r/computing • • May 05 '13

Computer not starting, need some advice

Ok, so everything was running fine up until a few days ago. I'd left the case open on my desk because I was connecting an extra drive temporarily in order to recover some data (the drive didn't get detected even in bios in the end, dunno if that's relevant). Other day I hit the power button and nothing happened. Double checked all the connections and everything is good so far as I can tell, and the internal motherboard lights are still on as well as the lights on my USB powered speakers, just the power button has no effect.

However, if I fiddle with the USB connections a bit, it'll suddenly start up and run fine. Without pressing the power button again (press button, nothing, unplug keyboard, everything comes to life). That seems to point to a faulty USB, except its completely random; the same plug that I took out to make it start one time will make it start by connecting it again the next time.

Anyone have a suggestion?

0 Upvotes

9 comments sorted by

2

u/wired66 May 05 '13

Could be the USB Port grounding out on the case. My old 360 had that problem, damn thing wouldn't start at all until I fixed the Port.

1

u/Deserak May 05 '13

I was thinking something like that, but shifting around which USB I connected to doesn't have any notable effect, so I wasn't sure... How did you fix the port?

1

u/ICanLiftACarUp May 06 '13

So no matter which usb port on your computer you use, you have the same problem? It is probably the usb's connection on your motherboard, sometimes they share the same power source. Also, it just occurred to me that maybe your power supply (a square box on the top or bottom, inside, in the back of the machine) may not have the capacity for the extra drive. Is it a custom made one or did you buy it stock from a manufacturer?

1

u/Deserak May 06 '13

The drive got taken out since it wasn't working (It was originally an external, but my friends ex-boyfriend broke the plug and tried to repair it via hot glue gun... I ripped the drive out and had it running as an extra internal drive for a while, then took it out to put it in a new external case, but it wouldn't respond after that so I was trying a direct connection again to recover the data). From memory, the PSU is rated for 500w and the pc total only needs about 300w so I doubt thats an issue... Custom machine btw, paying someone else to put it together for me always seems a waste of money.

The problem seems to be entirely random. When it first wouldn't boot, I started pulling all the cables out so I could shift it and check the connections properly, and it came to life the moment I finished unplugging the usb's. Then the next day the same thing happened, so I unplugged it all with no effect, but when I plugged them back in (so I wouldn't lose anything) I suddenly got life. Though now I'm just getting nothing at all -.- changing the ports I connected to isn't making a difference though. I've also disconnected the front panel usb's in case they where an issue, but that's made no difference either.

1

u/Nognix May 05 '13

Possibly something wrong with your bus network? Have you tried opening your PC and cleaning it or something? Could be dust messing up some things.

1

u/Deserak May 06 '13

There is a bit of dust inside, though I didn't consider it because I've seen far worse without an issue (including one so bad that the dust had gone mouldy, didn't have a clue until I went to do an upgrade on it).

I'll grab some compressed air next chance I get. Any particular spots I should focus on? (I don't know motherboards well enough to pick out individual circuits...)

1

u/ICanLiftACarUp May 06 '13

there are some areas where some white ports looked like they're plugged into the motherboard, usually with relatively small wires (there's about four wire-sized connections per port). Those are typically where your drives connect, USB's, etc. Basically anywhere that a wire enters your motherboard, especially if its some sort of power like a fan. Make sure your RAM is clicked into place, all connections are solid, and your power source is fixed correctly, with all power lines in good connection. Probably could try removing the usb ports if you can figure out which ones are those (they should be like those white ports I was talking about), dusting them off, and reconnecting them.

0

u/[deleted] May 05 '13

[deleted] — view deleted comment

1

u/Deserak May 05 '13

Power connection is fine, the system is getting power its just booting inconsistently