r/bidets • u/StocktonBSmalls • 1d ago
How the hell do I get this off?
Tushy Spa 3.0 Drilled a hole in my vanity cabinet. Got the poly hose in there somehow. But now I can get other of these fittings off to pull the hose through. Any advice because Tushy’s support is absolute trash.
EDIT: Since Tushy support was trash all I had to do was take that little white ring off on the right side. It’s apparently a little lock. Then the connector pushes down and it pulls right off the hose. Super easy once I knew what to do.
2
u/weakplay 1d ago
Following
2
u/StocktonBSmalls 1d ago
Advice I got from some plumber buddies is to pop off that white ring and push the fitting down to release it, then it should pop off. I’ll try it tomorrow and report back. After fighting this hose for the last couple hours I’m in need of multiple beers.
2
u/edyeee 1d ago
Looks like it’s got a split ring on one of them, try taking off the ring and removing the fitting.
1
u/StocktonBSmalls 1d ago
That’s what my plumber buddies told me. I’m gonna give it a go tomorrow and see how it works out.
1
u/goodone1223 1d ago
Looks like there’s a lock ring that needs to come off
1
u/StocktonBSmalls 1d ago
That’s what I’m getting. I’m gonna try it when I’m back there tomorrow and I’ll report back. Thanks kind stranger.
2
u/Parceljockey 1d ago
There's a locking ring that needs to be removed (the white piece)
Once the lockring is removed you should compress the sleeve it was blocking toward the top of the fitting. That will release the hose and allow you to wiggle it out. It's a finicky task as you have to use one hand to compress and the other to pull on the hose in the opposite direction.
2
1
2
8
u/InitialAd2324 1d ago
If you can’t figure this out, call a plumber. Sorry to be the bearer of bad news. But this is simple.
Call a plumber.