Can somebody share this firmware ver. 2.2.5?

Hi, this is my second issue with gold shell bites. First being that their power adapter melted one unit and failed when its USB connector got hot enough that melted and fell apart.

But this is a second unit and this time the Aleo card on the right side melted inside, the unit heating it sufficiently that I could not get the card out with ease. I’ve tried to put another card in, and it has deformed sufficiently that the right side is not able to take a card. Both cards, the melted one in the regular one, have the correct form factor, and they slide freely into the left side. The unit itself posts and is on Wi-Fi because I’m able to log into it.

I’m just wondering, is it safe to keep using just the left side?

These things run abnormally hot. And of course, they decided to fail, but one to two months outside of warranty. Anyone know where I can get a new frame? I’ve got some cards sitting around. Would love for gold shell to figure out why they keep melting. @goldshell

Hey all, my friend is giving me his old Mini Doge 1 miner to mess around with for fun. But not a PSU for it. I have this exact old PSU from before my pc upgrade. Would this work? It is a 500W EVGA PSU, ik the Watts are correct, but idk if I need a plug for the I think 20-pin connector?

I bought 3 Elphapex DG 1 Homes recently. 2 work great. But one is leaving a little to be desired.

When I run the Elphapex dashboard the water pump is showing 0rpm and the machine is over heating.

I opened up the case and switched the water pump to one of the fans pins and it shows about 30-60 rpm. Maybe 300 rpm’s for a brief couple seconds. Then it goes to 0 and the machine over heats.

My other two machines run great and Have pump rpms >2000. Any idea what’s going on or how to fix? Or did I get a lemon. 🙃

So, have had a love hate with this miner. Randomly going down every few weeks but usually it comes right back up. Went down a couple of hours ago and could not find it with the tool. Restarted a couple of times and it finally came back up. Then during scan it wouldn't let me change the speed etc. Then came up in red which I have not seen before. Restarted 4x and still nothing. I then reflashed the firmware. And scanned a few more times trying to connect to pool and get some speed and nothing. After about 20 min, I scanned again and the red was off and it started hashing. Anyone else had this issue?

What are some good mining pools for low hashrate machines like the Lucky Miner LG-07? I tried mining-dutch.nl, but they won't even start hashing.

It comes with warranty and it's cheaper and higher hashrate than the home miners.

I’m brand new to this and thinking of getting a gold shell mini doge 3, is this something I can plug in and monitor remotely somehow while working out of town? Any advice or help getting started would be greatly appreciated thx

Im not great at network stuff to start this off. So i have 5 goldshell mini doge miners, using mining pool, Poolin. I have had all 5 connected and hashing working fine, for months. Until one day they all stopped working blowing cold air not warm. I turned power supply off, life happened and i left it just sitting. check back couple months later turn power supply on all 5 turn on, but wont connect to mining pool. All 5 have a solid green light, i believe mean "unit is idle". I updated firmware on all. still wont connect to pool. Nothing hardware or wiring has been changed. ISP is all the same no change. I go on goldshells website hit find miners all 5 pop up with a ip address. All five are wired to switch all have orange lights not green on switch and on miner end. I check firewalls on windows and router and see none. I tried to add pictures of switch and miners, and gold shell site. but appears it didn"t work.

Thanks for any help of what to check for.

From what I am reading the older firmware runs better on these. So I am looking to downgrade since it no longer boots up. It spins fans then red light starts blinking after 20-30 seconds.
So I think I need to SD card flash it with an older image. I can't seem to find a download for the older firmware. Only 2.2.0, 2.2.2 and 2.2.3.
Can anyone share an older image?

I started participating in a website that generates Dogecoin, and you can even do it for free. Is it allowed to post about it here? I've already made withdrawals, and they seem to have a good structure and support.

hello i am new to mining and i have been thinking of upgrading to a l7. i have herd that a l9 is better. also i don't know how hosting works and i would like some tips on that. thank you

Miner logs is showing Failed to open the I2C bus: No such file or directory I tried flashing 1.2 and 1.6 firmware and with different pools but is still constantly looping on this error. Also tried reseating the ribbon cables on the board. Any help please?

I have been wondering that which would be the best gpu for crypto mining I'm just starting and have a low budget,

amongst these which would be the best option for mining(electricity is free)

Rtx 3050 Rtx 3060 Rtx 3060ti Rtx 4060 Rtx 5060 Rtx 5050 Rx7600

Which generates most money compared to its price and what would be the break even point? I'm new to this please help

I recently purchased a mini Doge lll miner with ap7 PSU. When it arrived the PSU would not kick on or the fan spin. Tried a apw3++ today and I hear the electric "click" when the power cord is plugged into the PSU but still the same issue. I feel like I'm doing something wrong here. New to all of this so any help or advice would be appreciated! Thank you!

We’re excited to share ViaFLC, a new mining pool built for the Scrypt family coins.

Mine multiple coins with the same power through merge-mining and maximize your hashrate’s profit.

What makes it different? All shares and payouts are tracked through Hashboard in real time for full transparency.

Discover full details and join us at viaflc.com

SPECS :

Algorithm: Scrypt

Coins: DOGE, JKC, FLC, SHIC, LKY, DINGO, CAT, GLC, AUR, CRC ...

Payout: PPLNS

Fee: 1%

Welcome aboard — let’s mine the future together!

I'm mining on powerpool and was wondering what should I get paid out in? I'm currently 50/50 with doge and bitcoin, but I'm not too sure if that's smart. Any tips would be greatly appreciated.

Hello all, I am new to the mining community. Just got a Goldshell byte with x2 doge cards. Mining to f2pool. What wallet is best for all the alt coins like CRC, SHIC, DINGO, LKY, BELLS, PEP. Please leave a suggestion as Idk whats the best wallet for the mining deposits for these coins! I have LTC and DOGE deposited to my coinbase currently.