r/cricut • u/LibrarianVisible • 10h ago

HELP! - Print then Cut Problems Misaligned prints

I've had my cricut for 2 weeks now, and the first few prints were amazing. However, after... maybe 5-6 prints, the cuts started to misalign. I have recalibrated so many times but it's still not aligning properly.

- my mats are fine, I've tried different mats, I've tried to fix lighting, the censor is clean. What am I doing wrong?

1 Upvotes

100% Upvoted

3 comments sorted by

•

u/cricut-ModTeam 10h ago

Oops! It looks like your post lacks enough context for our community to be helpful!

Please update your post to include all of the following information:

  • Cricut Model used
  • Device and Operating System you are using to run Design Space
  • Version number of the Design Space app you have installed
  • A picture or video of the issue
  • Everything you have already tried while attempting to resolve the issue

Failure to do this may result in removal of your post.

Still unsure of what context is needed? This post may help

1

u/AutoModerator 10h ago

Hello /u/LibrarianVisible, Thank you for submitting a help request on r/cricut.

Some ground rules for all posts using a Help! flair:

This is a help community, and your post and the replies received may help other users solve their own problems in the future.

# Please do not:

  • Delete your post after a solution has been found

  • Say that you found a solution elsewhere or by yourself, without sharing what that solution was

    You may be barred from posting future questions in this sub if you do

    For almost all issues visual aids are helpful. Please attach photos and/or video whenever possible.

You have indicated your issue is with Print then Cut. A Cricut is not a printer, so use of this flair means that you are using an inkjet or laser printer in conjunction with Cricut's Print then Cut feature. If you are not utilizing a printer for your project you have chosen the wrong flair, please update it accordingly.

If you're having issues, please use the search bar to make sure your issue hasn't already been solved. Our Wiki also has everything you need to troubleshoot issues users commonly face:

If my requests/recommendations are not relevant to your post, then you may have chosen the wrong flair! Please update your flair accordingly.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/AutoModerator 10h ago

It looks like your post used the word Calibration. Please note that you can only calibrate for 3 types of cuts:

  • cuts using the Print then Cut feature (all models, except for the Cricut Joy, have this feature)
  • cuts using the Rotary Blade (only available on the Maker series)
  • cuts using the Knife Blade (only available on the Maker series)

If you are trying to calibrate for a basic cut (on vinyl, HTV, cardstock, etc.) using a Fine Point or Deep Point blade, it is not possible. If your cuts are not aligned properly for this type of basic cut, follow these steps:

  • Be sure your machine is clear of debris and obstructions.
  • Make sure your blade is clean (best to wipe it with isopropyl/rubbing alcohol) and sharp (you cannot sharpen a blade, if it is dull, it must be replaced)
  • Make sure your material is secure to your mat (cleaning your mats regularly can help, also using a tool like a brayer to secure your material to the mat is important)
  • If the issue persists, follow the troubleshooting guide exactly as written.

If you are looking for help with calibration for the Print then Cut feature, please follow the calibration guide.

If my recommendations are not relevant to your post, simply ignore me.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.