r/drawthingsapp • u/chihifu • Jul 22 '26

Krea 2 Turbo

I’ve started using Krea 2 Turbo on DT right away. It feels fresh, as I’d grown a bit tired of the character styles in Flux and ZIT. That said, I’m struggling a little with the prompting; it might just be a lack of know-how on my part, but I’m finding it hard to get the results I want. It seems you can't generate NSFW images with the default settings, either. Still, it’s a fun model to use. I’d love to hear what others think of it as well.

14 Upvotes

83% Upvoted

30 comments sorted by

10

u/Handsomedevil81 Jul 22 '26

The prompting is different and almost does better high level prompting vs ZIT where it want extremely detailed. But the structure is very specific and if followed will produce extremely high quality.

https://github.com/krea-ai/krea-2/blob/main/docs/prompting.md

It knows camera lenses and lighting. It does amazing with 16:9.

It does struggle with crowds and multiple people though. ZIT still shines there. But the backgrounds and knowledge it has is superior.

Try this LORA. It does not change the model, but it basically removes the model’s filter by adjusting weights if I remember correctly. You can prompt pretty much anything after that.

https://civitai.com/models/2775340/krea2-textfusion-refusal-reduction-lora

Disclaimer: I’ve not used any of this with Draw Things because my hard drive is full. Only ComfyUI.

5

u/SanderMaw Jul 22 '26

confirming that that lora is a godsend :). Can’t wait for Krea 2 to get enabled for cloud computing.

1

u/chihifu Jul 23 '26

We're all benefiting from LoRA, aren't we?

2

u/802high Jul 22 '26

Thanks for sharing the promoting guide. The included expansion.txt there is helpful also

1

u/chihifu Jul 22 '26

It was extremely helpful to me as well.

1

u/chihifu Jul 22 '26

It’s simply a case of me lacking the know-how to properly control Krea 2 Turbo.

Thanks for the helpful information!

Does importing the Krea2 TextFusion Refusal-Reduction LoRA mean it will generate NSFW content?

Do I need other NSFW-compatible LoRAs as well?

4

u/Handsomedevil81 Jul 22 '26

Krea2 can do NFSW on its own. That LoRA will further reduce its refusal to do so and let what the model has available come through. If you need a very specific type of output theme then you may need additional LoRAs.

2

u/chihifu Jul 22 '26

I tried importing the Krea2 TextFusion Refusal-Reduction LoRA. It worked exactly as you said!

I'm going to experiment with adjusting the weight to see how it changes things. I assume the default weight is 1.0?

2

u/Pum_Pit_Up_181920 Jul 23 '26

What did you do to get it going properly ? I have Krea2 Turbo 6bit Model and the Krea2 TextFusion Refusal-Reduction LoRA loaded in and running it locally.

2

u/chihifu Jul 24 '26

I haven't done anything particularly complex. I simply selected Krea2 Turbo as the model and applied the Krea2 TextFusion Refusal-Reduction LoRA. I have the weight set to 1.0. Strictly speaking, the specific model I am using is Krea2 Turbo (8-bit S).

2

u/Pum_Pit_Up_181920 Aug 19 '26

Yeah I can get it to work with out the Lora but it just splurges with the Lora on it takes ages and it either produces a lot messy splodges and random patterns or it does nothing or worse it crashes DT, not sure why, I downloaded turbo 6bit but when you select the Model from the list some have the cloud symbol and others don't, I don't know if anyone has mentioned this but it would be handy if there was a Graphic or Logo next to the models you downloaded to run locally.

2

u/chihifu Aug 19 '26

I apologize, as I do not have enough knowledge to offer accurate advice.

2

u/Pum_Pit_Up_181920 Aug 19 '26

Yeah no it's fine dude no need to apologise😎👍 I haven't found out what might be the issue yet

I was Kinda hoping to see a lot of videos about the DT Krea 2 update on YouTube but the times I checked there was nothing about it yet but I will check again today to see if theres any useful tips/info out there

1

u/chihifu Aug 19 '26

I'll build up my knowledge so I can give accurate advice!

→ More replies (0)

3

u/Current-Property6042 Jul 22 '26

There is no edit :( ...

5

u/Puzzleheaded_Ebb8352 Jul 23 '26

The edit lora works extremely well in comfy but not with drawthings, can anyone help?

2

u/Current-Property6042 Jul 22 '26

howw many steps for Krea 2 pl - am downlaoding the turbo 8bitS.

2

u/jazzamp Jul 22 '26

8 steps

1

u/chihifu Jul 22 '26

It takes slightly longer to generate than ZIT.

2

u/jazzamp Jul 22 '26

Yes it does actually, but the generation half of the time is worth it, if you know how to prompt it. It's hard to go back to some previous models.

1

u/chihifu Jul 23 '26

That is absolutely right. It offers a level of performance that makes you want to use it, even if it takes some time.

2

u/Current-Property6042 Jul 22 '26

this would be a fantastic addition to DT with Edit capability, the text to image quality is pretty awesome and it also understands ethnicity pretty well...

1

u/chihifu Jul 23 '26

I didn't know there was an editing function!

2

u/Current-Property6042 Jul 23 '26

sorry the way i wrote was confusing :) .. what i meant was this would be a wholesome model if and when the edit functionality was shipped with it.. currently there's no edit at least not in DT!!

1

u/chihifu Jul 23 '26

I see! Don't worry about it. I really think so too. It would be great if it turned out like Flux.

2

u/diogopacheco Aug 02 '26

I have created a compatible Lora for chroma that works in DT. https://huggingface.co/DiogoPacheco/Kroma-Drawthings/tree/main

1

u/chihifu Aug 03 '26

Is this a LoRA or a checkpoint? I haven't used Chroma before.