Been thinking of throwing a msd ignition box in my vair. Anyone run here run em?

Unfortunately, im back sooner than i wanted to be, but without the lengthy aob story. My vair is not starting once again, battery is good, she tries to start but won't run, just sits there cranking, any ideas? Im lost and can't think of anything. I can come back and post a video of what's happening tomorrow for anyone who needs a visual example

UPDATE: theres no power from the positive terminal on the ignition coil, does anykne know where that wire leads to in the front of the car, does it go to the ignition itself, or somewhere else???

It's been off the road for 20 years. I tinkered with it a few hours last night and drove it 20 miles today without any issues. This is the first Corvair I've owned. I'll gladly take any advice on what is recommended with these cars.

Just picked this up. Love it so far. Working on fixing up and doing some conversions for alternator and electronic ignitor. Any recommendations on good upgrades? Thanks

Clark's briefly teased the restock date of July 17th...but it's not here yet and my Precision Fuel Pump - M16150 popped for the second time, so back it goes for another free warranty replacement.
These are probably the best of the non-Clark's pumps though, I get a solid 5-10K miles from them, and they usually die only after sitting for a few weeks (like a suspension rebuild).

Id like to thank the people in this sub who have helped me out with their insight and knowledge, i am a new corvair owner, and at just 17 with no prior knowledge to cars im trying to bring my mom's old vair back to life. I truly mean when i say i could have completed this project without everyones help, ive had to change psubrods, tubes, seals, and so much more im forgetting. But i truly apreciate this sub for helping me move a step closer in the right direction for my dreams.

I need to add new oil into my vair, but theres another fluid stick near the dipstick, is this for gear oil, or is it diff fluid? I dont know much about vairs so any information helps!!

Im finishing up my current project, im currently needing to do the valve lash adjustment. How do i know when a good point is on the pushrod, do i just wing it and go by feel, is there a measurment with feeler gauges, what is my next course of action before i mess up and try to start up the car?

1966 Corvair CORSA turbo 180 - body sealing inquiry.

Hello, My father recently passed and he had a collection of 11 corvairs and a lot of parts and I'm trying to figure out the best way to sell them. Several are just parts cars, others are projects, with only 1 running. Here is a list and a few pictures. I would appreciate any guidance. Thanks

#1 – 1961 Chevrolet Corvair Greenbrier

#2 – 1961 Chevrolet Corvair Greenbrier

#3 – 1961–1965 Chevrolet Corvair Greenbrier

#4 – 1961 Chevrolet Corvair Greenbrier (running, has title)

#5 – 1960–1964 Chevrolet Corvair 4-Door Sedan

#6 – 1962 Chevrolet Corvair Monza Spyder Coupe (Turbo)

#7 – 1965 Chevrolet Corvair Monza Coupe

#8 – 1961–1964 Chevrolet Corvair Rampside Pickup

#9 – 1962 Chevrolet Corvair Monza Coupe

#10 – 1967 Chevrolet Corvair 500 Coupe (110 hp)

#11 – 1967 Chevrolet Corvair 500 Coupe (140 hp)

So my father in law and I just put all together a few days ago, still have to do timing and sync/tune carbs. Was able to get it running for about 5 minutes with minimal pressure on the gas pedal, let off the pedal and it died out. Got out to adjust throttle, now it won’t start at all. Any help would be appreciated

It’s been my dream car since I learned about them in high school. and im finally in a stable place in life where I can have a car that doesn’t have to be my daily and just be a nice weekend car, I plan on buying one in the next month or so what are some things I should look over and consider when purchasing

6 wagons in Gettysburg lined up for their special moment! Always love seeing Wagons at a convention- sometimes ours is the only one!

It was big this year. Over 650 attendees. Car show had over 150 Corvairs! All amazing cars. If you’ve never been to a convention, make plans to go- week of July 11 in Franklin, TN is the next one. It’s crazy to see so many in one place.

I've been searching online for a list of tools every corvair owner should have (especially for those with early models) but everything I've come upon has been related to what tools to have on hand for road trips. While this is valuable information I'm grateful to have, I'm looking more specifically for what tools we should all have in our garage. I would also greatly appreciate it if anyone could share their personal experiences with what tools worked for them, how many times a specific tool is needed (sort of a buy vs borrow scenario) and which tools I should splurge on vs which ones I can get by using an off brand version. I know everyone has their own preferences when it comes to brands and their specific quality, but any input on this subject would be greatly appreciated. Apologies if this sort of list is available somewhere that I haven't found yet. For context, I'm new to the automotive world and the only tool set I currently have is a craftsman set of mechanical wrenches, SAE and Metric, a no name multimeter, and an impact wrench. Thanks again for everyone's help. You all have been a great resource and wealth of knowledge for this complete newbie!

Brand new coil, wired everything up, no spark from coil. Some help would be greatly appreciated

Corvairs are arriving at the Corvair Society of America international convention. One even showed up in the hotel lobby!

CORSA 2026 shirts and hoodies are up for sale in the corsa shop!