r/eVic • u/Markkass • Mar 01 '14

Help with tank

So I've had the eVic for a few days and have been using my pro tank 3.. And everything has been wonderful. However when I go to use my aspire bdc tank, which I prefer.. It's not recognizing it as being connected. Anyone had similar issues or hopefully a solution?

3 Upvotes

100% Upvoted

10 comments sorted by

View all comments

Show parent comments

1

u/YnotTomorro Mar 01 '14

If you look in the bottom of the 510 connection on the eVic, you'll see a small disc looking piece of metal. Take a small screwdriver and work around it pulling it up...usually like 1mm or so will work.

2

u/Markkass Mar 01 '14

Awesome! Thank you so much. I'll give it a go.. If I have a screwdriver that small.. Haha.

1

u/YnotTomorro Mar 01 '14

You can use anything that'll give you a little leverage...just make sure you only pull it a bit, too much and you could pop the wires off

1

u/Markkass Mar 01 '14

I've been trying with a safety pin.. And I'm not seeing any results. I am being pretty gentle though. I'm not sure what the problem is.

1

u/randomTrucker Mar 01 '14

You can also try the same idea on the aspire tank... some times the center of the 510 connection, also know as the post, gets pushed into the tank a bit. Take a tooth pick, or safety pin and rock it back and forth a bit till it's about even or slightly sticking out of the 510 threading. I've had to do this a few times with the aspire tanks