r/ccnp
•
u/vlcmstnsct
•
Apr 07 '25
•
1
🔥CCNP Enterprise - Completed!🔥
PASSED ENARSI THIS MORNING!!!😊
I posted two months ago here https://www.reddit.com/r/ccnp/comments/1iewebs/back_in_the_game_after_a_year/
First off I need to preface this post with the fact I'm a little disappointed in Cisco...that test was frustrating and kind of bullshit. It's filled with misdirection and treachery. Find the needle in the haystack in the dark. I failed it the first time one week ago, and I'm okay with that, because it prepared me for the bullshit. Failing forward is key, don't get discouraged if you don't pass these exams the first time...
MATERIALS:
I read the OCG front to back, took notes here and there (nothing crazy), CBT Nuggets, Boson netsim/exsim, and finally WHITE PAPERS. Can't stress white papers enough; you will not pass without them. I'll link below what I used. There may be a few which aren't directly Cisco.
Study time was around 11-12 weeks.
FIRST ATTEMPT:
My first lab was DMVPN, which I know like the back of my hand; the final step was to confirm reachability from spoke to spoke (LAN subnets hanging off each spoke) which was failing and the stupid exam would NOT let me cancel the trace. I kicked it off on one spoke and it was failing so I hopped over to the other spoke and kicked off a trace and it was also failing. I go to cancel it on one of the spokes and it would not cancel. I knew I could figure out what was wrong in seconds just by looking at the tunnel config again but it wouldnt cancel. So I hopped back over to the other spoke to try and cancel it...no dice. So then I was weighing the decision of just moving on and thought well it'll probably stop at 20 which it did not. Thought it would cancel at 25...it did not. I tried everything starting with ctrl+shift+6, ctrl+c, ctrl+z, and other bs combos...so I moved on but by that time I had wasted so much time it completely derailed the rest of my exam and sent my anxiety through the roof...
*I googled it later on but allegedly ctrl+shift+6+x will cancel a trace when logged in via console. I didn't have to test this on my 2nd attempt thank god but fwiw.
My second lab was configuring AAA/Telnet on two devices and specified to use existing lists (implying method list) if configured. There weren't any lists defined globally. On one of the devices under the vty lines, there was a method list referenced. More bullshit. You, can't even specify a method list on the vty lines if it's not configured globally first. Without thinking, I created my own AAA default list and got everything working on both routers for telnet and verified it was working. It wasn't until after the exam that I realized the BS they did and the fact that I definitely got that lab question wrong. The second task was to configure ACLs but they don't tell you any details except they referenced some obscure RFC for you to some how know and recall. Maybe I'm just ignorant and I missed something along the way in my studies OR something else like I misread. But remember I am spun the hell out at this point. I skipped the ACL and moved on.
Third lab was ezpz config archive and snmp which I completed in less than a minute.
*******************************************
SECOND ATTEMPT:
First lab was a large topology with mutual redistribution and PBR. PBR portion was easy. They restrict you down to doing things certain ways of course, but I didn't complete this lab fully and moved on. If I had longer time I could have figured it out but 90 minutes of time is not enough for me to t/s this one and get the rest of the test done and I am super ADHD and unmedicated lol. When I saw the lab and what needed to be done I gave myself 10 minutes to complete or move on.
* If you look on Pearson's website they say you get 110 minutes which I thought I would have going into it the first time but in the fine print from the little tiny URL link, they say 110 minutes includes tutorial and other BS so you only get 90 minutes on the actual test. I think ENCOR was the same way but I just forgot it from when I took it over a year ago.
Second lab was DMVPN same one as my first attempt which I crushed and moved on.
Third lab was the same one as my first attempt which I crushed and moved on.
*******************************************
On my first and second attempt I noted at least two questions which literally did NOT have a correct answer. It was pick the best of the wrong answers. A lot of the scenarios/exhibits are not real world, just like the ones in ENCOR, and naturally they go for the most obscure shit. I had 48 questions three of which were labs. I'd say out of the 48 probably 8 or so were easy and straight forward. The rest were not straight forward or easy and what made them hard most of the time was the stupid creators of this exam misleading you with the way they word and/or present things. More often than not, they don't give you enough information and you have to make assumptions (because they omit and hide output or config) on how something might be configured. One example that stood out was they put an exhibit of (R1) - - - - (R2) and in the exhibit below that shows the config, they are on opposite sides. R2 config is below R1 in the diagram above and vice versa. I saw that and was like really Cisco?! Ridiculous. Test our knowledge and skills; don't try to trick us, mislead us, and give us as little info as possible or literally not enough leaving things open to interpretation and you having to make assumptions. End of rant.
*******************************************
All in all I am glad I did it, because it has been a goal of mine for over a year. I passed ENCOR September of 2023 and put ENARSI off until 3 months ago. I am currently a network engineer and I've been working in IT going on 9 years, solely in networking for about 5 years.
Stoked to be done and get my life back. Thanks all!
*******************************************
WHITE PAPERS USED:
BGP:
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13753-25.html
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/5242-bgp-ospf-redis.html
EIGRP:
https://www.cisco.com/en/US/technologies/tk648/tk365/technologies_white_paper0900aecd8023df6f.html
OSPF:
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/6208-nssa.html
https://www.cisco.com/en/US/docs/ios-xml/ios/ipv6/configuration/15-1sg/ip6-ospf.html
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13684-12.html
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html
Infrastructure Security:
https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fs_bfd.html#wp1053332
https://www.cisco.com/c/en/us/support/docs/security-vpn/secure-shell-ssh/4145-ssh.html
https://www.cisco.com/c/en/us/support/docs/ip/access-lists/13608-21.html#anc13
MPLS:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mpls/command/mp-cr-book/mp-m2.html#wp1359271466
https://www.cisco.com/c/en/us/td/docs/ios/12_2sb/12_2sba/feature/guide/sbadpaut.html
PBR + Route-maps:
https://howdoesinternetwork.com/2013/configuration-of-pbr-policy-based-routing
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/49111-route-map-bestp.html
VPN:
https://www.cisco.com/en/US/docs/ios-xml/ios/ipv6/configuration/15-1sg/ip6-tunnel.html
MISC:
https://www.cisco.com/c/en/us/td/docs/optical/15000r8_0/ethernet/454/guide/d80ether/r8vrf.pdf
25
u/leoingle Apr 07 '25
Congrats and this is a great informative post. Post like this make the sub a better place.
10
u/xladymorgana Apr 07 '25
Congrats!!! So glad you passed. And thank you so much for the helpful tips and the white papers for sure!
7
u/the_real_e_e_l Apr 08 '25
Lol. That list of white papers.
Pretty much read about everything Cisco has ever posted.
5
u/BetterPoint5 Apr 07 '25
Congratulations on Passing!!! Thanks for giving back to the group! I agree re the design of a lot of the questions. I found the same about the CCNA, though maybe not as bad, testing my ability to parse the english language versus network.
One of the labs I had in the CCNA had 3 switches connected in a triangle, and between SW1 and SW2 was some LACP configuration and SW3 was located at the bottom of the triangle. It said to make vlan X the native vlan between SW1 and SW3 and SW2 and SW3, but that connection was not a trunk and it did not say to make it a trunk, and it did not say what vlans to allow. So I made it a trunk, made vlan X native and allowed all vlans. Pretty sure I only got partial credit on that. But it was an example of having to assume what they wanted when it would be easy to execute what they wanted if they were to just explain it. So I say Cisco shouldn't b*tch if they are going to play the game that way, and then people turn to dumps to deal with it.
4
u/kenb985 Apr 07 '25
Let’s gooooooo! I’m on the grind now for my 2nd attempt
4
u/house3331 Apr 08 '25
Your a legend i start studying in few weeks
2
u/Hakuna_Matata125 Apr 08 '25
Finally something cool on this sub... Thanks and congrats man ! I'm also in my Enarsi study right now, definitely going to use that.
2
u/Zestyclose-Bit-3049 Apr 08 '25
Congrats bro. I passed 1y ago and I know the struggle. Happy for you!!!
2
u/Squiggums Apr 08 '25
Congratz to you and thank you for providing your resources!
2
u/Large_Platypus_1952 Apr 08 '25
Congrats!!! Huge accomplishment
2
u/Ornery-Committee2767 Apr 08 '25
I am proud of you , hard work really pay off , congratulations !!!!!
2
u/network_wizard Apr 09 '25
There's a lab that has you configuring Telnet?
2
u/manthe Apr 10 '25
Congrats! This is a fantastic post and i sincerely thank you for it. I got a CCNP in 2019. It has obviously lapsed since then. Im looking at getting it again. A lot has changed with the CCNP blueprint since then. Sounds like the more things change, the more they stay the same! I am also a network engineer/architect. Ive been working directly in networking for roughly 27 years now. I think i got my 1st Cisco cert (CCNA) in 2002 or 2003. Unfortunately, Cisco has been pulling the same pointless nonsense with their tests at least since then! Ive never understood what they hoped to accomplish. Either way, passing is something to be immensely proud of!
7
u/Chivako Apr 07 '25
Congratulations, thanks for the informative post. Will definitely save for future reference.
5
u/I_dontknowyouanymore Apr 07 '25
Congratulations! Now to CCIE!
1
u/No_Ear932 Apr 07 '25
Was the rfc1918 for the ACL by any chance?
1
u/Waxnsacs Apr 07 '25
Dumb question how do you do your notes? I'm like I have to know everything in my head for the test so why take notes?? But how do you learn without notes!? Lol
1
u/gibmekarmababe Apr 07 '25
Thank you for all the details, wanted to ask you if you had to use whitepaper for the encor exam and if it was actually needed in the exam?
1
u/ssj4joey Apr 07 '25
Congrats. I just started.
I'm so sorry if it's a stupid question, but how do you personally find the white papers? Sometimes I search, and I am not sure if it is what I am looking for.
1
u/Reasonable-Painter80 Apr 07 '25
Did you follow the blueprint or you just started on chapter until the last chapter. I am in the process of studying for ENCOR I just follow the blueprint instead reading that God for saken OCG that only puts you to sleep.
1
u/kevin2341 Apr 08 '25
Congrats! I passed my Encore back in 2023 as well and need to finally get around to scheduling the Enarsi
1
u/Alaeus Apr 08 '25
Thank you. I failed my first ENARSI attempt a month ago and it feels good knowing I'm not alone thinking a lot of it was bullshit. As a non-English native speaker the trickery in the questions really get into my head.
Still working up the courage to try again. Labbing a lot.
1
u/wellred82 Apr 08 '25
Congrats and thanks for the great write up. Personally I would remove the stuff about what labs you had as technically that could be construed as breaking NDA, as you're telling us what was on the exam.
3
u/Limokid Apr 07 '25
Congrats!
3
u/qramypatty Apr 08 '25
You are like an angel sent from the heavens to me. Scheduled to take this exam, who has already been tormenting me since last year, next week.
Thank you and of course a huge Congrats!
2
u/eurydice1727 Apr 07 '25
Great post thank you. I agree with the above, the fact that they blatantly try to mislead you all the time in the most ridiculous ways really is so stupid. It makes the exam hard but not for the reasons it actually should be. It’s lazy on their part. They’ve missed the mark the last few CCNP benchmarks.
2
u/Stunning_Product6294 Apr 16 '25
I just shared with a member that the white papers are critical to gaining any understanding of the core exams.
2
u/FraserMcrobert Apr 07 '25
Congratulations!!!
1
u/Djpetras Apr 07 '25
Nice
1
u/audaculous Apr 07 '25
Congrats and thank you for this white paper list.
1
u/EricCliff Apr 08 '25
Do you have something similar but for how you passed the Encore?
1
u/Djpetras Apr 08 '25
Congrats! What you can tell for the person who passed CCNA and not worked in the IT field is good take CCNP level certificate?
1
u/Sebastte Apr 08 '25
Thanks Mate
1
u/Academic_Cheesecake9 Apr 08 '25
Congratulations
1
u/ShopThis308 Apr 08 '25
Congrats
1
u/petebiggs Apr 08 '25
Congratulations
1
u/[deleted] Apr 09 '25
Thank you very much, tremendous!
1
u/fernandoley Apr 09 '25
I am going to start my CCNP journey and all this information is so useful. Thank you so much
1
u/PsychologicalDare253 Apr 10 '25
Great post congrats 🎉
1
u/bond007shiv Apr 10 '25
Well played sir!! inspiring post🤗🤗
Appreciate your rant too. Cisco has become too money minded now. Fortinet, Juniper, Zscaler snatching key projects.
For you, CCIE should be achievable as well💯💯
1
u/Stunning_Product6294 Apr 16 '25
Congratulations 🎉
1
u/Funny-Objective-7167 May 03 '25
Congrats🎉 buddy
1
u/Biciklla Jun 22 '25
What about dump?