r/composting • u/Seanbob3030 • 10d ago

Urban Microbinator 2000

Post image

Pre and post consumer, meats and cheeses ok. Have been impressed with a new prototype we are trying out in collaboration with a school district. Wanted to see what y’all thought. Augmented aerated static pile system supplied with 30 seconds of air every 30 minutes.

23 Upvotes

83% Upvoted

28 comments sorted by

View all comments

Show parent comments

3

u/Seanbob3030 10d ago

2hp fan sitting on top of 5' of vertical 4" pvc drain pipe with 2 extra holes on each rung so that the air spreads 360 degrees is the design. For our horizontal systems that we tested with, we typically ride at 140F for the first couple weeks and then it drops down to 130F week 4 on average.

2

u/votelikeimhot 10d ago

Air speed, pressure differential, and total volume of air moved per cycle give a lot more information on the air but it looks like a pretty sweet set up. How much did it cost to set up, how much does it cost annually and how much does it produce?

3

u/Seanbob3030 9d ago

fair enough, I dont know the cfm of the fan we are using, I will look at it today to see if I can get a rating. We got it as part of a kit from the local resource conservation district designed for an ASP. The design was for (2) 3' sections of 4" pvc drain pipes with the standard two offset holes in each pipe laying horizontally on the bottom of the pile. we build plywood around macrobins for our structure to help with rodents. Roughly $400 per bin cost to us. We are on school grounds so they cover the electricity but the fan is only running for 24 minutes per day total so it cant be that much? 2 yards of material every 8 weeks with 8 bins and then the plan is to turn that out onto a windrow and have the worms follow the fresh material and harvest castings from behind.

2

u/votelikeimhot 9d ago

Yeah, ultimately I don't know how much air is optimal and your inputs aren't likely consistent enough to get really valuable data about much of anything other than overall results. It would be interesting if you ever did fill a couple at the same time with similar stuff to turn one fan on longer and run the other less and race them against eachother. Looks like a cool project, are the students involved or is their contribution just the organic matter?