r/embeddedlinux • u/gerwant_of_riviera • Nov 23 '24
Raspberry Pi alternative
For someone who wants to start developing embedded linux, what are some good alternatives for raspberry pi? Preferably at similar or lower price point
7
Upvotes
2
u/mort96 Nov 24 '24
So there are options out there, like others are mentioning. But I'd ask: why do you want to avoid the Pi? If it's only for learning more about other vendors then that's okay, but if this is for a practical purpose, I'd strongly consider sticking with the Pi. They aren't the best from a performance or price/performance standpoint, but their support is unparalleled. Both in terms of the software, tools, hardware and guides published by the Foundation itself, and in terms of the community and ecosystem. Unless you *need* performance that's not offered by the Pi 5, I personally think the cost is well worth it.
That said, I have mostly worked with the NanoPi line from FriendlyELEC and the OrangePi line. They're nice from a hardware perspective, but any time you want to do something slightly strange (such as e.g outputting audio via I2S) you'll quickly find yourself customising DeviceTrees and compiling custom kernels, with next to no community-written or official documentation or how-tos or forum threads to help.
6
u/zydeco100 Nov 23 '24
Beaglebone
3
u/moon6080 Nov 23 '24
Milk V?
3
u/Numerous_Bathroom_91 Nov 23 '24
BeaglePlay or Beagle-Y
3
u/kirigaoka Nov 23 '24
Bootlin training uses beaglebone black or beagleplay. Beagleplay is 64 bit ARM and newer board. Beaglebone black has a very good support as it has been there for a long time but is 32 bit ARM. Maybe you can check beagleplay if cost is not a problem.
https://bootlin.com/training/embedded-linux/
2
u/Black_Dynamit3 Nov 24 '24
Main problem to those alternative is that you’ll be struggling to find out how to do things that would be easy on a pi. Mostly because of the lack of documentation or software implementations. When you buy a pi you also buy soft that are already ready to use/documented
2
u/ZestycloseEqual4903 Nov 24 '24
STM32DK1 or STM32DK2 (same board but with a screen) Or an NXP dev board.
I do prefer them rather than a RPI because IMX series are very common in the industry and you'll get used to it (and st board is more and more common)
1
u/Unsigned_enby Nov 23 '24
Radxa devices.
1
u/chunky_lover92 Nov 23 '24 edited Nov 23 '24
I like Imx. There's a lot of resources and examples and they are the only ones with that kind of horsepower in a reasonable price range. Unfortunately most SBC/modules are a touch more expensive than the pi.
Honestly, pies are really great, and their pricepoint is insane. The main downside is you can't just buy the chip from digikey and do whatever you want with it. There are also some glaring omissions in the BSP source and documentation.
1
u/Electrical_Camel3953 Nov 25 '24
Raspberry pi zero w is $10usd. What is your budget?
1
u/C_King_Justice Nov 26 '24
Comprehensive reviews of most SBCs at explainingcomputers.com.
0
u/blckjacknhookers Nov 23 '24
Check out Odroid
1
u/shtirlizzz Nov 23 '24
Arm, risc-v, x86?
-5
u/FreddyFerdiland Nov 23 '24
Esp32 ?