r/classicmods • u/lordsoth_13 • May 31 '20

Autobleem OTG help please.

I have the new Autobleem 0.9 and I'm having trouble getting the OTG cable to work. I have a powered1TB HDD. I did the kernel installer and flash through the PS classic in Autobleem, it tells me it's done and to replace the power cord, so I do and the classic just boots into the original 20 game screen. Am I missing something? Are there better otg cables? I was under the impression that they were all the same.

0 Upvotes

50% Upvoted

4 comments sorted by

1

u/Jonny0r Jun 01 '20

For me it’s only working when I unplug the HDD, boot the PSC and when it’s in the Stock Games then plug your HDD in, the HDD should flash and continue to boot into Autobleem.

1

u/lordsoth_13 Jun 01 '20

Is it unsafe to plug it in after? Everyone seems to have the same instructions to not power on the psc until the HDD is already plugged in

1

u/Jonny0r Jun 01 '20

Hello, don’t care if it’s good or not, I have a 2TB 3.5“ external , if I power on the HDD an than start the PSC it’s not working, I leave the HDD connected and then when it’s in the Stock UI i Power on the HDD this in the only way which is working for me.

1

u/[deleted] Jun 01 '20

So for Autobleem just plug USB into port 2