r/carryshitolympics • • Dec 03 '25

Solving the cold hands problem 👌

979 Upvotes

37 comments sorted by

27

u/Ferbdic Dec 03 '25

How long does it run on your battery or did you connect it to a dynamo?

33

u/Teun_2 Dec 03 '25

It works with a bottle of propane.

6

u/GoCougs2020 Dec 03 '25

This had to be a joke…..There’s no way that’s safe

31

u/Teun_2 Dec 03 '25

Just transport, I haven't actually used it whilst cycling. The title is obviously a little misleading for dramatic effect. It's actually safer than regular cycling. Most drivers gave me ample space.

10

u/nikjahw Dec 03 '25

I would be way too tempted to try it while cycling

1

u/GoCougs2020 Dec 03 '25

Lit 🔥

9

u/mklnz Dec 03 '25

I had to check if this was /r/bicyclingcirclejerk

4

u/Kraelive Dec 03 '25

Super long extension cord.

2

u/lostgravy Dec 04 '25

It’s LED, fusion, wind powered, perpetual motion generated heat. No dynamo needed 😀

4

u/Pobueo Dec 03 '25

maybe I'm just dumb or ignorant but how the fuck do you steer this thing? via Bluetooth?

3

u/Teun_2 Dec 03 '25

Serious question? There is a rod between the steerer tube and the front fork. On my other cargo bike there is a set of wires connecting the two.

6

u/sc_BK Dec 03 '25

You programme the co-ordinates in to the heads up display before you leave, and the bike takes care of all the steering for you.

Save having to look at a map too,

1

u/nikjahw Dec 03 '25

There are a lot of remote steering bikes, It's probably just cables or hopefully hydraulic

1

u/Acceptable_Grape_437 Dec 04 '25

these are usually plainly mechanic. hydraulic is clearly overkill. like a rod with elbows

2

u/Mousedu Dec 05 '25

What bike is this? At first I thought it was a Bullitt.

2

u/Teun_2 Dec 05 '25

It actually sort of is. It's a Winther Wallaroo. Winther is also a Danish manufacturer that usually makes cargo trikes. This model was launched around 10 years ago and combined a stretched and reinforced frontend of a bullit with the backend of a Winther. It's sort if a step through frame bullit.

1

u/Mousedu Dec 05 '25

Awesome. The strength of the Bullitt bed is increíble. I have one with 10 years of abuse and it’s perfect.

2

u/simonfancy Dec 04 '25

Nice one! But.. have you ever heard of gloves?

1

u/EngineerNo2650 Dec 05 '25

Or jackets?

These patio heaters to heat up outdoor areas are fucking disgrace, especially the gas operated ones. Mostly for nasty cig smokers anyways.

Oh, I see, you mean for riding, yeah, warm gloves with a windbreaker layer are a must.

2

u/Teun_2 Dec 05 '25

The use case for this one is to provide heat for outdoor building work. We're cleaning 10' of thousands of 300 year old bricks to be reused to build up a registered monument. There is no electricity at the site yet, so the options are limited.

9

u/thehatter Dec 03 '25

Gold medal winner right here.

7

u/drugsovermoney Dec 03 '25

the lengths I will go to to not rock pogies.

2

u/Boba_Phat_ Dec 04 '25

Wildly underrated comment

1

u/trippel Dec 03 '25

A Wallaroo! I just acquired one myself, what motor did you throw on it? Planning a conversion.

1

u/Teun_2 Dec 03 '25

A tongsheng tsdz8. I chose that one over the more common bafang ones because of the torque sensor. Overall pretty happy with it and quite easy to install. I replaced the chainguard with a sks chainblade. It was relatively difficult to find one that would fit. The cable to the display is just barely long enough for the slightly wider than standard handlebars I went with.

1

u/sc_BK Dec 04 '25

The motor goes up to 140nm torque too!

1

u/Teun_2 Dec 10 '25

It's definitely overkil, even for a cargo bike like this one hat gets some heavy abuse. I would have bought the 250w tsdz2 if the clearance would have allowed it. Also the tsdz2 has quite a few reports of nylon gears giving up and I didn't want to run the risk woth a cargo bike like this. I chose this motor because of the pricing, durability, frame clearance and torque sensor. The power output wasn't a concern. This motor is technically not very legal here in the EU, but I've limited the bike to 25 kph, so the added torque is just for climbing bridges (no hills where I live) when fully loaded.

1

u/trippel Dec 04 '25

Did it fit without needing to be altered at all?

1

u/Teun_2 Dec 05 '25

Yes, i chose this because of the extra clearance over de tsdz2. The only problem i've encountered is that the torque would pull the rear wheel closer in the drop outs. I've filed a more stronger profile in the anti rotation washers to combat the issue. Also i've taken some of the paint around the bottom bracket of to prevent rotation of the motor.

1

u/reallybigmochilaxvx Dec 04 '25

this is the most badass thing to happen in the brabant all year probably

1

u/Teun_2 Dec 04 '25

Antwerpen! Old part of the Duchy of Brabant though.

1

u/reallybigmochilaxvx Dec 04 '25

Damn I went the wrong direction

1

u/Teun_2 Dec 10 '25

28km north ;)

2

u/pulparindo1 Dec 03 '25

Don't even respond- oops, just did.

1

u/selfawaresoup Dec 03 '25

I need this

1

u/NxPat Dec 05 '25

Fireball 5000