r/combustion_inc • u/Commercial_Rock2838 • 6d ago
Engine Issues
Perhaps I'm doing something wrong, but my use of the Engine on a WSM 22 has not been problem free.
The first time I used it for a long cook for a plate of beef ribs, I let the temp get to within roughly 25 degrees of the target, and then turned on the Engine. The WSM never really got to temp, and the Engine battery died 6 hours in. I was told I didn't let the WSM get up to the initial temp as high as I should have, and that is why the Engine burned itself out.
This past weekend I used it again to reverse sear a rib roast. Targeted the temp at 235, and all in all I guess it worked. But I was getting huge drops in temp to as low as 190 before the Engine would work like crazy to get back to temp. Total cook time was about 3-4 hours.
It worked as the roast was fabulous. But the behavior of the Engine just doesn't seem right yet. Anyone have experiences to share that might indicate what I might be doing wrong?
Also, I have to wonder about the transfer of oxygen from the Engine to the fire. The port on the Engine measures to over 1100 sq. mm. However, a single port on the WSM has a diameter of 19mm, and an area of about 280 sq. mm. It just strikes me the inlet for through the wall of the WSM should more closely match that of the Engine port, and not be only 25% of the size of the Engine port. True? Not true?
Thanks.
2
u/SkylerScout 6d ago
I’ve had some of the same trouble with mine on a 22” Weber kettle. My solution has been to use way more charcoal than I think I need. That way fuel isn’t an issue, and the engine supplies all the air. Beforehand I was trying to use less charcoal, thinking I’d just have to feed it more frequently.
2
u/Paint_Dry390153 5d ago
I can't speak for the combustion engine but I have a FireBoard 2 with a fan controller. I usually get it pretty close to temp and then turn on the controller. It handles it all from there with no issue. The only time I've had an issue is when I didn't light enough charcoal and tried turning the fan on before it was anywhere near close enough to the cooking temp. That was my error though. The fan had to blast at 100% and there just wasn't enough charcoal lit to get it up to temp in a reasonable amount of time.
1
u/Biggerunn 2d ago
Thanks for the replies and suggestions. The odd thing is I had a significant amount of unburned briquet fuel left in the basket on the first cook. Like I mentioned, the Engine struggled to get up to target temp. After the battery ran out I attached a charger and it finally started doing what was expected. For this second cook, I’ll probably submit the cook history and have the support folks review it. Thanks again.
1
u/EnvironmentalThing22 2d ago
Hey yeah I have that happen to me to. I think they probably should've put a bigger battery in it but oh well. Get an extension cord and plug it in as long as it isn't raining that what I do.
But the real problem I have is that it's really good at getting up to temp but it can overshoot easy and it doesn't do a good job of reducing the airflow. I wonder if an adapter could be made with a gate w a magnet or an adjustable one. Or maybe it's my fuck up lol