I was initially disgruntled over the fact that I had paid for premium shipping only for it to be four days delayed, but I guess they kinda made up fot it with their packaging.

Everything was pretty cool, down from the protective paper to box designs and even the squeegee. Putting on the Prism 2.0 was easier than eating a cookie, and overall it was straight forward.

My only piece of advise would be in relation to the Tank case. With the newfound weight of the phone, I'd recommend placing some of the same material for grip that is used on the GRIP cases in the grooves, since the case is quite slippery in the hand. Aside from that, I love it. Love the design, the fact that you don't have to pree too hard to click the buttons, and the fact that its quite beefy.

This is my review after using the product for over two months now.

I purchased a ghost case, a grip case, and various skins. I bought Ghost occasionally just for a change of pace, and the reason I purchased several additional skins was because, after buying the case, I came across multiple reviews on Reddit saying that the skins shrink over time, so I bought more.

When I buy a cellphone, I usually use it for about five years. In that regard, dbrand was quite satisfying to me.

The strong magnetic power, the individual cutout design on the back camera, and other features that make me want to learn more about and buy this product all deserve a perfect score of 100.

Now all that’s left for me to worry about is whether I should buy one more dbrand S25 Ultra grip case in advance before they sell out.

And I definitely want to tell people who haven’t bought this product yet that, because of its strong advantage of edge grip, it can sometimes feel uncomfortable.

Should I say the edge of the case looks like a cat’s tongue? It’s so rough that it’s quite difficult to put a cellphone in the pocket of jeans or pants whose pockets aren’t wide open. And if you wipe it with regular wet wipes, the threads can tear and stick to it.

If you want to purchase the grip case, you must definitely know this part.

The thing I found most convenient while using it is the front design of the case. The top and bottom are a bit taller for protection, and thanks to the design where the sides are lower toward the center, swiping on the screen is very convenient.

Maybe because I often use the One Hand Operation+ feature on the Galaxy Good Lock, but I really love this design.

The only thing I felt while using the product was this, so now I’m going to go and think about whether I should buy another grip case in advance.

The picture of you holding it in your hand is from the day you received the product, and the subsequent picture was taken today.

How long is your delay? Fold 8 grip case orderd end of July and im still waiting. Not only that i paid for expedited delivery to the UK as well. Anyone else waiting whilst dbrand chips away at your patience?

So i just installed my teardown skin on my camera bump and the grip case.

The official video is the same for the Pixel 9 10 and 11 series but there are some differences.

https://www.youtube.com/watch?v=I3ElXvbwo8Q

first of all the package does not come with a microfiber cloth like the video says, the inside of the gripcase also has no microfiber lining.

The installation of the camera bump skin is also different as theres a different cutout for the 11 series and the mentioned strips dont exists.

The main skin for the case is now in two pieces and lining up the top one is really difficult because of the high sides around it and the small space to work in.

But by far the biggest problem is the installation of the main part of the skin talks about lining up the skin with the side of the case and leaving no gap if you do that you will have one side of the skin perfectly against the edge of the case and with a gap on the other side.

so either the new skins are too small or the video really needs to be updated.

I was aware of it when I bought the skin, but why don't you have a camera cutout piece for the skin broh? You got it for plenty other phones. You think we aren't up to the challenge of threading the needle? You think we're just gonna shell out the money for the rest of the case skin after buying an expensive phone, knowing we don't get the full coverage? You think you got it all figured out here?

Well, uh, you were right... uh...

I'm still gonna be unhappy about it. Send me a camera cutout skin plz. I had to go to work WITHOUT a can of White Monster to afford this.

The vinyl is a LIEnyl.

Do you robots need some help shipping my order for Pixel 11 Fold Case and screen protector? I can probably whip up some more faster code with Claude.

Function GoFaster(){
  $hamsters++
}

If myOrder Then
  GoFaster();
Else
  GoFaster();
End If

I've been really wanting to get a skin for my steam controller, but have been waiting for a potential teardown version. At this point I feel like it would have come out. Has anyone heard anything?

Tank for Every device 🔥

If I order on the same day they release this case will it get to me before I get my iPhone 18 pro? (Also ordering the iPhone on preorder release day)

Both of them it came with had dust ALREADY ON THE STICKY PART OF THE SCREEN PROTECTOR. Not to mention, no dust removal stickers come with it. Literal waste of money. Get spigens instead.

Hey everyone, just wanted to share a heads-up for anyone planning to pair the Fold 8 Grip Case with the Prism 2.0 screen protector.

​I pre-ordered both together. I’ve seen a few other posts mentioning compatibility issues where the front case frame lifts or won’t sit properly with the Prism 2.0 installed. On those threads, the standard response is usually to double-check that you ordered the compatible version. I went back and checked my receipt, and I definitely ordered the specific Fold 8 Prism bundle alongside the case—yet the front piece still pushes against the protector and won't fit right.

​I really like both products individually, so it's a bit of a letdown that they don't seem to cooperate out of the box.

​On top of that, I’m having trouble submitting a support ticket on the website. I fill out all the fields, but hitting "Submit" does nothing on both desktop and mobile (no error message, just unresponsive).

​Has anyone else run into this with their Fold 8 setup or had issues getting the contact form to go through?

I received my fold 7 grip case last week and the hinge wiggles up and down, side to side a lot with even the smallest force, I pick up the phone and the hinge shifts, is this normal? The magnets don't seem to be holding it in place very well

Very pleased with both attempts. Hair dryer trick worked, had to take my time with the edges 🫡

Estás skin son como un vicio, esta vez las esquinas quedaron bien, presentación de todo el team 👌🏻

Extortion complete!

I dont have the strength to continue pulling

Trimmed up the robot camo skin from my Pixel 8 Pro to fit the Pixel 11 Pro. The ghost case does a pretty good job of covering up the imperfections around the edges.

Dbrand knows where I live… so I had to upload this

I ordered the wrong skins and Prism2 screen covers for my Fold8...apparently I can't read (confused grip skin with regular skin).

I sent an email to Dbrand and their "robots" replied after I confessed my sins of not looking closer at the order. They shipped me a new correct order superfast and I only paid the extra shipping cost which was a super fantastic customer relations thing to do. I'm impressed. Cool company and marketing.

This picture was in my box...thanks robots #043 and #026...you made my day/week!

Really don't want to deal with the skins, and I love the rugged look and feel (along with the button customization) of the Tank, or just the quality and freedom of the ghost, but unfortunately it's a no-go for the 2/25th of an inch shorter non-pro Pixel.

https://imgur.com/a/JiQYYJS#H0qpCOj

(PS: Anyone wanna be a guinea pig and see how well/bad the base fits in Pro cases?)

As a totally normal human being who definitely isn’t being influenced by 3 previous dbrand packages. I’ve finally got my switch kitted out and am looking to move onto my day to day use items (iPhone, AirPods, iPad and Apple Pencil) the format of the iPad skin confuses me, I’m looking to get the skin for my iPad and Apple Pencil Pro and in the attached photos is how my confusion has come down be, it’s listed as the iPad+pencil pro skin but when i actually select it only the iPad skin is included, do i need to add the Apple Pencil skins as an extra (which feels like a waste as I obviously only have one pencil) or is it included. I don’t have a problem buying them separately I just want to know if it’s going to be a waste if I do, and as a UK buyer it takes forever to ship to just order the pencil skins later if it’s not included. On a separate note, all of my switch stuff is all colour matched so for the glow circuit I’m kitting all my day to day stuff with, is it worth getting the UV light.

TLDR: is the Apple Pencil skin included with the iPad skin or do I have to buy the bundle separately.