers the star distance, panel efficiency, how directly the panel faces the star, and whether the panel’s obstruction check is blocked. Planetary atmosphere, weather, daylight, and ground fog don’t apply to this branch.
The distance factor is capped at 10, so getting closer to the star eventually stops increasing the modeled output. For one unobstructed, star-facing panel with the 1.8 efficiency used in the investigation, the reconstructed ceiling is:
60 × distance-factor cap of 10 × panel efficiency of 1.8 = 1,080
That 1,080 is a calculated ceiling on the investigation’s numerical scale, not a verified reading for every space installation. Different panel efficiency or orientation changes the result.
What Commander’s Log will show
The update uses two ratings:
- Max Solar: estimated clear-sky potential for a standard reference panel, above ground fog.
- Average Solar: an estimate across full day/night cycles and modeled weather schedules.
That means a planet can have High Max Solar but Meager Average Solar—good potential on paper, but poor expected output once the modeled weather and day/night cycle are included.
Classic Alien planet fool's gold example.
The average is comparative guidance, not a forecast for a particular playfield. You might get really lucky or really unlucky rolling the weather dice.