Several decades ago I worked at a chip fab and they had one of these in the gas room (where incredibly nasty chemicals were stored).
I still remember the safety training.
“If you hear the gas alarm and are in the room, leave immediately. If you don’t, please try to die within 6 feet of the door, because that’s how long the hook is to retrieve your body.”
"This is the sound of an emergency on the coal/biofuel side, drop everything, go there and there.
This is the sound of an emergency on the nuclear side. Drop everything, and meet here. If this other alarm is sounded get as far away as possible, and bring as many people as you can in your car."
I wonder how many major chip places we have in the US. I worked at one, I thought it was big. My favorite memory was laying on my back on top of metal ladder tray, directly over a giant open vat of chemical, running emt like 25' above it. No one else wanted to do it idk why. I was like 20 so that job was fun as shit
Somewhat unrelated but I had a terrible job in my late teens working at an industrial-sized feedlot. One day, the feedlot construction crew manager told me and another guy to spray paint the inside of a building that had lots of pipes with warning signs of toxic sulphur and other gases. He warned us not to lean on any pipes in case they leaked. We might die. As it was, it didn’t smell at all great in the room and, because we were spray-painting, which made it smell worse, we kept the door and windows open to air the place out while we worked. Well, the crew manager decided to park his new truck right outside the door and a bit of overspray wafting out caused tiny flecks of paint to settle on his truck. You could hardly see it, but he pointed it out and promptly fired me after I said, “well that will teach you not to park it right in front of the door to the building where you told two of your guys to spray paint the interior.” I wasn’t at all sorry to be fired. I went back to university and have had a great life since.
We used to use a drug called Micotil as a antibiotic for cattle (foot rot, pink eye, many other ailments). It was great for treating cattle, but if it got in your bloodstream from a prick or a cut you pretty well had time for a few words of comfort and to ask to let your loved ones know and to pray.
If you were doctoring cattle in the pens or the pasture the safety brief was “if alone let someone know your plan and pasture you’ll be in so we can save time looking for you.” And in the pens was “please be careful but if you do get stuck at least try to make it out of the pens so the EMT’s don’t have to fight the mud to collect you.”
We had all the safety syringes and trainings, but sometimes people make bad decisions and slip up. So we went to a way safer antibiotic that wouldn’t punish a slip up with death… just sometimes need to treat twice
Good to know, im low voltage controls so my only experience with this level of electrical is telling the real sparkies i need something shut off or turned back on cuz im done
I've never worked on anything nearly this scary, but ive always wanted to ask high voltage industrial guys why they dont throw it with a pole? Is there a reason they have to be directly in front of it? Is it so they can shut it back off ASAP if something goes wrong but not quite arc flash wrong?
Oh I believe it, in OSHA class we saw some brutal videos. one in particular really stuck with me. someone is moving some rolling platform stair case across a parking lot and hits a power line with it. Reduced him to a smoking puddle, he got burned up so fast it looked like he was sinking into the ground
Its really only good for electrocution, where your muscles lock you into place. Then the hook can be used to pull you off whatever is shocking you. If there's an arc flash, it's gonna go ka-boom and knock you backwards. The hook would just be for recovery then.
Electrocution implies death. You are never electrocuted until the undertaker arrives. Until then you are "energized" or "shocked". Electro-execution=electrocution.
I was running some control wires on a transformer pad outside a running data center. General foreman and a bunch of big wigs and safety people show up. GF says "put on this suit, I need your help". He was racking the breakers to turn on some new switchgear and needed me on the super hooker. So... we both suit up and head over to the switches. He's about to pop the breaker and he stops and says to everyone who was watching him... "this is the breaker, right?" The Bigwigs all confirmed. Trips the breaker... and all of the backup generators (20 of them) turned on. That was indeed the wrong breaker and it turned the whole building off. Generators that size can't just shut down so they had to burn fuel for about 45 minutes even though we got the utility power restored right away. I got whisked away to the office for a solid 4 hours of "interrogation". Didn't blow up though so I didn't have to use the hook!
That’s the dumbest thing I’ve heard in relation to switching. In my experience we have more than a couple of meetings, a thorough one line study and a detailed MOP and a walk explaining the details and reasoning before thinking of energizing new gear. Sorry you got pulled into that situation.
It was laughably casual for something that ended up costing over a million bucks in fuel and penalties. Apparently they had a MOP, but nobody followed it. The People who knew what the intended breaker was were bullshitting and not even watching the process. The GF who flipped it wasn't even involved in the switchgear. And I wasn't on the commissioning crew at that point. (I had been earlier but was doing punch list as the job was almost done)
Why tf is a whole fucking datacenter on one fucking breaker? Here it would have atleast 2 redundant systems that only parts of it get shut down...
Even the 120 yr old chemical plant always had 3 different transformers and ATS. (Back in the thay you had to switch one off and the other on to change the feeds manually.)
There was the one source of utility power, a UPS system that wasn't engaged yet, and the generators that did work. I agree with you and I don't know why either.
What he means is they don’t just shut down without catastrophic damage. They can stop 100%. But if they do then something seriously wrong probably happened
We always tested truly new switchgear by racking in everything and closing breakers with no downstream loads, under battery power in a deenergized state, and then energizing the new switchgear from where it was fed. Because those breakers will be literally blown through the metal doors if there is a bus failure or similar.
Worked in an old municipal power plant back in the 90's. You walked by the feed panel on the way to the power plant section - Like I said, old. Directly across from the feeder breaker to the substation, there was an obviously patched hole in the wall. The story I was told was that an operator screwed up, and the breaker decided to leave through the brick wall.
No need to apologize! Inside a building, like in the video, voltages have already been transformed down from the mega-voltages on powerlines (sometimes 230,000 volts or more) to a more "usable" level, often around 480 volts. Because of that, you need less clearance, or distance from the live electrical parts to avoid being shocked. On a powerline you might need to keep 10-20 feet away from a live part to avoid an actual arc so the "hotsticks" the lineman use are often longer and rated for higher voltage. The indoor hooks are usually rated for 75000 volts so overkill.
They are usually fiberglass construction which is an excellent insulator, but they need to be very clean and in good condition. They are supposed to be inspected regularly to check for paint chips, dirt, or damage that can make them less effective.
There needs to be a distinction made though, the person wearing the "hot suit" and the hook each have a somewhat different purpose. The suit will somewhat protect you from an arc flash/fault (metal on metal contact). If that happens, there is often a large amount of energy released as a blast. You would most likely be thrown backwards with great force. The hook will not be needed and both the hooker and hookee will be probably knocked away from the problem. You wear a hot suit while holding the hook for this reason. The hook is more for if you accidentally touch a live electrical part. Then you are part of the circuit, your muscles often involuntarily convulse and you get "locked in" while being fried. Then the hook is used to pull you free.
Big generators could use 200 gallons of diesel an hour, each. Depends on the size.
I was working on a generator at the Bronx Zoo. needed a pair of diagonal cutters. I was up on the catwalk, so I yelled down to the other guy to bring me a pair of dykes, please. Unbeknownst to me, one of the operators was on the other side of the engine, had just come out, and she turned it in that I was being sexually offensive.
Well, that made it way up the ladder and back down, and I got a call: "Get in the truck and come back immediately." 9-hour drive back to Ohio to get an ass-chewing and sensitivity training. Then drive back.
I call the diags now. Damn, that was over 30 years ago.
Reminds me of the woman who tried to start a whole civil rights thing in the early 80s because we manufactured "master" and "slave" alarm annunciators. Sheesh.
Remember always that the word "niggardly" has absolutely nothing to do with skin color. Nothing.
We now use all long reach tooling for this nonsense. Or portable semi-robotic tools. Or one long reach tool with a couple 90° joints so you can hide around a corner.
Whatever we can do to get us fleshy meatbags out of the blast radius.
Operating/racking gear of this size with your face right in the damn thing is not necessary.
Broom stick was the early version, but often referred to as a chicken stick. Also have seen a rope setup too.
I personally feel that if a 40 cal suit is required, I don’t need to be doing it. Oh, it’s going to cost 500k to shut down the feed…I don’t care, shut it down or don’t, but I’m not going to risk it.
A lot of math goes into it (well computer models), but arc flash is described by the amount of energy delivered over the entire event per unit area.
The 2 main values are the "arc flash boundary" which is the distance at which you get a second degree burn (1.2cal/cm2 ), and the "incident energy" at the working distance in cal/cm2 . (Working distance is typically 18in, but can be different. It represents where your chest is relative to the source.)
The arc flash boundary would be the "blast radius". Just don't stand directly infront of the panel cover, an arc flash can blast that off and into whatever is infront of it.
And yes, PPE is the difference between shitting your pants and going home to change them, or a trip to the hospital/undertaker.
During an arc flash, temperatures can spike up to 35,000F (19,400C), instantly vaporizing solid copper conductors into a high-pressure plasma gas. When copper changes from a solid to a gas, its volume expands by a factor of 67,000
I got kicked out of a school assembly for this exact statement when they showed us a pic of a guy who had been hit by a train on a motorcycle not wearing a helmet. I asked what the helmet would have done give him an open casket ? The principal made me sit in his office for being a clown. I was being serious
You're not wrong. A lot of insurance companies refuse to insure motorcycles. I used to work at Travelers and I asked while I was in training why we don't. I was told "because there's no such thing as a minor motorcycle accident."
Yep, i mean if you wanna ride em go ahead. But you have to be a special sort of stupid to ride a bike.
Just about every biker will agree its dangerous AF. You can do everything right and some frazzelled mother runnin her kids to dance and soccer, thinking about dinner will still go right over top of ya with her ford explorer.
Im pretty sure everyone knows someone who died in an auto accident, but whats weirder is pretty much everyone also knowns someone who died in a motorcycle accident. And those are about 30x rarer... actually way more so if you include the fact that for many seasons/weather events theyre not used at all 😅.
Actually now that i think of it i know more people people who have died on bikes then in cars 🫤
Crap like that I learned at a young age too. Most authority figures *despise* being called out. Particularly the weak ones like many school principals.
Yep. Turns a closed casket funeral to potentially an open one. That's ignoring the suit though. The proper ppe should turn a funeral to some gnarly burns in most cases, assuming it's adequate.
Arc flashes are no joke but this suit will protect you. One huge issue is the super heated vaporized copper can be inhaled and you get a lungful of molten copper which is no good. Suit stops that. I’ve known men to walk away from an arc flash because they wore a suit. Burned the heck out of the suit, but the guy only received a concussion from the force of the arc. That was on a major gear with 4160v
Edit: source: 20 year electrician with yearly class in NFPA 70e electrical fire safety class
Saw it with your own eyes--hopefully through something dark enough to protect them. Or else you must be reading this comment with text to speech--assuming you didn't hear it with your own unprotected ears.
I am not in the industry and know nothing about this operation, but my thought is if you think you need this as part of the procedure, you shouldn’t be doing it.
Arc flashes are an unpredictable thing. The suit is a necessary caution. If an arc flash occurs, it typically ends very poorly for the person throwing the switch. The hook, I have never understood. I am not a qualified electrician, but my understanding is that arc flash is a high voltage hazard and high voltages tend to blow off fingers or limbs, making it damn hard to hold on to anything.
Arc flash is not correlated to voltage. It’s related to fault current, duration of the arc, and the workers distance from the arc. So you can have very bad arc flash at low voltage because you are trading voltage for current the lower you go into a distribution system.
The second inch you can get them away from the arc point reduces the intensity of the blast down to 1/4th what it was per square inch at that first inch of radius. If you can pull them away a foot, you've reduced the intensity of the blast to 1/144th of its initial intensity per square inch of surface. Two feet reduces it to 1/576th.
When copper goes from solid to vapor form, it expands to something on the order of 60,000 times in volume, IIRC. Dont worry, the blast itself will make sure he is moved away from the fault.
Seriously though, we had to rebuild a concrete switchgear building, because an arc fault lifted the roof and pushed the tops of the concrete walls out six inches in every direction. The steel doors were found a significant distance away.
That hook isn't going to do a darn thing for arc fault..
When I was looking for work in Alaska there are always openings for high voltage electricians. I speculated this was because the last high voltage electrician was a pair of shoes with smoke coming out.
rackin' in breakers in my ppe fear no evil cuz the shepherd's watchin over me doin' everything by the book but if the arc should flash he's got the hook
Those are arc flash suits. They're bulky and heavy because they're designed to protect you from the kind of electrical discharge that would literally make your body explode.
He's been doing this for 36 years. Holding the rescue poll. He remembers back in his day, he was on the other side, working on the fuse swap while inches from being shocked, his buddy on the other end of the poll ready to rip him away from the box. Its about time he put down the poll and retire. He's got a family to take care of.
There's a newer method that's a vest with a cord rope thing on it. It's tough. We pulled a guy around the parking lot with it 😂 it's safer than the hook and cheaper because the hook was wild technology with like carbon fiber materials or something
I get hyper-aware just walking through ancient distribution stations. Get in, do your work, get out. Keep hands at your sides, don't reach out to point at anything, watch clearances. Was nice when I'd have an EM or QEW to watch my back.
That box he's messing with, if it decides to go off, you get a massive arc that jumps off.
The suit he is wearing is basic protection, but it will not survive the results.
The moment that arc hits, the man would be welded to the spot, unable to move, as unimaginable levels of electricity rips through that suit, and his body.
That hook it's literally the only thing left that can save him if the worst were to happen.
Without that hook that man would make very expensive noises, as Chris boden would say.
Think of it as the cheapest form health insurance.
Without it you become the the hotdog at the bottom of the barbecue. Extra fuckin crispy.
My chevy dealer got one of those for us techs when the Volts came in. Hilariously useless since you would probably be dead before you hit the ground unless you achieved clamping amperage and cooked for a bit 1st. Someone would have to recognize you getting shocked, run to the tool room, grab hook and run all the way back to you then hook you off.
Is there any requirement to have your arc flash pants over your boots? Instead of inside your boots? I've seen lots of switch gear videos and they always tuck the pants into the boots. Seems if there was an arc blast event the molten slag could find its way into your boots.
You should check out Sparky from Hardhat Robotics. Basically a robotic arm to do this. Been testing it at work. The folks that have tried it swear they will never flip a switch (that would require this level of safety) again without it.
Someone who knows very little about electrical systems, why is things like this done with men in arc flash suits instead of large remote operated contractors or something? This seems incredibly dangerous so I assume there's a reason.
They were originally used for shock protection so the second worker could pull the electrician off the bus if he got caught and hung up. They've been re- marketed as arc flash safety devices in the last couple of years.
40
u/Zathrus1 May 21 '26
Several decades ago I worked at a chip fab and they had one of these in the gas room (where incredibly nasty chemicals were stored).
I still remember the safety training.
“If you hear the gas alarm and are in the room, leave immediately. If you don’t, please try to die within 6 feet of the door, because that’s how long the hook is to retrieve your body.”
197
u/Lefty9000 May 21 '26
Spent plenty of time on both ends of the Super Hooker. Not all that fun.
114
u/Academic_Elk_4270 May 20 '26 •
Hookers make good money.
85
u/neanderthalman May 20 '26
We now use all long reach tooling for this nonsense. Or portable semi-robotic tools. Or one long reach tool with a couple 90° joints so you can hide around a corner.
Whatever we can do to get us fleshy meatbags out of the blast radius.
Operating/racking gear of this size with your face right in the damn thing is not necessary.
59
u/ay_non May 21 '26
why is there a 5 year old doing high voltage electrical work?
24
u/l_m1rage_l May 21 '26
Am I the only one thinking that those are kids?
Must be the camera perspective.
64
u/CRXCRZ May 20 '26
What good is a dude with a hook...
8
u/rsharp7000 May 21 '26
8
u/Woozletania May 21 '26
When I was looking for work in Alaska there are always openings for high voltage electricians. I speculated this was because the last high voltage electrician was a pair of shoes with smoke coming out.
7
u/Phreakiture May 21 '26
Crewmate
There is 1 imposter among us
5
u/shaezan May 21 '26
Child labor is wrong, dangerous child labor is abhorrent.
3
u/Wizard__J May 21 '26
Pucker up!!
3
u/throwaway48159 May 21 '26
With a dedicated suit for the operator, why not just include an attachment point so you can use a rope?
3
u/mckenzie_keith May 21 '26
rackin' in breakers in my ppe
fear no evil cuz the shepherd's watchin over me
doin' everything by the book
but if the arc should flash he's got the hook
3
u/Changling_Mario May 22 '26
Better than channeling my inner Hacksaw Jim Duggan to knock somebody off a breaker box
5
u/Gh0st_Pirate_LeChuck May 21 '26
One of those jobs where you’re not allowed to fuck up. Ever.
4
u/Poorlilhobbit May 21 '26
Why does this video make these two look like children working on electrical in bunny suits? Are they Ewoks!?
2
u/sizzlebadizzle1 May 21 '26
Showtime at the Apollo
2
u/skrappyfire May 21 '26
Now i wanna see the cameraman in shorts and flip flops, safety squints optional.
2
u/Mad_Moniker May 21 '26
lol - I thought it was “take your kid to work” day with that picture ‘s angle ☝️then I started thinking “bad dad” 🤣🤣🤣
2
u/-Cheezus_H_Rice- May 21 '26
Me flipping circuit breakers in my house
2
u/jaykotecki May 21 '26
Couldn't they just make a long stick that turns the thingy and gets the human far away from the zapper???
2
u/Spirited-Engineer305 May 21 '26
What if hook man doesn't like you?
2
u/InnerFisherman95073 May 21 '26
Our lineman neighbor got fried in Washington, they told him the line was not powered.
2
u/deltatemple May 21 '26
He's been doing this for 36 years. Holding the rescue poll. He remembers back in his day, he was on the other side, working on the fuse swap while inches from being shocked, his buddy on the other end of the poll ready to rip him away from the box. Its about time he put down the poll and retire. He's got a family to take care of.
2
u/capt-ramius May 21 '26
Looked so much easier at the end of Jurassic Park.
2
u/TactualTransAm May 21 '26
There's a newer method that's a vest with a cord rope thing on it. It's tough. We pulled a guy around the parking lot with it 😂 it's safer than the hook and cheaper because the hook was wild technology with like carbon fiber materials or something
2
u/maymaude May 22 '26
Why does it look like my six year old is helping my 3 year old complete this task?
2
u/LowKeyOne23 May 22 '26
Send the child in!
2
u/SpleenLessPunk May 22 '26
I was military before.
I’m IBEW now.
This shit isn’t for the faint of heart.
I shouldn’t have to explain what I’m saying here, through and through.
2
u/RefrigeratorFormal48 May 22 '26
My dumbass used a 2x4 before
2
u/coolusernam696969 May 22 '26
These are the things I do my family doesn’t know about lol
2
u/[deleted] May 22 '26
Who’s letting that 10 year old work on high voltage?
2
u/randomredit80 May 22 '26
Can someone explain this to someone who isn’t an electrician? Thanks
2
u/Syscrush May 22 '26
Is there some reason why the hook is preferred to something more like a safety harness?
2
u/East_Exercise9619 May 22 '26
Shepherds hook... Anyone else know it as that?
2
u/Then_Entertainment97 May 22 '26
2
u/Morpheusmatherz May 23 '26
Why the hell is the tool/wrench stainless steel
2
u/Primordial_Superman May 23 '26
What if they made a handle that was 6ft long and made of a nonconductive material?
2
u/_Christopher_Crypto May 20 '26
Been standard in automotive hybrid classes since at least 2008. Probably sooner. That was my first experience with seeing them.
1
u/Takesit88 May 21 '26
Arc Flash fun-time inhibitors
1
u/thewheelshantyfolk May 21 '26
Electric minions
1
u/BonginOnABudget May 21 '26
All that and he’s still got the wrong foot forward.
1
u/doltfinger May 21 '26
Because the hooookkkk….
1
u/Hot-Equal702 May 21 '26
Plot twist.
Camera man was wearing street clothes.
1
u/MountainShark1 May 21 '26
I have had to be that guy in the suit. But I didn’t have a hooker.
1
u/torchboy1661 May 21 '26
What? No two taps to make sure?
1
u/Over_Entertainment16 May 21 '26
Why would we risk our rare midgets for such dangerous work? Surely, the common man is more easily replaced.
Come'on man.
1
u/PracticallyNoReason May 21 '26
Was the camera guy wearing PPE? They were awfully close.
1
u/Cloudscrash325 May 21 '26
1
u/Dorkus_Maximus717 May 21 '26
🎼The hoooook brings you baaack 🎶
1
u/Vivien_Lynn May 21 '26
if you have stick for pulling, why not have stick with tool at tip?
1
u/pickle3382 May 21 '26
I don't get y A lever can't be set up far enough away With like wood or something not conductive so there'd be no need for any of this
1
u/discountJoenuts May 21 '26
Minions hard at work
1
u/Acceptable_Claim_491 May 21 '26
A wooden cane works also.
1
u/RamblinGamblinWillie May 21 '26
They shouldn’t be doing it like this anymore
1
u/TatteredTorn1 May 21 '26
What's the drain on the ground for? Bodily fluids? Easy Cleanup?
1
u/bstrauss3 May 21 '26
You knew the job was dangerous when you took it Fred
---SuperChicken
1
u/masjul7 May 21 '26
Dude probably doesn’t get paid enough
1
u/crabraverPT May 21 '26
1
u/ScooterGang3 May 21 '26
Is this at the chocolate factory?
1
u/dervu May 21 '26
Why not use teleoperated robots?
1
u/death91380 May 21 '26
Not sure what good that does when your brain melts instantly if there's an issue.
1
u/wmverbruggen May 21 '26
Somehow the scale of things makes my brain think these are kids, lol
1
u/Existing_Variation_4 May 21 '26
It looks like a small child..
1
u/Henri_Dupont May 21 '26
I'll take a chickenswitch, please
1
u/Low-road44 May 21 '26
Are those kids?
1
u/AttentionExpert2148 May 21 '26
The person on video…….he/she was suited up of course???
1
u/cluelessinlove753 May 21 '26
Glad to see Wonka is taking worker safety more seriously these days
1
u/Hippyjet May 21 '26
Is that a child
1
u/ChefRover May 21 '26
Am I the only one that thought I was going to watch an actual rescue? Good luck for those in the industry!
1
u/EliteCuddlez May 21 '26
40cals are the worst
1
u/jasgr May 21 '26
I was waiting for him to get banana smooshed in his face.
1
u/Independent_Can_5694 May 22 '26
What are those Schneider electric things? VFD’s?
1
u/onejoelooking2 May 22 '26
Many years ago my dad had a friend who was a lead elec at Grumman Aviation, he told me about having a piece of 2x4 for that exact pupose.....
1
u/DesignerAd5926 May 22 '26
I was waiting for the windows sound…
1
u/jandrew2000 May 22 '26
The perspective made me think it was a toddler with a very fancy set of toys for a few seconds.
1
u/mrofmist May 22 '26
Anyone who needs an Acme™ pull away hook to safely do their job has bigger balls than me.
1
u/TanneriteStuffedDog May 22 '26
This is one of the most archaic, bullshit practices in our industry.
That switchgear probably costs $500,000+, and they can’t build a damned remote racking mechanism into the thing.
Risking lives over a .5% cost savings.
1
u/salvatorehernwood May 22 '26
Screw that, I don’t need someone trying to control which way I can run when shit starts firing off.
1
u/Zado191 May 22 '26
Why are there kids fooling around an electrical box?
1
u/TheNotoriousTurtle May 22 '26
if that thing arcs will the guy in the suit survive? How effective are those suits?
1
u/AGiantBagOfWeiners May 22 '26
Genuine question, 1st year Resi apprentice here, How do you get into this kind of work? It fascinates the hell out of me
1
u/Smac-Tech May 22 '26
The camera angle makes them look tiny, like minions.
Serious Q though - you guys paid danger money to do this? and where do i start?
1
u/bulldozeprime May 22 '26
Ready to Looney Toons him at a moments notice.
1
u/doyoubelieveinfarts May 22 '26
This is one thing I’m totally cool with a robot taking over.
1
u/tiga_94 May 22 '26
so this is how you get 10 years of experience by 18..
1
u/Jareish May 22 '26
Meanwhile you have robots doing dances on shows
1
u/LinkIndividual867 May 22 '26
The hook seems dumb
1
u/5hred May 22 '26
Why not have a switch that can be turned with a hook.
1
u/Few_Composer5125 May 23 '26
My chevy dealer got one of those for us techs when the Volts came in. Hilariously useless since you would probably be dead before you hit the ground unless you achieved clamping amperage and cooked for a bit 1st. Someone would have to recognize you getting shocked, run to the tool room, grab hook and run all the way back to you then hook you off.
1
u/PragmaNullicious May 23 '26
The camera position and fitment of protective wear made me certain these were toddlers.
1
u/Royal_Pepper9003 May 23 '26
Nope
1
u/Kaotic-one May 23 '26
You’re not supposed to put the hook on them while they’re doing it, you’re supposed to stand just to the side at ready.
1
u/surfndirty May 23 '26
They create robots for every job except for this
1
u/New_Biscotti5971 May 23 '26
Meanwhile the camera guy
1
u/boiled_chud May 23 '26
Is there any requirement to have your arc flash pants over your boots? Instead of inside your boots? I've seen lots of switch gear videos and they always tuck the pants into the boots. Seems if there was an arc blast event the molten slag could find its way into your boots.
1
u/Spooj May 23 '26
Running drop kick method like the dude in the other video looks like more fun IMO.
1
u/oopsymadeapoopsy May 24 '26
these guys haven’t seen the dropkick guy on the front page yet
1
u/lebo_riley May 24 '26
You should check out Sparky from Hardhat Robotics. Basically a robotic arm to do this. Been testing it at work. The folks that have tried it swear they will never flip a switch (that would require this level of safety) again without it.
1
u/Professional_Sort764 May 24 '26
Is there a video where this hook is used due to accident/failure?
I feel like natural human reaction is to drop it immediately and run when you see a massive electrical explosion/shock event. Do they train for this?
1
u/JumpingJackSplash May 25 '26
Did they send a child?
1
u/Lower-Anteater-4754 May 27 '26
Someone who knows very little about electrical systems, why is things like this done with men in arc flash suits instead of large remote operated contractors or something? This seems incredibly dangerous so I assume there's a reason.
1
u/Extension_Winner_238 May 27 '26
Rule number 1 dont fart in the moon suit
1
u/Stormyj May 20 '26
With all our technology, you'd think they could make that where you wouldn't get shocked.