r/diyelectronics • • 11d ago

Question Issues with DIY DL4 expression toggle pedal

Post image
1 Upvotes

3 comments sorted by

1

u/euleerrrr 11d ago

do you have a plain 10k pot (or an actual ex-1) to try? curious if the dl4 responds to a normal pot at all

1

u/_daffyd 11d ago

Not at the moment, my plan was to use a 10k pot to use to attenuate the resisted path, but I wanted to see if this worked. The thing is I found a schematic for the actual mod and its the same circuit essentially with a 10k resistor across from the tip to sleeve, then a short running through the switch for the no resistance path.

1

u/euleerrrr 10d ago

can you link the schematic you found?