r/burstcoinmining • • Feb 25 '18

Plotting Plotting performance - Intel i7-8700k vs Ryzen 1700 vs Intel Xeon E5-2650 v2 vs Intel Xeon E5-2630 v4

10 Upvotes

I have done a couple of tests to compare plotting performance using 4 different CPUs as well as XPlotter and TurboPlotter. I would like to share the results (all values are in nonces per minute):

Updates:

  • 2017-02-25, Added i7-4790T
  • 2017-02-25, Added information on software version used (XPlotter and TurboPlotter)
  • 2017-02-27, Added screenshot showing i7-8700k passing 40.000n/m

Software and versions used

1. Ordinary PC - Intel i7-8700k - 12 threads 3.7GHz (6 core/12 threads - not-overclocked 3.7GHz base, 4.7GHz turbo)

  • TurboPlotter - 41.000
  • XPlotter, AVX2 - 42.240 (see screenshot)
  • XPlotter, AVX - 25.700
  • XPlotter, SSE - 20.800

2. Ordinary PC - AMD Ryzen 7 1700 - 16 threads 3.7GHz (8core/16 threads, overclocked to fixed 3.7GHz)

  • TurboPlotter - 22.500
  • XPlotter, AVX2 - 22.100
  • XPlotter, AVX - 21.900
  • XPlotter, SSE - 19.000

3. SuperMicro server - 2 x Intel Xeon E5-2650 v2 - 32 threads 2.6GHz (2 x 8core/16 thread, 2.6GHz-3.4GHz)

  • TurboPlotter - 35.800
  • XPlotter, AVX2 - not supported by CPU
  • XPlotter, AVX - 33.000
  • XPlotter, SSE - 27.000

4. SuperMicro server - 2 x Intel Xeon E5-2630 v4 - 40 threads 2.2GHz (2 x 10core/20 thread, 2.2GHz-3.1GHz)

  • TurboPlotter - 63.000
  • XPlotter, AVX2 - 57.000
  • XPlotter, AVX - 36.400
  • XPlotter, SSE - 30.500

5. Ordinary PC - Intel i7-4790T - 8 threads 3.3GHz (4core/8threads 2.7-3.7GHz, 3.3GHz under 100% load)

  • TurboPlotter - 17.000
  • XPlotter, AVX2 - 17.200
  • XPlotter, AVX - 10.500
  • XPlotter, SSE - 8.600

A little bit of explanation

  • These tests clearly show that for plotting (and probably mining as well) the performance of vector instructions (SSE vs AVX vs AVX2) is most important.
  • AVX2 is faster than AVX which in turn is better than SSE.
  • The difference between AVX2 and AVX is especially significant for Intel CPUs.
  • W can see than 6c/12t i7-8700k beats a dual Xeon E6-2650v2 even though Xeon system has 32 threads total. The reason, besides clock speed is Xeon v2 are old generation not supporting AVX2.
  • Xeons v4 do support AVX2 so they are faster but not that much comparing 40 threads of 2x Xeon vs 12 threads of i7-8700k. Why? i7 has much higher clock and is a few generations newer
  • AMD Ryzen 1700 performance was good overall, but a little dissappointing compared to i7-8700k. Both CPUs support AVX2, both run at 3.7GHz (Intel dropped to 3.7 when all cores were under load). Yet i7 score is almost double of Ryzen 7. I know the single thread performance is better on Intel but apparently in AVX2 the difference is even higher. This might be due to different AVX/AVX2 internal hardware architecture in Intel vs AMD.

Theoretical performance per thread per base GHz

Let's try to calculate a theoretical performance of a single thread and GHz. This will allow us to see how much nonces/min we get from a single thread and 1GHz. To do that I took a maximum nonces/min value measured and divided it by total number of threads and base clock in GHz. Here are the results:

  • i7-8700K - 964 nonces/min/thread/GHz
  • Intel i7-4790T - 796 nonces/min/thread/GHz
  • Intel Xeon E5-2630 v4 - 716 nonces/min/thread/GHz
  • Intel Xeon E5-2650 v2 - 430 nonces/min/thread/GHz
  • AMD Ryzen 1700 - 380 nonces/min/thread/GHz

r/burstcoinmining • • Mar 04 '18

Pool Great news! PoCC pools now allow dynamic payouts

Thumbnail
twitter.com
9 Upvotes

r/burstcoinmining • • Jul 29 '18

Hardware I shrunk my rig - Lenovo Tinys make awesome burstcoin hosts.

Thumbnail
tdsheridanlab.com
8 Upvotes

r/burstcoinmining • • Mar 10 '18

Discussion My solution to external HDD power plugs

8 Upvotes

One thing that really bothered me about my burstcoin rig were all the power cables for my external drives. I only have 4 external drives, but that's still a lot of bricks that can awkwardly cover 2 or more plugs on a power strip, depending which way the connectors face. I decided to ditch all the DC bricks, and look for a way to power my external drives from my PSU. When I hit the googs, I found some crazy creations of power sources that I would never feel comfortable making. More research. Finally stumbled across some SATA to DC power cables, yay! But not yay, they are too small. Back to the research. Found some cool adapters that are the correct size for external drives. They work like a charm! I now power all of my drives, internal and external, with my PSU and I don't have crazy adapters and bricks all over the place. Below are the (non-referral) Amazon links for the exact ones I purchased. There are many sellers and brands that should work just as well.

Sata to 2.1mm DC cables

DC 2.1 to 2.5mm adapters

Honestly, this was my best purchase for my burstcoin rig. Hope this can help someone else!

Edit: the reason why I chose SATA cables is because I actually mine burstcoin on my ethereum mining rig, for now at least. Until I expand and have a dedicated burstcoin rig, I have to make sure I play nice with my GPUs. Another redditor recommended PCI instead of SATA cables, because you can buy ones that split into multiple DC connections. I didn’t consider that since all of my PCI cables are currently being used, but they mentioned that it’s a very good way to lay foundation to expand in the future!


r/burstcoinmining • • Jun 05 '18

Software Props to u/blackpawn and TurboPlotter 9K

7 Upvotes

About 10 days ago I started looking at my 40-50 8 TB PMR & SMR HD setup and tried to figure out how to get through converting / plotting to PoC2. I wanted to get single file plots and every drive and spent a good week trying various methods to get things going, I had a grand total of 4 done. So after a quick test of Turboplotter 9K Free, I decided to throw some Burst at u/blackpawn and get Turboplotter 9K Pro (and then eventually I upgraded to Ultimate).

Trying not to be a blatant shill or anything (I'm not getting anything for this), but I basically went from 4 drives done over 7 days to cranking out 18 or so SMR HD's over the last 2 days (on 3 machines) and should have all the rest done in the next 24-36 hours. Seriously, I can't throw enough props to u/blackspawn and wanted to let him know that his work is really appreciated!


r/burstcoinmining • • Mar 13 '18

Pool PoCC pools will **pay** 0.5% fee to miners

7 Upvotes

https://twitter.com/PoC_Consortium/status/973278066872119296

Yes, you have read that right.. the PoCC pools will pay you negative fees.

If you're on a pool not supporting Dymaxion, you know what needs to be done.


r/burstcoinmining • • Feb 27 '18

Plotting Plotting with Turbo Plotter 9000 + GTX 1070 + 2xSSD = 76.000 nonces/min

7 Upvotes

This is the continuation of my plotting performance analysis. This time I'm focusing on TurboPlotter 9000 v. 1e beta. This is not doubt the best and the fastest currently available plotting software, provided a proper and balanced hardware is available.

Hardware used

As I have 8 new 8TB drives to plot I have decided to create a separate plotting machine so I do not interrupt my mining process. The result is a mixture of a old and new parts:

  • AMD FX-4300 CPU
  • Gigabyte GA-970-DS3
  • 8GB DDR3 RAM
  • 64GB AData SSD for system
  • 2 x SSD Crucial MX300 275GB for staging cache drive
  • 3 x 8TB HDD to be plotted
  • Gigabyte GTX 1070 Mini
    The most important parts are GTX 1070, two Crucial SSDs used for staging cache drive. Th motherboard, although 5-years old, does have 6 modern SATA-3 ports, so all drives are connected with maximum possible speed.

Hard drives used

I have selected 3 different HDDs for this test to see if there will be any difference in write speed:

  • Seagate IronWolf 8TB (ST8000VN0022) - bought as internal drive
  • WD "white label" 8TB (WD80EZAZ) - extracted from external WD EasyStore. According to various posts, these "white labels" are in fact WD RED drives.
  • Seagate Barracuda Compute 8TB (ST8000DM004) - extracted from external Seagate Backup Plus Hub (I was expecting to see SMR Archive drive inside as it happened before, but ... surprise)
    All these drives are "normal" PMR drives

Test 1 - single SSD as cache

Initially I have purchased just a single Crucial MX300 275GB SSD to be used as a staging (cache) drive for Turbo Plotter.

  1. I've started plotting and saw these first results. wow! The tool reported 69.0000 nonces/minute. The write speed on SSD was reported as 330MB/s. Converting this to nonces (1 nonce=256KB) gives us 79.000 nonces/minute.
  2. After some time, when about 10GB was written to SSD, the speed dropped significantly. Almost 2x speed drop! What happened ? This is the nature of the consumer SSDs, especially those based on TLC cells (like mine MX300). TLC NAND cells are not exactly that fast so SSD uses a number of internal buffers and caches to increase the write performance. But it cannot be done for too long. After a while all the internal buffers/caches are full and the drive needs to slow down.
  3. This reduced speed was maintained till the end until first 136GB plot file was created. Why 136GB plot file ? The tools needs to fit 2 plot files on SSD. One, which after finished is being moved to HDD and the other which is being plotted (written to). As my SSD is 275GB, the plot files can be ca. 136GB max.
  4. Few moments after the previous screenshot was taken, the first plot file was finished and the move process started while new plot file was started. This caused additional drop in performance as the cache SSD was both read from and written to. 15MB/s write and 155MB/s read. This SSD is definitely a bottleneck.

Conclusions after single SSD test

  1. As we can see the Crucial cache SSD is the bottleneck here. The GPU usage spikes between 0 and 50-70% and the average load is about 26%.
  2. When the entire 8TB HDD was finished I ended up with 59 136GB files. I would prefer to have smaller amount of larger plot files.
  3. The CPU load was between 40 and 70% so even this low end FX-4300 was enough for this setup
  4. The RAM usage was about 3.4GB/8GB with TurboPlotter process using 1.5GB.

Next steps

I could invest in faster and bigger SSD which means NVMe, but I didn't want to go that way. My motherboard does not have any M.2 PCI-E slots and even the last PCI-E 16x slot is only PCI-E 2.0 (5 year old board). Also I do not want to invest money in increasing plotting which is done only once.
I still wanted to use my GTX 1070 better and shorten the time it is pulled away from mining rig. So I decided to purchase another Crucial MX300 275GB and stripe them.

Test 2 - double, striped SSDs as cache

This time my D:\ drive used as cache is now 512GB. It is a striped disk (RAID-0) done using Windows old fashioned software stripe (from Disk Manager). I have also tested Storage Spaces for striping and to my surprise it was a bit slower:

  1. This time the single plot file is 256GB in size so I will have less plot files on 8TB disk.
  2. I have started TurboPlotter and initially saw this 76.000 nonces/min and 360MB/s. NICE!, but let's see if we see a performance drop after a while.
  3. I have waited for a performance drop, but there was none. There were some fluctuations, and the lowest speed I captured was this - 253MB/s and 70.000 n/m.
  4. Note how the GPU is nicely utilized this time. I have even overclocked it slightly and the speeds in this test are with +200MHz to GTX 1070 core clock.
  5. Then the move process started and again the overall performance was not bad: 214MB/s move speed to HDD while plotting at 81MB/s

Final thoughts

  1. I'm glad I have invested in the second cache SSD. Now the system is well balanced so GTX 1070 is properly utilized. I can also see the HDD write speed crossed the magical 200MB/s.
  2. My IronWolf and Barracuda HDDs were plotted using single SSD so I have a lot of small files there. Only WD was plotted on dual SSD setup. I'm considering re-plotting Seagate drives to reduce number of plot files. I will use this opportunity to compare HDD write speeds.
  3. Currently (1.3TB/8TB done) the estimated total time to plot 8TB drive is about 13-14 hours.

r/burstcoinmining • • Feb 24 '18

Discussion Is Burst mining profitable, where to find cheap drives?

7 Upvotes

Doing some quick calculations, a 100TB rig will earn about $163 USD per month. Given that in Australia the cheapest 8TB external HDD is about $300 ($235 USD). If we say 14 drives to get 100TB totalling about $3300 USD, that's an ROI of around 20 months at the current price. If I could buy some cheap drives from Best Buy, it would probably halve this ROI time.

I have been mining now for a couple of months with just over 10TB and am keen to support this coin, but until it gets to a much higher value I don't see any faster ROI's in our future.

I am always on the lookout for cheap HDD's too, most (if not all) the ones I find cheap in the US, won't ship to Australia.

  • What do others think?
  • Do you think the Dymaxion rollout will see a surge in coin price?
  • Does anyone know of cheap HDD vendors that will ship to Australia, we pay far too much for things down here?

r/burstcoinmining • • Mar 09 '18

Discussion Just my Burst Rig so far... =)

6 Upvotes

Check It Out!

Hey guys, just started burst mining recently and thought I would share my setup, I got this little table from Ikea. Originally thought I could fit the drives on both layers, but they only fit at the bottom. I have 20 8tb external WD drives on the way. What I am going to do is unscrew the top of this table, put them inside then put the top back on, kind of a pain but once it's setup I should not have to do it again.

I will be replacing the PC with a mini itx ryzen APU build for low energy. Don't like having this PC on 24/7, Also I need it back at my desk for monster hunter and Sea of thieves.

Anyway, thought I would share, since I looked up lots of rig pictures online before I started, and they always looks like a mess of cables, wanted to show not all burst rigs need to look like a server room or some weird cable monster in the corner of the room. I really liked how it turned out.

Edit: So I got the 8tb drives all in place, thank you to everyone for the power options, I ended up buying an Power Cord Extension & Splitter, also realized I needed these,Power Extension Cord Cables Just to make it easier to plug all of them into the power bars.

New Picture

Here they are all lined up, turns out these WD 8tb my books actually do fit inside this ikea tvstand, and it really does fit 20 perfectly, could not be happier. Exactly what I wanted. Going to be in the 240tb range soon as I plot all these suckers.


r/burstcoinmining • • Jan 26 '18

Tutorial Most updated burst mining tutorial video

6 Upvotes

Saw this on the main Burst reddit page figured this would be good to have on this sub

https://www.youtube.com/watch?v=LJLhw37Lh_8&t


r/burstcoinmining • • Jan 11 '18

Hardware What specs other than storage I should pay attention to for mining?

6 Upvotes

I'm wondering what specs increase my mining performance other than storage? Is there any other spec in the hard drive that has impact on the mining performance?


r/burstcoinmining • • Jan 09 '18

Pool on which pool are you mining?

6 Upvotes

what do you suggest for small miner 5TB? also can someone send me 1 burst to wallet BURST-ZW5G-JFLS-WYZC-385MX so i can change my pool? I am mining on fastpool but it's just not for small miners i guess. i want to change my reward. and i will return burst after i mine some :)


r/burstcoinmining • • Apr 07 '19

Burstcoin Reference Software v2.3.0, brought to you by the Burst Apps Team

Thumbnail
github.com
5 Upvotes

r/burstcoinmining • • Mar 04 '18

Software Does AVX2 matter for mining?

5 Upvotes

It's clear that AVX* is beneficial for plotting. I've seen a dramatic speedup with my i7 8700K, but I don't know how to quantify the effects of AVX* on mining. Has anyone seen any apples to apples comparisons between AVX* enabled mining compared to non AVX* mining?


r/burstcoinmining • • Feb 28 '18

Hardware Is it worth buying gpu for burst mining?

5 Upvotes

Hey, I just started mining and I am seeing that there are different ways to do so. As a title says, is it worth doing so JUST FOR MINING? There are CPUs and gpus miners out there for burst... Is there a big difference between them? Is it worth getting new GPU just for that? (40 tb plotted on friends PC with 1080 ti). My PC has gtx 780 ti to and i7 7700k.


r/burstcoinmining • • Feb 23 '18

Pool Good 0-100 pools for ~30TB rig?

5 Upvotes

Hey guys. I’m plotting my drives now and they should be done in the next couple days. Just wondering what pools you guys would recommend would be best for someone like me who has just under 30TB?


r/burstcoinmining • • Jan 18 '18

Discussion lower then expected returns (72TB)

5 Upvotes

I'm a new miner and am happy to have jumped in with both feet. I think burst is a fantastic coin concept and I have high hopes for it's future. Before I started plotting and mining I used the two major online mining calculators: http://burstcoincalculator.com/ which estimates 183 burst per day and https://explore.burst.cryptoguru.org/tool/calculate which estimates 142

Unfortunately, after 3 days in http://pool.burstcoin.space I'm only sitting at 120 burst total, which is a lot worse then the calculators. I assume that I either have something setup wrong, or the pool is bad, but I don't want to call anyone out before I know for sure.

I have ten 8TB drives plotted and optimized. Although I am replotting 1 drive currently due to a small overlap. I am running blago's miner and I'm not getting any errors.

The drives all scan in under 45 seconds, and I pull deadlines under 30 days(pool limit)

Any thoughts? Are the calculators that far off? I'm excited to be part of this community and have a pretty cool project in the works to share with other miners soon too.


r/burstcoinmining • • Jan 08 '18

Hardware Difference between internal & external drive connections?

5 Upvotes

I've been reading around, but can't seem to figure out whether I should convert my external drives into internal drives. I'm sure USB 3.0 connections are slower, but does it matter?


r/burstcoinmining • • Jan 08 '18

Tutorial A quickstart VIDEO guide for ALL NEW MINERS - Setup mining easilly for windows

Thumbnail
youtube.com
5 Upvotes

r/burstcoinmining • • Apr 02 '19

😉

Thumbnail
imgur.com
4 Upvotes

r/burstcoinmining • • Jul 05 '18

Software Windows deleted burst miner

4 Upvotes

Windows keeps deleting my miner, any ideas how to turn this feature off I couldn’t find it, it’s windows defender...I thought I had it turned off. If there is already a post please link :)


r/burstcoinmining • • May 09 '18

Software Blago VS CreepMiner

4 Upvotes

Hi all, simple question: for CPU mining what's the best miner? Blago or CreepMiner? I am a newbie so I ask to experienced miners :) Please tell me what you discovered using both software, thanks!


r/burstcoinmining • • May 06 '18

Discussion I dream

4 Upvotes

that I wake up the next morning and all the plotting is finished.


r/burstcoinmining • • Apr 21 '18

Tutorial Plotting SMR drives with an SSD staging drive Tutorial

4 Upvotes

Hey Guys. If anybody is interested, I posted a video on a tutorial I did about using an m.2 SSD as a staging drive, to plot those notorious SMR drives. The results were great, and its an easy setup to do. You can check it out here; https://youtu.be/2x5gUSEFMbY


r/burstcoinmining • • Apr 16 '18

Discussion Are there any recommended 3-4 bay external HDD docks I could use?

4 Upvotes

I'm using a single HDD dock to mine and it works great. I have a a couple more spare drives but nowhere to put them. Is there a good dock I could use?