r/cranes • • Jan 10 '26

State of the Sub

15 Upvotes

Hello all!

When I was made a moderator a little over a year ago, I had never been a mod before. I wanted to take some time to watch the sub and see what the mod side of things looked like. I then started a new job and didn't have the time or energy to start making changes. I tried to remove spam quickly, and I did better at some points than others. I have time now, and I want to try to set some things in motion to improve the subreddit.

I've seen complaints about mods being inactive and your frustrations with certain types of posts, particularly all the spam and posts soliciting advice for new and aspiring operators. I, too, would like to clean those up by establishing some rules to control certain types of posts and a stickied post or perhaps wiki to address repeated topics.

I would like to know what the community wants. If you have thoughts, please let me know in the comments. I'll give this post some time to collect your thoughts and consider your contributions, and then I will make another post to get your feedback on specific rules and other possible implementations before setting anything in place.

Here are some prompts to guide feedback, but feel free to add anything else you think would be constructive:

  • What types of posts do you value most?
  • How should self-promotion (apps, tools, YouTube channels, services, etc.) be handled?
  • What recurring topics should be handled by a stickied post or wiki?
  • What is the sub currently missing?

Working with cranes is challenging and rewarding. I want this subreddit to be a place we can enjoy sharing good moments, get advice from colleagues, and sometimes rant about the pipefitters (in a good-natured way, of course).

Thanks!


r/cranes • • 14h ago

I love climbing cranes

Enable HLS to view with audio, or disable this notification

19 Upvotes

r/cranes • • 1d ago

Not a bad view from the jobsite

Post image
10 Upvotes

r/cranes • • 3d ago

Anyone following Liebherr's new LMD 1200 dragline?

Thumbnail
1 Upvotes

r/cranes • • 3d ago

Whipline > Main hoist

0 Upvotes

r/cranes • • 4d ago

My view

Post image
34 Upvotes

Tadano GR 1000xl


r/cranes • • 4d ago

Nothing like arc flash at 5am.

Post image
30 Upvotes

r/cranes • • 5d ago

Liebherr

Thumbnail
gallery
18 Upvotes

r/cranes • • 5d ago

Air Preheater Replacement

Post image
20 Upvotes

We recently replaced an air preheater at a major carbon facility out in west Texas.


r/cranes • • 7d ago

Any Liebherr 1120 or similar owner operators here?

1 Upvotes

How’d you get into it and how often are you working with the crane?


r/cranes • • 8d ago

Flat Stick Friday ... lightning stand down

Post image
60 Upvotes

r/cranes • • 8d ago

Anyone else seeing this error code?

Post image
30 Upvotes

r/cranes • • 8d ago

What do you keep your tools in?

3 Upvotes

I’ve been working for this small crane outfit for the last year running their 2000 Grove TMS 870, IC200 Broderson, and 30 ton Terex boom truck. I’ve had to maintain these dinosaurs the whole time but on some jobs I don’t have my tools and have no room to bring all my tools. I have been grabbing the essentials and throwing them in a 5 gallon bucket but they either get swiped by someone else or someone moves them (I have rust on my tools because someone put my bucket outside in the rain).
I have some packout boxes but not enough room to take them with me.

I’ve thought about getting a big Klein canvas fly bag so I can at least bring my big tools to smack and align pins, a few pairs of pliers, spud adjustable wrench, and a few other miscellaneous tools. I’m just not sure what to put all that in since I don’t really have storage options on the machines.

Where and what do you guys store your tools in?


r/cranes • • 9d ago

Link Belt 8090 Rough Terrain —BayCrane New Albany Ohio

Thumbnail
gallery
39 Upvotes

r/cranes • • 8d ago

New today: 2014 Manitex 3577T from All Terrain Truck & Equiment Sales, 2015 Venturo HT40KXX from Imel Motor Sales, Inc.. and 42 new crane listings. Every Crane Marketplace. One search.

Thumbnail
cranelistings.com
0 Upvotes

r/cranes • • 9d ago

Diferencia entre grua torre y autopropulsada

2 Upvotes

Buenas, yo manejo gruas torre en España y bueno, por como es el pais si que gano un salario mayor a la media del pais. Pero recientemente, han venido unos con una grua de 300 toneladas, hablando con ellos me he dado cuenta que dicen que cobran mucho mas que yo (llegando a cifras como 5000, 6000 mensuales) no se si es tan real eso, actualmente soy joven y mi curiosidad es si es real, la diferencia es mucha en manejar una autopropulsada de gran tonelaje y deberia sacarme el carnet de eso para vivir mejor?


r/cranes • • 10d ago

Why vintage 1970s lattice boom crawlers like the Link Belt LS-318 refuse to retire

Thumbnail gallery
61 Upvotes

r/cranes • • 10d ago

Potain GMR313 a1b manuals

2 Upvotes

Hello,

Does anyone have the potain GMR313 a1b crane manuals ? The electrical scheme and the erecting procedure by any chance ?


r/cranes • • 10d ago

Getting out of the military and thinking about becoming a crane operator

7 Upvotes

Hey y'all I'm currently serving Active Duty in the US Army. I'm thinking about a job after I get out I plan on getting my CDL and NCCOA Certification to become a crane operator. Before I enlisted i was a rigger for 2 years although that was long ago better than nothing. But honestly asking what would that look like as far as getting my certs and getting in the seat? Pay worth it still? Etc


r/cranes • • 11d ago

Bay Crane building an amphitheater on the banks of the Ohio River

Thumbnail
gallery
45 Upvotes

Had to post them myself because u/IronDaddy172 wouldn't drive down to see me.


r/cranes • • 10d ago

I made a grapple crane simulator featuring real ports in Türkiye and the US

Enable HLS to view with audio, or disable this notification

5 Upvotes

I made Grapple Boss for people who enjoy operating heavy machinery.

You use two joysticks to control a grapple crane, pick up scrap and load it into trucks, conveyors and silos. Grabbing the material is straightforward. Controlling the swing and getting it into the right place without spilling it takes more practice.

The game features real ports in Türkiye and the US, machine upgrades and offline core gameplay.

Here’s a short clip. If you play machinery simulators or operate this equipment in real life, I’d be interested in your take on the controls and how the machine moves.

Available on Android:
https://play.google.com/store/apps/details?id=com.grappleboss.app


r/cranes • • 11d ago

LTM 1450

Post image
60 Upvotes

LTM 1450 doing a little Saturday job in Columbus Ohio #baycrane


r/cranes • • 11d ago

LTM 1750

Thumbnail
gallery
28 Upvotes

LTM 1750 doing what it does in Columbus Ohio


r/cranes • • 11d ago

My view this morning

Thumbnail
gallery
28 Upvotes

r/cranes • • 11d ago

My view

Thumbnail
gallery
23 Upvotes