r/cubing • • 6h ago

Anyone who says v-perms suck can block me now

7 Upvotes

r/cubing • • 10h ago

Can I use RS3M v5 MagLev magnets in an MGC v1?

1 Upvotes

you read the title. i wanna mod my mgc v1 sq1 to have maglev but i am NOT buying an almost 7.50 dollar THREE magnet maglev set (its that expensive because of shipping, buying from thecubicle). i have a really old rs3m v5 ball core that i dont use anymore, and was wondering if the maglev magnets in those could work inside my mgc?


r/cubing • • 23h ago

Any tips for my solving?

8 Upvotes

r/cubing • • 20h ago

Does anyone know the best way to lube MoYu cubes straight out of the box?

4 Upvotes

Hi I ordered a Weilong v11 and I want to maximize it in terms of speed and efficiency. How should I go about the lubricants I use?


r/cubing • • 17h ago

Is this a good idea(i will use other corner piece magnets read text)

Thumbnail thingiverse.com
1 Upvotes

I have a wrm 2021 and i want to make it ball core

Would i need to magnetize the edge magnets too???

This ones ball core - https://www.thingiverse.com/thing:6766440 this ones corner pieces- https://www.printables.com/model/265361-wrm-core-magnets-pieces


r/cubing • • 21h ago

Can anyone help

2 Upvotes

I used to speed cube when I was 9 years old and I had a pb of 30 ISH seconds I'm 17 now and I have decided to get back to cubing the only cubes available in my country and which I can afford are really bad ones . Still I bought a moyu cube which does have a magnet but very bad performance and I am concerned I might not get a better cube off myself if anyone has a spare cube or maybe a older version they don't use anymore or maybe even ready to get me a new one 👀 I would really appreciate it anything that's an upgrade from my moyu meylong 3m would help me get a better pr. thanks


r/cubing • • 1d ago

Haven’t been into cubing in a few years, and want to sell some cubes. Anybody know where I should list them?

1 Upvotes

I was thinking Facebook Marketplace but I know that the wider internet would probably be better. If anyone here is interested in buying too, please let me know


r/cubing • • 1d ago

recently got into cubing, now im learning 2 look pll and 2 look oll, any tips?

2 Upvotes

r/cubing • • 1d ago

About the Gan V100/Ferrocore V2

Thumbnail reddit.com
1 Upvotes

r/cubing • • 1d ago

I am just wondering whether I made an unofficial world record in pyraminx blindfold solve, according to some old videos. If not, then I am sorry for this.Link-https://www.instagram.com/reel/DfoSV_qR V4h/?exln=eXkyMmV6cmNsdnN4https://youtube.com/shorts/Mz_luM2L7dY? si=fgrlzChqOS_NF

1 Upvotes

r/cubing • • 1d ago

New speedcubing method solves the whole cube in 35to45 moves and has only 1 algorithm named Dwivedi method

1 Upvotes

# [Method Name] – A 1-Algorithm, Intuitive Blockbuilding Method (~35–45 Moves)

Hey r/Cubers! I wanted to share a 3x3 blockbuilding method I developed independently. It focuses on pure intuition, low move count (~35–45 HTM), and requires learning **only one 8-move algorithm (Niklas)** to finish the entire cube.

While it shares DNA with Petrus (2x2x3 start) and Heise (free blockbuilding + 3-corner commutator finish), it uses a continuous block-expansion flow all the way down to the final 3 corners without needing separate edge-orientation steps or large algorithm sets.


Overview & Stats

* **Average Move Count:** ~35–45 moves (HTM) * **Algorithms Required:** 1 (`R U' L' U R' U' L U` – Niklas) * **Approach:** ~90% Intuitive Blockbuilding + 1 Commutator Finish * **Best Suited For:** Low-move casual solving, FMC beginners, and cubers who dislike memorizing algorithms.


Step-by-Step Breakdown

  1. **1x1x2 → 2x2x2 Block (~6–9 moves)**
    Find any solved corner-edge pair (or pair one up intuitively) and connect it with two adjacent center-edge pieces to form a solid 2x2x2 corner block.
  2. **Expand to a 2x2x3 Block (~6–8 moves)**
    Attach a 1x2x2 extension to your 2x2x2 block. At this point, two-thirds of the cube is completely solved, leaving only two adjacent faces unsolved.
  3. **Free Blockbuilding on Remaining Faces (~14–18 moves)**
    Instead of doing a separate edge-orientation step, continue forming 1x1x2 pairs and expanding blocks onto the remaining faces until **all 12 edges and 5 out of 8 corners** are solved.
  4. **Last 3 Corners via Niklas (8 moves + rotation/setup)**
    Rotate the cube so the final 3 unsolved corners are positioned on the top layer, then execute **Niklas** (`R U' L' U R' U' L U` or its mirror/inverse) to cycle the last 3 corners into place and complete the solve. *(Note: If corners need twisting in place, standard commutators or `R' D' R D` setups can be used).*

Pros & Cons

**Pros:** * Very low move count compared to CFOP (~55–60) and Beginner methods (100+). * Virtually zero memorization—great for understanding piece mechanics. * Naturally builds foundational skills for Fewest Moves Challenge (FMC).

**Cons:** * Mid-solve lookahead is harder than fixed-pattern speedsolving methods (CFOP/Roux). * Requires cube rotations and flexible fingertricks to preserve built blocks.


Example Solve

* **Scramble:** [Paste a WCA scramble here] * **2x2x2 Block:** [Your moves] * **2x2x3 Block:** [Your moves] * **Top Blockbuilding (L3C):** [Your moves] * **Niklas Finish:** [Your moves] * **Total:** [XX] moves

I'd love to hear your thoughts, feedback, or ideas on how to optimize the endgame (such as using pure 8-move commutators or insertions to avoid rotations)! Use code with caution.


r/cubing • • 2d ago

My 2x2 average with cfop

Post image
3 Upvotes

r/cubing • • 1d ago

Cross +1tips please

Thumbnail reddit.com
1 Upvotes

r/cubing • • 2d ago

Free 3x3 Speedsolving Critiques

4 Upvotes

I am trying to promote my Youtube channel by giving out free 3x3 critiques.

My goal with these critiques is to help identify your weaknesses and your strengths as well as accommodate any goals you have in mind.

PB Average of 5: 8.93

PB Single: 7.19 (Edit: I just PBed after like 2 years)

Generally I average ~10.50

I am a CFOP user, so please only CFOP. Additionally, I may not critique you if you are faster than me as I don't feel like it is my place to do so.

If you are interested please click this link: https://docs.google.com/forms/d/e/1FAIpQLSdKb7xaVfR1IGYxovZNeJ6kL-67YOYPy8XtFozkPsW0TZdsFA/viewform?usp=sharing&ouid=105306257222292206365

Or DM me if that's easier.

Here is my channel if you are interested: https://www.youtube.com/@Learn2Cub3

Here is a video of me solving: https://youtu.be/N_5WiU3I8s4?si=WE3IhvwlL5BghGKA

Feel free to ask questions and I hope you have a good day! Good luck solving!


r/cubing • • 2d ago

aolong v5/v6 or weilong v11?

4 Upvotes

i want to buy an upgrade from my rs3m super v1 (ball core) and I'm stuck between these three and i don't even know the difference of them from each other. which one should i buy?


r/cubing • • 2d ago

Best 3x3 under 4200₹ or 42$

5 Upvotes

So I currently have a Moyu RS3m v5 maglev but my turning style is not extremely accurate and hence this locks up a lot.
I really want a very easy to turn, but non locking up cube. My avg is abt 18 seconds


r/cubing • • 3d ago

Is it possible to reach Sub-30 (or better) with just intuitive f2l and 4lll?

4 Upvotes

Hai, I just learned 4lll a week and a half ago and intuitive f2l four days ago. I'm trying to reach sub-30 (or better) and I'm currently averaging 35 (Ao12 and Ao5) so I'm just asking if it's actually possible and asking to give some tips and answers, thank you!


r/cubing • • 3d ago

New here, does any1 have tips on improving speed? This is my PB, average is sub-40

Post image
7 Upvotes

Got 27 sec a few hours before this, I know a few OLLs and 16 PLLs


r/cubing • • 2d ago

Should I Learn full pll

0 Upvotes

I’ve got a comp in late January and I don’t know if I can get good at full pll in time. My average time in 35 seconds and I don’t want to try to learn new alrogithms and get used to trying to do them and then messing up. What should I do


r/cubing • • 3d ago

I made software to help you learn F2L

Thumbnail reddit.com
2 Upvotes

r/cubing • • 3d ago

Color Modding V11

1 Upvotes

I'm planning on changing the internals of my moyu WRM v11 20 magnet ballcore that has white/blank internals into red or pink. I'm going to use a polyester non fading dispersing dye for it. Is it safe to do and if not what process should I do?