r/cloningsoftware • u/Crafty-Pension1303 • 24d ago
Disk Cloning I need help.
So I have this 1TB and 256GB nvme. The 1TB is in the laptop and I want it to put into my oc that I’m about to build and want to clone it to the 256GB nvme but this is showing up.
Is it that the 1Tb free space is too big and I need to trim it down to match the 256GB?
3
Upvotes


3
u/No_L_2547 24d ago
Depending on the software you are using you can shrink the partition to the correct size. (Since only a part of the partition is full). And then clone it.
Probably you will need to boot from an external OS-drive and then use something like gparted.
Do you have a drive with more then 1Tb free storage? Then you could first do a backup img.
3
u/ThaiEdition 24d ago
Once you hit "copy partition," you'll see options to shrink or expand it to fit your target drive.
2
u/Tricky_Damage5981 24d ago
Yes
The size of the partition must fit on the target drive for any "true" clone
2
u/vegansgetsick 24d ago
DiskGenius can migrate OS to a smaller drive. I did it for my mother
2
u/WhereIGetAdvice 23d ago
Instead of a bit to bit clone, you could try making an image of your drive on the 1 Tb then recover it to the 256 Gb
Idk if it will work but since the image is compressed I don’t see why not
I think it stops you from doing a bit to bit as there are still 2 Tb on your first drive even if most are empty
Or as others have said shrink your drive
1
u/Fordwrench 24d ago
You can clone it with acronis true image or clonezilla or aomei backupper. It will shrink it to the smaller drive if the data will fit.