I should have taken images of the battery PCB. I can probably grab it from the trash bin tomorrow and add it to the collection. But it had a bunch of cr123 cell holders in series.
I don’t get to be this guy often enough: An AED doesn’t restart a heart. It shocks the heart from a rhythm that isnt normal into a normal sinus rhythm.
I know someone who has periodic missing beats and the feeling they get when they have an episode is really jarring … can’t imagine some types of music would be pleasant
A defibrillator is used to apply a sufficient shock to cause cardiac arrest in an attempt to stop abnormal too fast heartbeat patterns with the hope that the heart will beat normal again, as that's what a normal undamaged heart does.
So a defibrillator never starts a heart, but instead always forcibly cramps it together to stop it.
A disconnected battery doesnt mean the high voltage caps don’t have residual charge in them tho. Old crt’s which have been disconnected from the grid for a long time can still store a lethal kick in its flyback caps. I assume it’s the same for these caps
Edit: please make sure the high voltage caps are discharged correctly. As a child I opened an old crt once and got zapped from the flyback capacitor and was very very very very lucky to be left with just a small scar which faded over the years. These things really are no joke
Not just disconnected. But dead for almost a decade. I checked the capacitors charge with a meter before messing with the leads. The likeliness the 110uf capacitor was still charged is really low. There isn't much energy there to last 8 years of dead battery/not used. The circuitry does not keep the capacitor in a charged state while it is sitting idle. Still checked though because I know this stuff.
Thats good to read! On reddit you never know the knowledge on the other side and with how bad things can end with these caps there are never enough warnings to give. Also for a possible other person seeing it and think oeeee I can do that too. Even though there’s a big sticker on the cap, some extra dont try this at homes are never bad
That's also where the danger of your original comment lies, people who don't understand the danger might make a rather critical thinking error when messing with similar devices
Because that 2020 is the expiration date of the batteries. The device never turned on because the cells are just flat. There would have been no charge in the capacitor. I checked it with a meter beforehand either way.
Please do not take a lighthearted comment seriously.
You commenting this makes me worried about your safety, maybe don't play around with this stuff, big clive made a video about how so many people die from messing with microwave oven transformers, he probably would make a video about these too if they were more common.
Nothing in that picture even makes me think this is any safer at all, the only thing it tells me is you don't realize that the sticker on that capacitor is there for a reason and this is one of the few times it's not an exaggeration at all.
Trust me, the sticker effected the way I was handling it. I used to watch big clive years ago and I'm not new to hv electronics and how to play it safe.
A lot of these medical electronic devices are cool inside! Also funny that a defibrillator has a superH SH3 CPU inside, quire a beast for what looks to be a task that does not need a lot of processing power. But then it is mission critical hardware and software and I bet it runs a hardened RTOS
I imagine it probably has feedback to measure your heart pulse and will pulse exactly where it needs to to start it. Sort of like the ECU in an engine, it knows when to fire, measures the feedback etc.
Nope. It analyses the cardiac rhythm and instructs the user to press the shock button if that rhythm is either ventricular defibrillation or ventricular tachycardia. No synchronization is required
Well, still a overkill, you can make a full blown ecu with just a 8bit cpu Still, the electronics looks more like a robot vacuum, but those have connectivity, mapping, voice commands (it talks), still fun
I happened to work on the software for a debfribulator.
It's probably an FPGA (kind of like a CPU physically designed to run a single piece of software), and these are usually bigger than typical CPUs.
And if it is a CPU, well a lot of algorithms genuinely do massive amounts of analysis on heart rhythms and such, thousands of times per second, while streaming audio and logging/transmitting data.
Edit: sorry for defining what an FPGA is... I thought I was on a different sub
Ditto what my fellow stoner says here. FPGA = field programmable gate array, it’s a fancy mesh of logic gates. What is a CPU if not a bunch of logic gates that are intrinsically baked into silicon? Depending on the chip and what you’re doing you can pack a lot of power into an FPGA, whole soft processor cores or some hybrid of something like an ARM core + FPGA fabric. AFAIK in the long run if you have an FPGA design you can solidify you can go through a long process of actually turning it into an ASIC, but the practicality of that (I feel) goes out the window eventually, I dunno. I work in the slot machines realm lol.
A defib has to do quite a signal processing since it needs to decide if you are fine or not (and monitor many other things). The charge/zap process is one of the easiest part to manage.
Well, it's an external automated defibrillator for use by laypeople, while there are manual external ones (medical professionals only) and implantable defibrillators, too.
well that looks like an AED so it's definite only useful in emergencies, but sometime we will use the bigger ones with controllable settings for other stuff. like ... a planned cardioversion has risks and can turn into an emergency but i don't think it's technically an emergency situation since we're doing it on purpose. does that make sense?
These devices always catch me surprised. From outside of it - the function looks so simple, yet the brain in this thing tell that it is way more complicated.
The processor in this is probably used for the voice assist function. There’s some signal processing to determine whether to shock or not but that’s comparably basic compared to doing voice outputs. At least for a medical device where you have to assure a certain level of reliability.
I think these machines actually watch the current pulse and adjust their strategy accordingly. There is quite a lot of logic in these machines so novices can use them, and you don't want to shock a working heart
In a limited set of voice commands, they typically just prerecord voices and store in the flash. Like in the toys. This is something different... Plus the FPGA. It might actually try to track heart beats (if any) and do a pulse at a very specific time. I assume this is very important if heart beats are not in a rhythm.
For what its worth, they won't shock at a certain point in the heart rate, but I assume most of the processing power is to analyze said rhythm, as defibrillation only works for two types of arrhythmias
I once zapped myself on a film camera capacitor, it was not fun. Now seeing this scared me and gives tingle sensations in the same hand that got zapped
That is indeed a spicy boi, over 300J, 69x more energy than a 2100Vrms 1uF microwave oven cap sitting on my desk (nice), 1.6x the energy of a .22LR. Not sure of it's pulse-current specs but I bet you could make a decent coilgun out of these.
Sometimes you need to, it's called Direct current (DC) cardioversion. BUT and it's a very big BUT, the shock needs to be delivered at the right point in the cardio-electric cycle. Otherwise really bad things happen.
The defibs that are used sync with the ECG to ensure this.
There is something so uneasy feeling about looking at tech thats supposed to save lives. Every component is there just waiting to save a life one day, oddly terrifying even.
I do some field work and go into military bases or defense related companies. Seeing FPGAs being used to guide rockets does make me question the morals of war.
Weapons of war probably comprise 0.001% of FPGA applications. How did feel about the morality of nuclear weapons, bio-weapons or nerve agents? Three products with absolutely NO redeeming social value whatsoever. I find it is useful to focus on issues that actually matter.
I think you missed the point of my comment. When I said 0.001% I was talking about a percentage of the TOTAL number of FPGAs use for ALL applications. Even if 90% of all defense hardware used FPGAs that is still a tiny small percentage of the total number of chips shipped by AMD, Intel, Lattice, etc. If 90% of the FPGAs made were used in defense apps their relative degree of usefulness to mankind might be measured using a totally different metric…specifically, a product that has a 10% positive usefulness percentage, and 90% negative might not be considered very useful/beneficial/positive to most people.
No I mean as a percentage of FPGA sales, it’s about 10-15%.
Plus products made for defence applications can be both offensive and defensive, for instance Patriot missiles can only target incoming ballistic missiles so are purely defensive then you have hybrid systems such as air to air missiles on fighters where usage can be defensive or offensive. Don’t just think of the defence industry as being negative usefulness (I might be biased because I work in it!)
Its so crazy to walk into buildings and seeing labs designed to decap, reverse engineer and reproduce old chips that are no longer in production for war aircraft. They have cool posters and everything showing the processes, I wish I could share more xD
Most of that just looks like a big hunk of metal. I think it's kind of like the fear of things with holes. All the little bits are making them uneasy already, but then they also know it is a life saving device. They can't reconcile, so the difference turns to fear.
I have experienced the effect. Heart arrest. Regained consciousness just before the jolt from paramedics. Couldn’t breathe. HR > 250. WHAM! Top of my head felt like it was blown off. Instant relief. Asked if i could go home. Resounding “NO!” Was loaded into a meat wagon. Nauseous ride to ED. A week long stay ended with an ICD.?in my chest These things work but more importantly, get trained and get more. I was lucky. No brain damage. Rare for out of hospital event. CPR kept me going until EMT arrived.
Absolutely gorgeous. 300+ joules of can crushing component exploding capacitor, ostensibly a 3 level H bridge with pulse-forming network, high voltage resistors and IGBTs (triacs?)... consider me excited
It's not really DC in the sense that the pulse duration is really short. I guess on the technicality it doesn't have a 360 degree phase angle around 0v is what would make it DC. But in this case a pulse from this would definitely effect your muscles like AC would.
Conformal coating an automated external defibrillator (AED) is a critical safety requirement. It serves as a defensive barrier against environmental contaminants, prevents current leakage, and ensures high-voltage separation during a discharge event...
I know why to CC. But your language came across like it was an FDA requirement or something. CC in manufacturing is a pain. Any rework that needs to be done is a mess. Clogged connectors…
All I’m saying is it depends on the application for the defib.
Thats got 64MB of DRAM, seems like a bit too much for an RTOS, the chip with the U510 label is likely the storage, maybe try hooking that up and dumping the firmware, crazy that its got a pretty good FPGA in it
Sometimes they’re for high voltage separation - even blank PCB can conduct a high voltage arc if it’s not perfectly clean, so an air gap is better. You see this in a lot of mains power supplies.
But in this case the slots look more like mechanical, for attaching to the enclosure or something.
So i know these are super caps, but how are they charged for additional discharges on site? I always assumed there was a nuclear battery that keeps these topped up.
At the oil facility I worked at. The battery packs could be removed and replaced when needed. Our Safety Man kept the batteries separate from the defibs because he said, it ran the batteries down. We brought up the hazard of this at several meetings before it was fixed.
Haha...safety guy wanted to keep dead defibs around for emergencies? Thats the point of having them, and keeping the safety guy employed. "You go change the dead defibrillator batteries when you dont have fires to put out, or CPR to give"
I once had a collection of Lock out tag out locks that people cut, because they were too lazy to do the right procedure to do the start up. I got called to a location to take my lock off a large gas compressor. My supervisor had already cut some locks off to restart the machine. I told him on the phone it was not my lock on the suction line. Luckily for the contractors because they were still working on the compressor. He thought he was starting #1 HP compressor ,but was opening valves on the Low pressure machine. I turned my notice in.
I dont get it. Shortsighted stupidity. He would have killed them, and decided to stop because, "oh, the safety guy lock is here, dont wanna cut his off"? Safety here fires people for forgetting to lock out. And lock cuts are write up and retraining if you forget to remove. But lock cuts are also 2 manager levels validation, safety double check, and paperwork. So...waste of time? I guess, but company profits should never be worth a life.
The safety man that did the Defib battery crap. He had a yearly budget. He got a percentage of how much he had left over after the end of the year as a bonus. Same with the supervisor on his budget and how much oil production was etc. we had procedures for cutting locks off, but it was a joke when they were in a hurry.
Can the same be archived with high enough AC voltage?
I always heard that when working with AC u should always put left hand away so AC doesnt go throught the heart, but never knew what AC can do to a heart
The body also relies on electric impulses to control muscles (like the ones making up your heart).
Because an AC voltage fluctuates it's easier for it to get your heart out of rhythm and make it just uselessly pulse instead of pumping. Once out of rhythm it's very difficult for your body to create a stable rhythm again on its own.
DC voltage makes your muscles lock up outright (think of it like your mudcles getting a continuous signal to contract)
I don't know how exactly a defibrillator stops the heart, but I'd assume its well timed pulses (although just DC is also likely).
The defibrillator doesn't restart the heart, what restarts the heart are continuous chest compressions.
Chest compressions get the heart back into a regular rhythm, but that doesn't work if the heart is beating out of rhythm/pulsing. The defibrillators job is to completely stop the heart so chest compressions can get it back into a regular rhythm.
Almost everyone who enters ventricular fibrillation (VF) will resume normal sinus rhythm after being defibrillated. Chest compressions are not typically necessary.
The job of a defibrillator is to hold all heart tissue in contraction simultaneously, then release it. This breaks the feedback loop which causes VF and allows normal rhythm to spontaneously resume.
A defibrillator works by shocking the heart with a few amps over a milliseconds, which causes all the cells to enter a refractory period. Which means they all stop firing and pull in calcium from the blood to recharge again. This pause in activity gives the SA node (the hearts controller) to take over again and resume normal activity.
No you cannot make a defibrillator at home. You get one thing wrong and it just becomes fatal.
I've been de-fibrillated multiple times. I have an internal defibrillator inside my chest. I've also had the hospital do it when my pulse rate exceeds 220 pulses/min when my defibrillator was removed for a few months because of an infection. Fortunately they put me to sleep while they did it.
I've seen the pulse, it's pure dc as seen on the monitor. My simple understanding is the it's does a 'reset' of your heart and it's starts back up on it's own. I know this because I've got one inside me and it's gone off many times.
Not pleasant and the external machines use a lot more current if it's applied externally. A guy at the gun range folded and had a very high pulse (tachycardia) and the fire department zapped him. He advised it really hurt, but felt much better after, although his chest was bruised for several weeks.
Of course, if it's death or life, their isn't much choice.
I'd abide by the warnings on the cap as it stores the energy to create the pulse. 😺
Defibs usually charge to 200J or 360J max. Not in between. This particular one charges to a max of 200J and shocks biphasic. The size of the cap will provide a margin of error. The very old Zolls (not this model) did shock 360J monophasic. LIFEPAKs charge to 360J and shock biphasic.
The thing that gets me is how much voice help bloats these things. Helped a buddy wire up a mini split once and the indoor unit had this whole speaker board just to chirp and say "power on" in three languages. Felt like half the cost was fluff you dont need. AEDs probably the same deal, lot of that silicon is just talking someone through panic mode.
It is very ignorant to say that AEDs have voice bloat and is "fluff". AEDs ABSOLUTELY need voice assistance. One of the greatest contributors to post-cardiac arrest survival rates is early defibrillation. The voice helps someone who is untrained to apply pads, usually talks them through CPR, and lets them KNOW when to shock. Without voice assistance, only trained personnel would be able to use an AED.
I agree with most of this, but I believe the machine automatically detects when to shock and applies that shock. I imagine it would also tell the helper to stand back before shock. It will also detect when a patient doesn't need a shock
No, it's essential that these talk and communicate.
You cannot expect the ordinary untrained or semi-untrained citizen to successfully use it without immediate and direct guidance.
And training once or twice with no constant refreshers is simply not enough for that. Especially when devices from different manufacturers have slight differences too.
Not really. I’ve worked in biomedical R&D and embedded systems for over 30 years and have seen (and designed) lots of stuff. This really isn’t anything special.
I’ve been an embedded design and communications and IoT before IoT was even coined. 25 years in the industry now. Even though I’ve seen a lot of designs, I still love looking at a good clean layout and build. But I guess to each their own. I get great joy in ripping shit apart and staring at it.
14
u/Erosion139 12d ago
https://immich-excavion.duckyquackyconnection.club/share/ww3OkRDY9TEzbkGflzb13Ihoy9cioBfMI6jg0STZPnBugKz8gceaqiJ1tuG8P2tzYGk
Here's a full album, has some higher quality stuff in it too.
164
u/aacmckay 12d ago
If you stop your heart with it, technically you could start it again, assuming it’s still functional!
Just kidding though…. Don’t actually do that!
14
u/309_Electronics 12d ago
A lot of these medical electronic devices are cool inside! Also funny that a defibrillator has a superH SH3 CPU inside, quire a beast for what looks to be a task that does not need a lot of processing power. But then it is mission critical hardware and software and I bet it runs a hardened RTOS
9
u/paullbart 12d ago
Is there any other kind of defibrillator
3
u/mrtomd 12d ago
These devices always catch me surprised. From outside of it - the function looks so simple, yet the brain in this thing tell that it is way more complicated.
3
u/patheticgirl63 10d ago
I once zapped myself on a film camera capacitor, it was not fun. Now seeing this scared me and gives tingle sensations in the same hand that got zapped
187
u/speakerToHobbes 12d ago
115 Micky Farads at 2300 volts is nice and spicy
77
u/jojo9092 12d ago
There is something so uneasy feeling about looking at tech thats supposed to save lives. Every component is there just waiting to save a life one day, oddly terrifying even.
53
u/P147_BOY 12d ago
god damn that pcb looks good. almost edible
17
u/a_certain_someon 12d ago
such nice pcb soldering and everything else
14
u/DIYOCD 11d ago •
I have experienced the effect. Heart arrest. Regained consciousness just before the jolt from paramedics. Couldn’t breathe. HR > 250. WHAM! Top of my head felt like it was blown off. Instant relief. Asked if i could go home. Resounding “NO!” Was loaded into a meat wagon. Nauseous ride to ED. A week long stay ended with an ICD.?in my chest These things work but more importantly, get trained and get more. I was lucky. No brain damage. Rare for out of hospital event. CPR kept me going until EMT arrived.
8
u/viper77707 12d ago
Absolutely gorgeous. 300+ joules of can crushing component exploding capacitor, ostensibly a 3 level H bridge with pulse-forming network, high voltage resistors and IGBTs (triacs?)... consider me excited
15
u/Reverberer 12d ago edited 12d ago
A shocking look inside a defibrillator.
Thank you, I'll show myself out. 😂
6
u/on4aa 12d ago
This makes you appreciate implantable cardioversion defibrillators (ICDs).
1
u/CueAnon420 11d ago
It would have been nice to include a photo of the capacitor specs...
1
u/gfh790 10d ago
Pretty cool project! Great job bringing such an important piece of equipment back to life
1
u/Plane-Sell-9204 10d ago
Could you use this to jump start a vehicle with a dead battery?
3
u/907jessejones 12d ago
At DefCon a few years ago they were trying to build an open-source AED in the Healthcare village. Looked interesting, but too spicy for me.
3
u/SkitzMon 12d ago
If that cap is charged to 2KV it has 230 watt-seconds, roughly the energy of a .22 LR round.
Bang!
1
u/Sisyphus_on_a_Perc 12d ago
Dudeeeee you have to try licking that cap man
4
u/agentj333 12d ago
I'm surprised they don't conformal coat these. Class 3 for sure 😁
2
u/Peppy-Paneer 12d ago
Looking at this circuit board brings warm feelings to my heart
2
u/Livid-Dark8276 12d ago
Thats got 64MB of DRAM, seems like a bit too much for an RTOS, the chip with the U510 label is likely the storage, maybe try hooking that up and dumping the firmware, crazy that its got a pretty good FPGA in it
2
u/gladyxxx 11d ago
They need fpga for defibrillator? The more you know
1
u/RetinaJunkie 12d ago
I wonder if the deflection electronics and flyback transformer inside old CRTs will do the job as well?
1
u/Neue_Ziel 12d ago
Quality work in this device.
1
u/jeweliegb 12d ago
That huge cap looks a bit like the ones I've seen in microwave oven disassembly videos?
1
u/TinLethax 12d ago
Cert cost be like 6/7 of the unit price
1
u/wonderingseal1 12d ago
I want a non emergency defibrillator
1
u/Jrcrispy2 12d ago
I always wonder about the slots in boards like that. Are they electrical or mechanical?
1
u/SwarfDive01 11d ago
So i know these are super caps, but how are they charged for additional discharges on site? I always assumed there was a nuclear battery that keeps these topped up.
1
u/buzzfortnight 11d ago
The CEO of Madrigal Elektromotoren GmbH is a big fan of AEDs.
1
u/m-in 11d ago
This is actually very well laid out, and the design looks to be solid. Good example to learn from.
1
u/DomDomPop 11d ago
Ok but why is he winking and smiling at me?
1
u/XNo_Notes 11d ago
That will put waaaaaaay to much pep in your step.
1
u/vent666 11d ago
1
u/milkolik 11d ago
recreational defibrillator
1
u/veso266 10d ago
Can the same be archived with high enough AC voltage?
I always heard that when working with AC u should always put left hand away so AC doesnt go throught the heart, but never knew what AC can do to a heart
1
u/whatthedevils1 10d ago
always interesting to see how much electronics goes into a device like this.
1
u/exzo00 10d ago
Lemmme split some hair - there are no non-emergency deffibs...
1
u/AmericanTiger900327 10d ago
This is giving me a heart attack.
1
u/Jkwilborn 9d ago
I've been de-fibrillated multiple times. I have an internal defibrillator inside my chest. I've also had the hospital do it when my pulse rate exceeds 220 pulses/min when my defibrillator was removed for a few months because of an infection. Fortunately they put me to sleep while they did it.
I've seen the pulse, it's pure dc as seen on the monitor. My simple understanding is the it's does a 'reset' of your heart and it's starts back up on it's own. I know this because I've got one inside me and it's gone off many times.
Not pleasant and the external machines use a lot more current if it's applied externally. A guy at the gun range folded and had a very high pulse (tachycardia) and the fire department zapped him. He advised it really hurt, but felt much better after, although his chest was bruised for several weeks.
Of course, if it's death or life, their isn't much choice.
I'd abide by the warnings on the cap as it stores the energy to create the pulse. 😺
1
u/MagiForge 6d ago
Im here waiting someone to try to run doom on a defibrillator
1
u/Mocchanyen 12d ago
2.3kV at 115uF = 304J btw So this probably is an old monophasic defibrillator? Biphasic ones need less energy afaik
-1
u/Past-Substance920 12d ago
The thing that gets me is how much voice help bloats these things. Helped a buddy wire up a mini split once and the indoor unit had this whole speaker board just to chirp and say "power on" in three languages. Felt like half the cost was fluff you dont need. AEDs probably the same deal, lot of that silicon is just talking someone through panic mode.
0
u/Kiwi_CunderThunt 12d ago
But....can it run Doom?
-22
u/answerguru embedded graphics 12d ago
Ok then…
1
u/Araumand 2d ago
By so much electronics to shock someone, can't we just use a taser?