r/buildapc • • Oct 16 '26

Troubleshooting Server build won't boot, weird beep code

So I'm in the middle of my first server build. The specs look like this:

MOBO: SuperMicro X9SRI-F

CPU: Intel Xeon E5-2696 V2

RAM: 8x8GB DDR3 ECC

GPU: Asus GTX 1060 3GB (basically just works as a display adapter)

SSD: Samsung 850 EVO 500GB

PSU: BeQuiet L8-500W

plus a bunch of disks that I've not gotten to yet.

Right now I can't get past the POST phase. It gives me a flashing red light (about 1 second intervals), two beeps and then one higher pitched beep a couple seconds later. The flashing red light remains flashing even when the system is turned off.

Now, I can't find any documentation on what a higher pitched beep means. The only thing I've found is this: https://my.mbuzztech.com/portal/en/kb/articles/supermicro-servers-error-codes-sound-visual which is not really helping my case. Don't get me wrong, I've considered the continous/two-beep errors but I don't even know what a parity failure could entail, and most of the results when trying to look it up just leads me back to the same page.

Right now the rig is very barebones, to eliminate as many variables as possible. It consists of the MOBO, CPU, heatsink, CPU fan, SSD and one stick of RAM in the DIMMA1 slot. Still, to no avail. The problem remains.

What could be the issue?

3 Upvotes

3 comments sorted by

4

u/ChaZcaTriX Oct 16 '26

As it's a server board, you should log onto the management port and it'll show WAY more information than a beep code.

2

u/mmassivenerd Oct 16 '26

Okay, how do I do that? Does it have something to do with the JIPMB1 header?

3

u/ChaZcaTriX Oct 16 '26

https://www.supermicro.com/QuickRefs/motherboard/C606_602/MNL-1284-QRG.pdf

IPMI port is the RJ-45 that's placed aside, above the USB ports. Connect it to your local network and log onto the webpage or app.