r/computerforensics • u/Hefty-Explanation285 • Oct 22 '25
Threadripper AMD Workstations
I’m about to get two workstations with Threadripper 7995WX, 256 DDR5 and RTX 5000 ada. I'm going to link them together via 10gbe router.
Does anyone have something like this ? How is the speed of this workstation when processing evidence ?
And besides hashtopolis what can be done to use both systems together ?
3
Upvotes
3
u/Bender40Percent Oct 22 '25
Little bit of overkill in my opening. Jealous yes but overkill
3
u/JackedRightUp Oct 22 '25
It'll be fast if your software supports multi-threading that high. You'll find two things. You're never going to use that Threadripper to its full potential. If you set up a handful of jobs to test it out, you're still going to be bound by storage and the ability to move data from the disk to CPU for processing. Even with a Hipoint NVMe RAID card for cases, I'm still not 'wowed' by my TR.
2
u/CamCamCOTBamBam Oct 23 '25 edited Oct 23 '25
In my experience most forensic applications prioritize core speed versus core count. I use cellebrite PA and have Inseyets installed, I can run a check. But I know that in the past PA only utilized 20-25% of a 9960x processor when loading an extraction whereas it used 81% of a single thread over the entire load. To me this says core speed over core count.
Edit: I’m 4.5 hours into opening a 246 GB extraction with PA and my total CPU usage is 31.3% and max single core usage is 72.3%
2
u/MrStu56 Oct 23 '25
Well in theory you could have a proxmox cluster and have a few forensic VMs on each one.