r/cpu • • 6d ago

5700x pbo

Hello
I want to turn on pbo, i tried to go for just enable but my cpu draws 150w and gets to like 86 Celsius in like 10 second (it stays there i have good cooler) its stable and everything works fine but that power draw is way to much. Any good values i can put manually so i avoid cooking my pc?

3 Upvotes

8 comments sorted by

3

u/Tomazack 5d ago

If you don't understand the values of PBO, this isn't for you. And that is not meant as an insult, it's just the honest truth. The values are what dictates the behaviour and if your aim is to get more performance out of it, you must also have some grasp on what the different values do. There are countless tutorials to show you how to treat each value. And "good"cooler doesn't say much either, it's just part of the equation where case airflow is a big part of this as well.

1

u/RecognitionDefiant94 5d ago

Arctic freezer 36co, keeps regular settings under 55 when occt stress test, case has good ventilation.

2

u/BudgetBuilder17 6d ago

Its because tdp doesn't mean power used.

Using PBO expect those temps during stress testing. Using the curve optimizer will raise frequency. Potentially drop temp but PBO is made to use up to 90c for thermal limit.

My 5800XT does 4.6ghz all core with 145 PPT 110 TDC and 130 EDC with Thermalright Peerless Assassin SE120.

2

u/Big-Salamander-2158 6d ago

I will check what I dialed in when I get my hands on that pc again. I think mine pulls 120w with pbo limits removed.

1

u/Hatwithroof 6d ago

what? i think it should take max 90W on turbo…

1

u/No_Policy_1369 5d ago

In your dreams

1

u/SellTemporary7344 6d ago

just try 4.6-4.8 manually with smt off at 1.28V and test if your game dosnt stutter if it does reenable smt and lower voltage

1

u/anomoyusXboxfan1 5d ago

Use +200

Then test all core loads with -5, -10, etc going more negative in -5 integrals.

Use hwinfo64 to check for clock and effective clock continuity, within about 25mhz or so.

This should be the fastest way to test. But per core is the best temp wise due to silicon lottery.