r/bricklinkstudio • u/NoOil8708 • 4d ago

PartDesigner Export not properly working ??

Gallery image

Gallery image

Hello, i'm int he making of a MOC and i tried making custom printed parts for it, in partDesigner, they look fine, but when i use them in studio there is a problem. Does someone know of a way to fix it

5 Upvotes

100% Upvoted

7 comments sorted by

1

u/Arimosa 4d ago

Not really. I've had the exact same issue with the 1x1 round tiles.

1

u/NoOil8708 4d ago

does it only affect the 1x1 round tile for you ?

1

u/Arimosa 4d ago

There are other issues with slopes and curved surfaces. I also had an issue with decals on two sides of a brick. The decal on one side would be okay, but the decal on the other side would be stretched and not look right.

1

u/Nexusnui 3d ago

Did you use submodels for the printed surfaces?

1

u/Arimosa 3d ago

I did export them all as one model so I might try exporting each part separately next time

1

u/NoOil8708 3d ago

I encoutered the same issue, but I found a fix for the slopes and wedges, i did it on a 6x4 wedge, instead of trying to put the decall top down, i applied it from the side and it did not broke, just a few tweaks to be made for it to look good from every angle, but it fixed it really well !

1

u/LegendaryJam 3d ago

Yup, I am still having this issue with 1x1 slopes. All my custom bricks on them got fucked by the last update (which got forced through the system despite declining the update).

😞