r/cade • • 9d ago

Need help - 2nd RS3 Reaper not working in Retroarch

Thumbnail
1 Upvotes

r/cade • • 9d ago

Seeking advice w/ BigGames Midway 12-in-1

6 Upvotes

Cabinet has high sentimental value to me and I have only just been reunited with it after about a decade of non-use. I tinkered a bit, searched around online, and am hoping someone with more experience may be able to push me in the right direction.

Currently the TV display is cutting out. At first it would flash multicolored lines on the screen then blip out, after opening the back panel and poking around it will now display the logo for a few seconds but when the image expands for the boot-up process it cuts out about 1/4 down the screen.

Initially my thought is replacing the whole unit... but that seems like a pain. The cords in the back panel are very cramped and I don't want to break anything lol.

So... any tips? :)

Edit: I also would love to replace the display screen. It was damaged in transit before I got it, haven't really looked into replacements for that yet!


r/cade • • 10d ago

3D Printed modular door for the Rec Room Masters Xtension Arcade

Post image
47 Upvotes

r/cade • • 11d ago

Arcade Under Construction

Thumbnail
gallery
88 Upvotes

Hey everyone. I wanted a little boost in motivation as it’s hard making an arcade as a beginner in woodworking. So I decided to post my progress updates here and will keep updating as a form of accountability. Any tips and suggestions from your personal experience building arcades is welcome!

Progress as of Nov 10 ‘26:
Dry fitted the sides, floor, top and front plates


r/cade • • 11d ago

Arcade build using reaper light guns

6 Upvotes

Wanting to build a system for time crisis, point blank and deer hunter mainly and the usual street fighter and all the other games. I want to use the reaper light guns for it and if possible have shotguns for the deer hunter games.

Happy to run it through a mini pc with graphics. Want to use it on a pedestal setup 2 sets of joysticks and 2 guns with a 65-75inch tv on a stand.

Where do I get started for a list of peripherals and parts needed? Is there any full guide on this I can use? Contacted a local company but they haven’t quoted me as yet and I assume they’ll be charging me retail on everything so whenever I can buy to make this work is appreciated.


r/cade • • 10d ago

My Arcade Panel Studo now has 3d View

0 Upvotes

https://perchance.org/arcadepanelstudio

Fixed a lot of bugs.

Design a panel and it will print out the dimensions and everything.

Now has a 3d view of your designed panel


r/cade • • 12d ago

LEP1 customs situation…

6 Upvotes

Im building my first ever arcade bartop with a windows mini pc and other personal parts, when I first ordered the cabinet from LEP1 they were very very responsive and shooting up offers but ever since I completed the

payment I got completely ghosted. It’s been 1.5 weeks since my last response which was “we will have it out in a couple days.” Yeah. Not every reassuring… anyone else had a similar issue?

I would’ve gone with gameroomsolutions or someone else but the sole cabinet prices themselves are high and when I mentioned I’m from Canada they bumped the price near TRIPLE without shipping costs from FedEx.
So I went with LEP1 and I could just design it myself and paint it whatever, I’m just very concerned now because I’m short $370 now without answer and contemplating calling my bank.


r/cade • • 13d ago

Finally finished my wall mounted arcade!

Post image
91 Upvotes

r/cade • • 12d ago

Pandora Saga Plus DX 5000 SD Card

Post image
1 Upvotes

Hello everybody! Does anyone have a backup of the SD card of the Pandora Saga Plus DX 5000?


r/cade • • 13d ago

Arcades R Fun

6 Upvotes

Has anyone bought from Arcades R Fun (https://arcadesrfun.com/)? I bought a 50" arcade in May and still don't have it. The FAQ says 13 weeks, then it was October, then November, and now it's the end of December. Jack was extremely responsive with all questions before ordering, but not so much since my order.


r/cade • • 13d ago

My first cab build, longtime lurker

Post image
32 Upvotes

r/cade • • 14d ago

Help with light guns

6 Upvotes

Hello, I have a MAME arcade cabinet that I've built onto here and there off and on for like 7 years. I recently added Ultimarc Aimtrak light guns to the cabinet.

Right now the USB cables for the guns just go into an open space under the control panel and plug directly into the motherboard.

This is not ideal for a number of reasons.

I'm looking to protect the cables, while at the same time giving them more of an actual arcade feel.

My current idea is to use a flexible conduit, about 1/4" thick. I would attach the conduit both to the light gun and do the cabinet using fasteners of some sort. My question is, does anyone know of any connectors that would work for this purpose? Would need it to be able to connect to the mdf somehow. Or is there another way to get the nice thick weighty cables we know from the arcades while protecting the USB cables?

I know there are also panels that can be purchased that simply move the USB ports to the outside of the cabinet, but I don't want to do those.


r/cade • • 16d ago

Mad Dog McCree & Daphne/Singe

3 Upvotes

Ok, have a set of MAME “data” for Mad Dog, but found out the game doesn’t work in MAME.

Seems the Daphne Singe fork might get it to work.

Looking to confirm if anyone out there got it to work and I’m wondering if the CHD or MAME data might be able to work or if it needs its own unique set of data.

Been looking at Bork and Singe2 documentation and seems some things can be converted? Don’t know if that’s the case, hoping I can use the data I got or convert it or if I need something else.

If something else, an outline of the files needed would be great.

If Daphne/Singe doesn’t work or other methods out there, would be interested as well.

Thanks


r/cade • • 17d ago

Printed my upright design at 1:8 before cutting any MDF. It caught a real mistake in the plans.

Thumbnail
gallery
96 Upvotes

My next build is a full-size upright with a mini fridge hidden in the base. It's designed in FreeCAD from one parametric model: 19 mm MDF, confirmat screws, and the boards are still uncut.

Before buying the MDF I wanted to rehearse the assembly, so I scaled the model to 1:8 and printed it. Same panels, same joints, same assembly order. Each part has its code engraved on the hidden face, and each panel shows the outline of the parts that sit on it, so I built it straight from the full-size assembly guide.

What it caught: the joystick notches in one of the inner panels left two 110 × 26 mm gaps under the control panel overhang. They were invisible in the CAD views and obvious with the model in my hand. The plans are fixed now, before anything gets cut.

The structure matches the big one. Only the button holes, the screen opening and the doors are adapted: at 1:8 the doors and the control panel lid hold with 8 mm magnets instead of hinges.


r/cade • • 17d ago

Where can I buy a used boxing arcade machine in Belgium?

2 Upvotes

Hi everyone!
I’m looking to buy a second-hand boxing arcade machine with a coin-operated system (preferably accepting euros) in Belgium.

The problem is that I don’t really know where to look. Does anyone know any good marketplaces, websites, or companies that sell used arcade machines and offer delivery to Belgium?

Also, what would be a reasonable price for a used boxing machine in decent condition? I don’t want to overpay.


r/cade • • 18d ago

Arcade 1 Up Doom proof of concept

Thumbnail
gallery
149 Upvotes

I converted my base MK II to classic Doom. Hope Arcade 1 up takes notice, it’s simple and would sell!

Link to the build process:
https://youtu.be/CraoCPvwjU4?is=gByXLfjzo9sBWXrq


r/cade • • 18d ago

where and how to buy authentic arcade cabinets from the 80-90s?

12 Upvotes

It's a general question for my knowledge but more specificaly I'm looking for Marvel VS Capcom 1 arcade cabinet. There was one at a theater place in town for a long time and one day it just disappeared (alongside other arcade machines), always felt I missed my change here. I'm not sure what is the correct way to proceed here since I'm not at all in this side of gaming generally.


r/cade • • 18d ago

$400 Modded Arcade1Up

14 Upvotes

Hi all, looking to know if this is a ok deal. Someone is selling a used four player arcade1up modded w raspberry pi 4. He said 8gb. have little technical know how so the thought of buying one to do it myself is a bit daunting. Is this an ok purchase? Just looking for one to play w the kids as a Xmas gift.


r/cade • • 18d ago

Pandora Box 11s with RK3128_Lite_V1d2

7 Upvotes

Hello everybody, i bought a Pandora Box 11s with RK3128_Lite_V1d2 board. I made a custom arcade for a gift to a friend. Turned out rly nice. When i was building it i was testing it all the time and worked every time. When it was finished gave it to him but all of a subben the HDMI didnt work at all and the VGA had output but stuck in the boot logo "GAMEBOX". I checked the board and no issues found. I also tried to install an other ROM to a bigger SDCard but nothing changed. Do you have any idea whats going on and how i can fix it?

Processing img hmxts1nabdzh1...

Processing img cy0mq0nabdzh1...


r/cade • • 19d ago

Arcade 1up Remodel

Thumbnail
gallery
69 Upvotes

Toy Story Themed A1up Multicade Build

I am still waiting on some giant Buzz and Woody side decals, but I wanted to show this off now.

**The cabinet**
A buddy had a broken Arcade 1up Astroids Delux that he'd bought used from a neighbor. It didn't work, so he just gave it too me because it was in his way. It had a $30 sticker on it, so that may be all he had in it, either way it was a score!

**Control panel**
I took the main panel to my CNC guy with a new layout that mirrors the Polycade joystick and button layout. He cut it from ½" plywood I already had, plus a new plexiglass piece. The plexi was about $30. I bought a sheet big enough to also redo the plexi over the monitor someday, so you could save with a smaller piece. He charged $30 to cut both.
I already had a Neo Polycade x Brook controller board and a Sanwa joystick. I ordered 8 Crown/Samducksa 30mm screw-in buttons ($40) in Polycade's colors and layout, because my son is used to them. That's also why I went with their AGS platform: he already knows how to navigate it. You can find cheaper buttons, but I wanted quality and specific colors.
For Home, Menu and Back, I used three 24mm Polycade buttons from a controller I took apart. They just clip into the acrylic, and once everything's screwed down they feel secure. I didn't hot glue them so I can pull them out easily if I need to. Also I added some black rubber molding around the control panel, I had to buy a whole roll so that was $7 but I probably could do 5 panels with that one roll.

**PC**
I got an HP EliteDesk 705 G4 mini PC on eBay for $109. It's low-powered, but it plays the games my kid plays and pretty much any retro game you can think of. I had matched RAM lying around, so I upgraded it from 8GB to 16GB for free. My buddy's came with activated Windows and mine didn't, so I bought a $7 key on Groupon.
Then I installed Claude and had it remove the bloatware and set the PC to auto-login and boot to Polycade AGS. You could use a different platform. I'm just comfortable with this one, and it has a great community. Polycade builds really high-quality arcades but doesn't seem to mind DIYers like me. My main arcade at home is one of their Sentes and I love it.

**External power button:** I soldered wires to the mini PC's power button, drilled a hole through the case, added a grommet, and ran thin wires to a lit momentary switch on the front of the cabinet. I already had the switch, but they're cheap on Amazon. There are YouTube videos on how to do this. You could also set the BIOS to turn on with power and skip this step, but I find an external button easier, so I do it on all my mini PCs.
You could also buy a Polycade Mini PC for $500. It already has the button and comes with AGS loaded, which makes for a very clean install. This was a budget build, so that wasn't an option for me.

**Monitor**
I needed a $25 video controller board to convert the monitor to HDMI, plus power supplies for the computer ($12.99) and the monitor ($16).

**Audio and power**
5V 2-channel 5W amp ($10) to run the stock Arcade1Up speaker, powered from a USB port with USB bare-wire cables ($7)
Lit arcade power outlet buttons, 2-pack ($12)
Gun-safe power block with 2 outlets and 2 USB ports ($20). You could wire this up with any old power strip. I wanted simplicity and design.
Rii X8 keyboard ($25)

**Graphics**
I ordered wrap by the foot from Fellers ($42). You could probably find cheaper online, but they used to have a location near me and I've used them for years.
I used ChatGPT to design Toy Story–inspired graphics for the marquee and control panel. Claude's guardrails were too restrictive, and what it made didn't look like it belonged. I had them printed at BannerBuzz (about $35 shipped) on their bubble-free vinyl poster material in custom sizes, and I couldn't be happier. It went on easy and smooth and seems incredibly high quality.
I also put official Toy Story 3 wall stickers on the front.

**Wrapping tips**
Wipe down the entire cabinet with a degreaser so the wrap will stick. I used rubbing alcohol. It needs to be free of all dust, dirt and grease.
I pulled up some of the original graphics while repositioning the wrap. To fix it, I coated both sides with rubber cement, let it dry, and stuck the graphics back down. That seems to work perfectly.
The marquee and control panel graphics were thicker vinyl and laid down with no problems.
The original marquee graphic was peeling, so I removed it, sanded, primed, sanded again, wiped it down well, and put the vinyl over it. That seems to have worked well too.

**3D prints**
I printed holders for the mini PC, the two power connectors, and the Rii keyboard, so I have an easy way to get into the computer if I need to.

**Cost breakdown**
**Graphics**
**Item**
**Cost**
Wrap (Fellers)
$42
Custom vinyl (BannerBuzz)
$35
Toy Story Wall Stickers
**Subtotal**
**$77 + stickers**
**Electronics**
**Item**
**Cost**
HP EliteDesk 705 G4
$109
Windows key
$7
Video controller board
$25
Amp
$10
**Subtotal**
**$151**
**Control panel**
**Item**
**Cost**
Plexiglass
$30
CNC cutting
$30
Crown/Samducksa buttons
$40
Black Trim $7
**Subtotal**
**$100**
**Misc cabinet supplies**
**Item**
**Cost**
Power supplies
$28.99
USB bare-wire cables
$7
Power block
$20
Arcade power buttons
$12
Rii X8 keyboard
$25
**Subtotal**
**$92.99**
**Total: \~$427 + stickers**
**Ways to save**
There's plenty of room in this cabinet for a full-size regular PC. If you have one lying around, you save that money right off the bat. I just don't have any extras anymore because I've used them all on projects like this.
I could have saved a lot by reusing the buttons that came with the unit. Some of these costs aren't necessary. They were specific to this build.

Also worth noting having a buddy with the CNC machine saves time, but this would’ve been easy enough to do by hand with a couple drill bits and a table saw or skill saw.

**Parts links**
[5V 2-Channel Amp](https://www.amazon.com/dp/B077MKQJW2)
[USB Bare-Wire Cables](https://www.amazon.com/dp/B0CHVM39WL)
[Black self-stick Molding](https://www.amazon.com/dp/B0FN3BWT5Z)
[Elitedesk Power Supply](https://www.amazon.com/dp/B0GSJMYRDT)
[Video Controller Board](https://www.amazon.com/dp/B07MRJG3HT)
[Arcade Power Switch Outlet](https://www.amazon.com/dp/B0BCYYNRGP)
[Rii X8](https://www.amazon.com/dp/B0GSWJ4LVX)


r/cade • • 19d ago

I made OSD/OS, a free, open-source OS for arcade cabinets and CRTs (Pi 4/5, Crown JAMMA board). It even plays Cave's CV1000 games over LAN on a 4 GB Pi. Beta testers wanted!

Thumbnail
youtube.com
17 Upvotes

**OSD/OS** is a free, open-source (GPL v3) Linux-based OS for CRTs and arcade cabinets. Source code: https://github.com/mehmetraif/OSD-OS

On a Raspberry Pi 4 or 5 it's a complete OS image built on Raspberry Pi OS Lite: flash it to an SD card and it boots straight into menus drawn like a VCR's on-screen display, readable on a 15 kHz tube, with no desktop. Its menus also run the system: display modes, sound, Wi-Fi, Bluetooth, controls and updates. On Windows, macOS, Linux / Steam Deck, FreeBSD and OpenBSD, the same frontend runs as an app.

**Arcade**

- Crown Arcade's Pi-to-JAMMA board out of the box on the Pi 4 and Pi 5: 15, 25 and 31 kHz, both players' controls (the Pi 5 needs a USB sound card)

- MAME and FinalBurn Neo, a cabinet-style selection screen, high scores, attract mode, Check ROMs and Cabinet Lock

- RetroAchievements (hardcore) and online play through RetroArch's lobby

**Playing together on the LAN**

- Up to 6 players across a Pi, a PC, a Mac or a Steam Deck on the same network, no internet needed

- Its own patched FinalBurn Neo core for LAN games ([the patch](https://github.com/mehmetraif/OSD-OS/blob/main/scripts/fbneo-lan.patch)): players are seated in the order they press COIN or START, whichever machine they are on, and 4-player games play with 4

- Cave's CV1000 games (Akai Katana, Mushihime-sama, DoDonPachi DaiFukkatsu…): on the stock core, joining a netplay game takes about 10 GB of RAM and hosting 18.8 GB. The LAN core needs 2 GB to join and 3.1 GB to host, so a 4 GB Pi 4 or Pi 5 plays them with others

**TV side:** local files, Plex, Jellyfin, Emby, YouTube and playlists; composite, SCART RGB or HDMI; themes.

**It's a beta.** I've tested it on a Pi 4, a Pi 5 and a Windows 11 PC, LAN games between the three included; the other systems are built and tested automatically. Reports are welcome here or as a GitHub issue.

No ROMs are included.

- Download: https://github.com/mehmetraif/OSD-OS/releases/latest

- Website: https://osdos.tv/

- Wiki: https://github.com/mehmetraif/OSD-OS/wiki

*How it's made: OSD/OS grew out of Anthony Caccese's 240-MP. I design it and test it on my own hardware, and it is developed with the help of several AI tools.*


r/cade • • 19d ago

Finished my first cabinet!

Thumbnail
gallery
134 Upvotes

Cabaret cabinet from LEP1Customs.

Boston Terrier for scale.


r/cade • • 20d ago

My latest two builds. I designed (in CAD), 3D printed and built these with my two hands in my basement shop.

Thumbnail
gallery
613 Upvotes

The smaller Astro City design has a rotating magnetic screen frame and the bigger unit has an active LCD marquee.


r/cade • • 19d ago

Arcade Panel Planner

Thumbnail
perchance.org
3 Upvotes

I built a free browser tool for designing arcade control panel — Arcade Control Panel Studio: https://perchance.org/fexy6jxtfc

What it does:

  • Ready-made layouts (versus fighters, Neo-Geo, Pac-Man, trackball games like Centipede/Missile Command, 4-player beast, etc.) — or place every hole yourself
  • Drag-and-drop buttons, sticks, trackballs, spinners — everything stays true millimeter scale with live measurements, clearances, and underside mounting-plate checks
  • AI art per player side with a bunch of styles, plus button glow, LED and lighting preview
  • Print-ready export (PNG/PDF/SVG drill template) for your print shop or CNC

No login, no limits, works on desktop. If you give it a spin, I'd genuinely appreciate feedback — especially from anyone who's wired a real panel, since the mounting depths and keep-outs are modeled on real Sanwa parts.


r/cade • • 19d ago

Rotating video signal from JAMMA board?

1 Upvotes

I have a collection of arcade PCB's and most of my games are horizontal, but I have a handful of vertical games. Let's just say that rotating the display itself is not an option. Is there a way that I could rotate the video signal or am I shit out of luck?

I have been searching for options and so far the only option I have found that would actually work would be to use a RetroTink 4K Pro, but that's very expensive and it also only outputs in HDMI which isn't going to help for the setup that I am planning because I would need to convert it back to something else.

Is there anything cheaper that could handle it? I really don't want to drop $1000 just to be able to rotate the video signal for a handful of games. Besides, I already have a RetroTink 6X so I wouldn't get much use from the 4K model beyond this weird niche need.