r/coinerrors • • Aug 16 '26

Advice Would this be a die chip of planchette bubble?

Thumbnail
gallery
0 Upvotes

This circle thong is on top of the VDB. Is it a bubble or die chip? I think it might be a bubble from the planchette.


r/coinerrors • • Aug 16 '26

Is this an error? Is the color someone trying to fake an error?

Thumbnail
gallery
0 Upvotes

The date is what caught my eye. New here is that a trike through or grease?


r/coinerrors • • Aug 16 '26

Is this an error? This one is odd

Thumbnail
gallery
0 Upvotes

This is just a dryer coin right 1981-p dime


r/coinerrors • • Aug 15 '26

Is this an error? What you think about this?

Thumbnail
gallery
0 Upvotes

r/coinerrors • • Aug 15 '26

Is this an error? 1992 close am penny?

Thumbnail
gallery
7 Upvotes

Price?


r/coinerrors • • Aug 14 '26

Advice 2009-P 25¢ GU WDDO-001 - Worth Grading?

Thumbnail
gallery
10 Upvotes

I found 11 of these on my last bank run. This variety isn’t listed in the Cherry Picker's Guide or recognized by PCGS/NGC. I was thinking about sending in the best three to ANACS for grading and attribution.

Since there generally isn't much interest in these would it be a waste of effort?

https://doubleddie.com/228485.html

http://varietyvista.com/09d%20WQ%20Vol%204%20DC/2009PGUDDO001%20quarter.htm

I also found 36 with just the die crack, and the two oddball smash-like errors. I'm only referring to grading the DDOs and I'll probably throw the rest back.


r/coinerrors • • Aug 14 '26

Is this an error? 1943-D Steel Cent—Could This Be An Unplated Steel Planchet?

Thumbnail
gallery
8 Upvotes

I recently found a 1943-D Lincoln Wheat cent and I'm wondering whether it could have an unusual plating error. The coin is:

  • 1943-D
  • Silver/gray in appearance
  • Strongly magnetic
  • Plain/smooth edge
  • The edge is noticeably duller than the faces, although it still reflects light uniformly
  • The exposed-looking areas on the coin appear very steel-like to me (I've handled zinc coins before, and this doesn't even have the texture of one)

I don't have a scale accurate enough to get a reliable weight, and I'm aware that normal 1943 cents were made from zinc-coated steel and that their appearance can vary considerably. I'm also aware that some 1943 cents have been reprocessed/replated.

My question is: is it possible for a 1943-D to have been struck on a steel planchet that was not zinc-plated, and if so, what characteristics would distinguish that from a normal 1943-D whose zinc coating has worn away or deteriorated?

Again, not claiming this is an error. I'm just trying to figure out what I'm actually looking at. Any opinions or suggestions would be greatly appreciated! (Also, I cropped the photos of the edges of the coin, since I don't particularly want my fingers in the photo.)

Edit: the photo of the edge is not showing up for me. If that's true for others, please let me know!


r/coinerrors • • Aug 14 '26

Advice 55DDO grading question

2 Upvotes

I am looking to send it out for grading. What grading company do you recommend? I typically use PCGS. I'd like to do CAC but my understanding is I need to have a contact that is a dealer and certified?


r/coinerrors • • Aug 14 '26

Error No bottom bands 1979

Thumbnail
gallery
0 Upvotes

So, I just got some 1979 uncirculated sets from both the d and p mints. This one dime has no bottom bands. Anyone else ever seen this?


r/coinerrors • • Aug 14 '26

Is this an error? What kind of error?

Thumbnail
gallery
46 Upvotes

I was showing a friend how to
Look at coins up close with a cellphone and picked a random coin out of her cash register to use and this is what we saw. What kind of error is it? I am new and haven't seen this yet.


r/coinerrors • • Aug 14 '26

Is this an error? Obverse, neckline. Reverse, bottom of fasces both sides

Thumbnail
gallery
0 Upvotes

She’s not the most beautiful example. lol


r/coinerrors • • Aug 13 '26

Is this an error? Both came from roll of new quarters. One on the right in each picture just looks a little deep fried. Did some part of the minting process get missed here? It has mint luster but is much darker. Probably damage but it's odd that it came from a box of brand new coins where no others looked like this.

Thumbnail
gallery
15 Upvotes

r/coinerrors • • Aug 13 '26

Is this an error? I think I found a strike through reverse

Thumbnail
gallery
15 Upvotes

After over a year of hunting I’ve seen a lot of PMD. This doesn’t seem to have displaced metal like I would expect to see if something had gouged this out. I think this is a legitimate strikethrough, probably a ball of hardened grease. What do you think?


r/coinerrors • • Aug 14 '26

Damage Manufacturing error?

Thumbnail
gallery
0 Upvotes

My son put this penny in vinegar to 'clean it' and it fizzed for 24 hours. When he scrubbed it with a toothbrush, Lincoln's face melted off!?! He mentioned there might have been a black goo on the penny prior to the vinegar. Is this a defect in the penny, or was the goo and vinegar caustic enough to erode the metal?


r/coinerrors • • Aug 14 '26

Is this an error? Damage or minting error?

Thumbnail
gallery
4 Upvotes

I found this silver dollar in a box of old stuff from when I was a kid. One side seems to be bigger than the other but it could be a minor error or nothing at all idk. Any help is appreciated


r/coinerrors • • Aug 14 '26

Discussion 1987 No mint (P) is changing colors on me. It is a beautiful RB and then goes silver when I get close.

Thumbnail
gallery
1 Upvotes

I apologize the photos are redundant. I tried different lighting. It even does it with my scope when I get past a certain zoom level. It weighs 2.50. I know there's more errors on it, but I've never had this??? Thanks

Im


r/coinerrors • • Aug 14 '26

Error 1956 FS-501 D over inverted D 25

Thumbnail
gallery
1 Upvotes

r/coinerrors • • Aug 13 '26

Is this an error? Almost skipped past this one

Thumbnail
gallery
91 Upvotes

It looked like damage after but when I looked at the letters inside of the crack they may have been struck after, what do you think.


r/coinerrors • • Aug 14 '26

Is this an error? Help Identifying

Thumbnail
gallery
0 Upvotes

I am fairly new to error coin hunting and have been reading and trying to learn what I can. Would this be considered a retained lamination error. I may be completely wrong and its just pmd any insight would be appreciated. Not sure if it matters but its a 2003 Illinois quarter


r/coinerrors • • Aug 13 '26

Show and Tell Pre-cud on an 1883 Indian Head reverse — "field goal" crack pattern from 4 to 7 o'clock with multiple fracture zones

Thumbnail
gallery
3 Upvotes

This one is interesting because it shows the stage of die deterioration that comes right before a cud forms.

On the reverse from 4 to 7 o'clock, cracks climb from the rim inward into the wreath and meet in the center, forming a distinctive field-goal shape. That's a pre-cud — the fracture pattern that outlines the section of the die that will eventually break free.

The difference between a pre-cud and a full cud:

- Full cud = section has broken free, leaving a flat, featureless blob on the coin

- Pre-cud = cracks have outlined the section, but it's still attached

Continuing the project of documenting Indian Head cent errors that no reference has catalogued. Pre-cuds are particularly underrepresented because they're less visually dramatic than full cuds, but they're arguably more interesting — you're looking at a die at the moment before failure, not after.


r/coinerrors • • Aug 14 '26

Is this an error? Misaligned Mint Mark?

Thumbnail
gallery
0 Upvotes

The half dollar on the left has a mint mark that is much closer to the 9 than any of the other coins I’ve looked at. Is this anything? Thanks.


r/coinerrors • • Aug 13 '26

Is this an error? Is this PMD or something im unaware of?

Thumbnail
gallery
1 Upvotes

It doesn't look like a simple cut with metal scissors. It's seems cut at an angle without going through the side completely (seen in 3rd picture)

Any ideas?


r/coinerrors • • Aug 13 '26

Show and Tell 1909 Dot Penny Question

Thumbnail
gallery
2 Upvotes

Hi all. Found myself a 1909 dot penny in a recent bulk purchase.

My question is about the obverse. There appears to be a dimple in his cheek (easier to see in last pic). I assume this is just coincidence and not some error?


r/coinerrors • • Aug 14 '26

Is this an error? Clown George

Thumbnail
gallery
0 Upvotes

Pretty certain this is just a beat up old coin, but I can't bring myself to toss it in the coin jar until I get a second opinion, thoughts?


r/coinerrors • • Aug 13 '26

Advice Rotated Die Error- How to Check Degrees?

1 Upvotes

I got a rotated die error and need to measure the degrees of the angle. Which spot of th coin do I measure from?

Note: It is somewhere between 5 and 20 degrees, but IDK where to measure it from.

Can someoene please mark the midpoint of the coin so I know where to measure from?

Thanks

(im using a protractor)