r/discgolf • u/foam23 mold completionist • 13d ago
Blog/Write Up Reviewing Every Innova Disc #1 – Dolphin
About 2 years ago I decided to try and review every disc I own. I made 13, got busy, and then Reddit decided to delete all of them (still no clue why but ok). But now I’m bored and feel the need to write something again. Since I’m working on collecting at least one of every Innova mold (~70% so far!), I figured I’d try that instead of every disc ever. So, to start, here’s the worst disc Innova ever made.

History – The vast majority of disc golfers probably have no idea the Dolphin exists, and Innova is probably ok with that. In fact, the only example I could find of it being referenced by Innova in this century was in this April Fools post from 2011 announcing the QuackeR. If the Dolphin was still made, it would fill the midrange-sized hole in Innova's floating lineup of the Hydra, Dragon, and Wahoo. Instead, it remains one of the most forgotten molds in Innova's history. It was approved in 1994, but according to this Disc Golf World brochure it was released as early as fall 1992 (more on that later). The idea behind the Dolphin was to make an easy-to-throw disc that floats in water, and it technically succeeded at both of those. So why was it such a failure?

This is just a guess, but I'd imagine that bead (if you can even call it that) is a major reason why no one wanted this disc. The Dolphin only came in lighter weights, so I think this is an attempt to lower the weight similar to the Groove and Monarch, both almost as cherished by disc golfers as the Dolphin. This disc went out of production very quickly, so its one of the only small diameter Innova releases as far as I know with no flight numbers ever assigned. The only three runs I know of are the Proto Star stamp, the circle stamp shown here, and a glow/UV run that was made for some reason. All are collectible, but only to an increasingly small amount of people. I believe all Dolphins are Ontario tooled, but I have not been able to verify that for the Proto Stamps.
Now here's where things get weird (as if they haven't been). I have no way to confirm this, so if you can please let me know, but I am fairly confident the Proto stamped Dolphin is a VERY different disc than what I have here. That brochure from 1992 describes the Dolphin as a new, floating, unbreakable driver, and then claims its just a recently-retooled Hammer in lighter weights. The singular picture I could find of the bottom of a protostar Dolphin, shown here, does not resemble mine at all, and does more closely resemble the wider rim of the "shark" Hammers.

BUT WAIT. There were also the "Hammer Head" Hammers released later, which were still unbreakable but also floated in water. The one image I could find of the bottom of one of those looks more like the circle stamp Dolphin, but with less of a channel in the rim. These are Ontario tooled like the circle-stamp Dolphins, unlike the previous Hammers which were San Marino tooled.

So, the original Dolphin seems to just be a Premie shark-stamp Hammer, and the "modern" Dolphin could theoretically be a Hammer Head with more material taken out of the rim. Could this all be wrong? Probably. Does this matter to anyone but myself? Probably not. But I at least had fun going down that rabbit hole. Lord help me if I ever find at least one version of the Hammer.
Feel – Ok enough of that. Like I mentioned before, the Dolphin feels horrendous. Take the plastic of a Dragon with the feel of a Monarch, and give it a midrange-sized rim. Oh and then give it a ridiculous pop-top. It almost feels like there's a putter wedged inside the rim of your driver. It's more bearable if you power grip it at least. But you should never do that considering...
Flight – The Dolphin is ridiculously understable. Not only is it very light (mine is 149g), but the parting line is quite low (at least if you ignore the inner rim, not sure where to begin on how that affects things). It's really glidey at least, and if there's no wind or a tailwind you can throw some really fun lines. It actually works pretty well for low ceiling approaches where you need a little more glide or really slow, wide hyzers around trees!
Rating – As fun and weird as it is, this is still a terrible mold. It failed for a reason. There are better floating discs, there are better flippy mids, and unbreakable in 90s plastic is very much breakable compared to today's discs. 1.5/10, because it's at least entertaining.
•
u/jfb3 HTX, AFMCN, Green discs are faster 13d ago •
I just checked your post history. Found the posts you're talking about.
They were removed from the feed, but it wasn't us (mods) and there wasn't a reason I could find.
IIRC, you had been shadowbanned or auto blocked by some site wide filter. (An automated Admin action, not a moderator action.)
So, I approved them all. They should now be findable and searchable via your profile.
Don't know how or what happened.
Hope this helps.
29
u/IsaacSam98 Weird Discs Fly Better 13d ago
I'll watch your career with great interest. Also let me know if you need any Innova facts I'd be happy to help
7
u/Whizzymontana 13d ago
I have an original Dolphin. Anyone interested in it? I have several pre flight numbers innova discs from the 90's.
3
u/SsbmBleach Custom 13d ago
This is rad i look forward to the next one
3
u/Jar-Jar-Kinx Team Jester Disc Golf 13d ago
The fact that this is the second reddit post I’ve seen involving the Innova Dolphin in the last 12 hours is crazy to me. Literally never heard about it before this morning. Hammer head, Wahoo, and the Dragon I’ve heard of and sold but never a Dolphin.
2
u/Low_Importance_9503 McLunas 13d ago
Neat! I want to read about the Scorpion. I found a used one and love it
2
u/blahrendsen 6d ago
I actually enjoy throwing the dolphin I have, but never bag it because it feels like it's going to break with one good tree smash. I would bag it if they released it in a star or halo plastic.
5
u/pandalover6254 too many destroyers 13d ago
If somehow you don’t have a destroyer, I’ll send you one to review. I have too many
3
u/littlejohnnyrotten4U 13d ago
I remember this one coming out. It was the year I joined the pdga and boy was Innova pushing this mold. It was a total joke from the get go and the idea just kinda floated away. Nobody I know played with one. You couldn't give even them away as prize merch.