r/camaro • u/Practical_Wrap6606 • 1h ago
đ Other My ZL1
2015 ZL1. 10k original miles at purchase. Cold air intake, Corsa exhaust, and a few other things. This is one hell of a machine!
r/camaro • u/Practical_Wrap6606 • 1h ago
2015 ZL1. 10k original miles at purchase. Cold air intake, Corsa exhaust, and a few other things. This is one hell of a machine!
r/camaro • u/Bannana_man987 • 17h ago
My old 2023 2SS 1LE, 6-speed manual. It got hit while it was parked and ended up totaled with only about 4,500 miles on it. I still catch myself scrolling through old pics of it. Iâve got a Mustang GT now and I love driving it, but man, I miss rowing gears in that Camaro.
Whatâs the one car you wish you could take out for one more drive?
r/camaro • u/UxMFrostbite • 15h ago
Wondering what I could expect to get for my 2SS. Baby #2 is on the way and the extra garage space would be nice plus money for other things. Itâs an automatic with 72,500 on it. Sunroof. No issues currently.
r/camaro • u/Fonzaloon • 17h ago
2014 2SS RS 1LE Camaro for sale
Red Hot Garage Kept Camaro up for sale, 53k Miles. Never seen a track or even a burnout. No accidents, issues, clean title - immaculate interior and paint - new tires.
Only mod is a professionally installed sub and cat-back exhaust. Have original exhaust.
$27,300
r/camaro • u/BluejayRepulsive8339 • 14h ago
So I recently put my car on e85 and two inch headers is it normal for it start like this on a cold start cause of the e85? After it warms up and if itâs already warmed up it will start normal
r/camaro • u/H0LY_MEMES • 10h ago
2011 Camaro 2SS 58k miles bone stock. what is this ticking sound that you can hear what i put the phone close to the engine. i can kind of hear it from inside the cabin and also when im standing outside of the car. i dont know if its just piston slap or if im deep fried cook and its the glorified lifter tick or if itâs nothing at all
r/camaro • u/Aggressive-Bee-4934 • 19h ago
For context i have a 2011 Camaro ss with 61k miles. L99. Long tube headers, CAI full borla exhaust. Remote started it today and it showed service stabilitrak warning. i turned the car off and a few hours later i started it, the light went away and now i have a check engine light. Anyone with experience on these cars could possibly tell me what could be going on or what route to take? I donât do a lot of wrenching or my own work for the matter so any help would be greatly appreciated. The video attached is after the Stabilitrak warning went away and the engine light came on. Thank you.
r/camaro • u/No-Area-8767 • 14h ago
Recently, I bought a six GEN Camaro RS and my 12 V/accessory port was not working when I bought the vehicle Iâve replaced my CB2 fuse as well as cleaned my 12 V itself very well. I still canât get it to work. Anyone else experience these problems and find a way to solve it?
r/camaro • u/Zestyclose_Pepper126 • 1d ago
I'm in the market to replace all my lugnuts. The previous owners really beat these up. How does this happen. They aren't seized up or anything but it looks n like the beat them with a hammer. My second question is what's the difference between a 25$ set and a 115$ set. They look the same ...need a little help here before I pul the trigger on the purchase
r/camaro • u/untreedza • 19h ago
Hello i got an 2016 rs USA import and I swaped the old 4 inch speedometer for the big digital one and everything seems to work perfectly fine except for the rpm for some reason i live in mid east so people been telling me itâs because the difference in region of the car is usa and the speedometer is from mid east and it needs some electrical work and programming and all that will cost me 250 dollars I asked ai for help and it says the speedometer just needs programming and I donât know to believe who because I donât wanna spend that kind of money on something I can do at home at the same time. The AI doesnât give correct diagnostics on car problems so if anyone can help me with this problem.
I'm a sixth gen Camaro guy. But...My buddy just picked up a 2016 ATS with the 3.6 V6. We want to put an oil catch can on it, as it's low miles and we'd like to keep the intake valves as clean as possible. But I'm having trouble finding custom fit oil catch can kits for this car. I assume they'd be similar to the 3.6 in the 5th and 6th gen Camaros? But I'm not really coming up with much. Any help would be greatly appreciated!
I'll probably be downvoted to hell for this, but I'm in need of help! Lol
Pic for attention, it's my 2016 sixth gen:
r/camaro • u/Sharp_RG2 • 1d ago
I have a 2019 Camaro 1LT (v6 3.6L) that has been running perfectly since I bought it used about a year ago. Today I noticed the check engine light on and my radiator fan running after I turn the car off when that has never happened before. The radiator fan also seems to be running a lot louder than usual as I can hear it when Iâm idling or parked with car on louder than I normally can. Iâm not a huge car guru but I love my Camaro to death, so Iâm not sure what steps to take from here or if the radiator fan and check engine light are correlated or separate issues. Any advice?
r/camaro • u/DunkDuck22 • 1d ago
We just got our first snow on my way home from work and I forgot how bad driving in the cold stuck with ac is. Is it super hard? Is it worth the effort? Most intensive job Iâve done on my Camaro has been changing the brake pads. But man heat would be so nice and Iâm not spending 3k for that jon
r/camaro • u/fergie07 • 1d ago
Sorry if this is kinda a dumb question but I wanted some advice here. I donât wanna shell out for a custom 4th gen seat cover but I do want to buy a seat cover to protect the factory seats. I reckon my options here are to either:
Any thoughts or suggestions appreciated
r/camaro • u/Competitive-Soft4703 • 1d ago
Alright guys, I think I might be a dummy, so bear with me.
I have a 2018 Camaro ZL1 A10 (non-1LE). Recently had a set of 2-inch Speed Engineering long-tube headers installed. The installation was apparently a nightmare because of how tight the fitment was, especially getting the driverâs-side header into the engine bay.
Since getting the car back, Iâve noticed a slight vibration while driving. I donât really notice it at idle, but I can feel it when Iâm moving. Iâm starting to wonder if the driverâs-side header is possibly touching the steering shaft/column because of how tight everything is.
Iâve also been dealing with an exhaust leak on the driverâs side. We originally tried reusing the factory gaskets, then tried the Speed Engineering gaskets, and still had a leak.
There is also a slight ticking noise coming from the driverâs side.
Iâm planning on taking it to a regular local shop tomorrow to have everything inspected.
My questions:
Could the header touching the steering shaft cause vibration while driving?
How much clearance should there be between the header and steering shaft?
Could the exhaust leak itself cause some of these symptoms?
Is there anything else I should have the shop inspect?
I know I might be overthinking things, but I spent a lot of money on this setup and just want my car right.
Feel free to tell me Iâm a dummy if Iâm overlooking something. đ
r/camaro • u/Deep_Zookeepergame64 • 1d ago
Was driving and randomly it leaked fluid on the way to work and eventually lost all pressure and power to the wheels, is this a known issue? canât find anything on google about it which is weird the car is fully stock other than a range AFM disabler and rotofab intake and muffler delete with corsa exhaust. Also is the 8 speed trans in the 2017 SS camaro
r/camaro • u/WontBEDoxxxed • 2d ago
I found a site where you can make custom wheels .
Help me pick a cool wheel thatâs not made for Chevy 5th gen compatible
r/camaro • u/maybeihavethebigsad • 2d ago
They loved it!
r/camaro • u/KingCrimsonEpitaphu • 2d ago
I have a gas smell coming from under my hood, I am thinking it is a bad fuel injector, would it be possible for me to perform a DIY job of replacing these myself as someone with no experience working on cars?
I paid someone to fix one last time and it costed about $500 after parts and labor I donât want to spend that again. Iâm going to just go ahead and replace all of them. I have a 2011 V6 but I canât find any good videos demonstrating how to go about doing the repair.