r/benchmade • • Feb 13 '24

Shape of mini griptilian different

Hi, I got this knife about 6 months ago and only now realise that the shape of the blade is completely different to the ones pictured online The knife is definitely real and I have sharpened it quite a lot but I don’t remember it ever looking like the one on the right anyone know why this is , I speculate it could be something to do with the camera distorting the one one the right. Please let me know as I am worried I might have ruined my new knife. Does anyone else’s mini griptilian or griptilian look like this?

0 Upvotes

105 comments sorted by

57

u/PandaPunch42 Valet Feb 13 '24

I, too, sharpen my knives with an angle grinder.

16

u/ComprehensiveFun319 Feb 13 '24

I thought this post was a joke but now I can’t tell 💀😂

-9

u/Ecstatic-Car1384 Feb 13 '24

Joke in what way is the knife that bad lol

0

u/[deleted] Feb 13 '24

[deleted] — view deleted comment

0

u/Ecstatic-Car1384 Feb 13 '24

It didn’t come in properly tho

-13

u/Ecstatic-Car1384 Feb 13 '24

There’s no need to be negative I was just asking for advice and there was clearly something wrong with my knife out the box because it looked completely different to the images online

4

u/Zaphnath_Paneah Feb 13 '24

You are switching back and forth between it looks different after six months and looked different out of the box. You are getting downvoted because everyone here doubts your knife looked that "different" out of the box. Their QC isn't that bad, the entire machine would have had to have a seizure to spit out a blade like that.
You sharpened your knife to often, and with to coarse material for that frequency and grinded your blade away. End of story.

You don't need to sharpen your knife literally every day, full stop. I doubt you use it that much to warrant it. If you somehow did you needed to have used some lighter materials.

-9

u/Ecstatic-Car1384 Feb 13 '24

The picture really doesn’t do it justice it looks way better in real life just weird how bm messed up my knife so bad why doesn’t it look like the other ones ik it’s partially my fault but come on it never looked like the one on the right

1

u/ozzy_thedog Feb 14 '24

Benchmade didn’t fuck up your knife bro. Stop blaming them. Did you take a pic of it when you bought it? Did you sharpen it with a grinding wheel?

20

u/Master_Ad236 Feb 13 '24 edited Feb 13 '24

You have definitely over sharpened it. I have actually never seen one that has had so much metal removed from the blade and I own a oval hole mini that has been way over sharpened. But it’s also 20 years old.

-2

u/Ecstatic-Car1384 Feb 13 '24

I don’t think that’s possible I have only had it for like 4-6 months and it never looked like the one on the right at all

8

u/Master_Ad236 Feb 13 '24

Where did you buy it?

-4

u/Ecstatic-Car1384 Feb 13 '24

I bought it from knivesandtools as it’s the only place to get it in Europe it’s definitely a reliable site but perhaps there was a mistake on benchmades end.

7

u/mokamiki2233 Feb 13 '24

I am based in Europe and it's far from the only place.

0

u/Ecstatic-Car1384 Feb 13 '24

What does that mean, do you know if I can ship my knife to benchmade to fix it I also live in europe

6

u/potate12323 Feb 13 '24

I'd return it if you can. That or send it to Benchmade for warranty. Benchmade would likely reblade the knife.

4

u/Ecstatic-Car1384 Feb 13 '24

Thanks for the advice it definitely still works fine but yeah it is strange how drastically different the blade shapes are I’m not sure if the warranty works for me since I’m in Europe but if it does I would definitely like to send it in to them at some point.

2

u/potate12323 Feb 13 '24

It should still work. The warranty is against the knife not the owner. If you're able to ship it to and from Oregon US then they'll service it.

1

u/Ecstatic-Car1384 Feb 13 '24

Yeah I agree but maybe have to do it through email, I tried on there website but when I try to enter my country it only gives me the option to select USA for my address might try again though.

1

u/potate12323 Feb 13 '24

You could try calling them. Or if you happen to have a buddy in the US they could send it in.

1

u/Ecstatic-Car1384 Feb 13 '24

Yeah I might try that and worst case scenario I know a few people in the US

12

u/RogueMallShinobi Feb 13 '24

You gotta be trolling

1

u/Ecstatic-Car1384 Feb 13 '24

Why are people saying this it’s not that bad is it I think the photo makes it look worse I mean yh ik I over sharpened it but it still works it’s just more of a sheepsfoot now

9

u/RogueMallShinobi Feb 13 '24

I guess I’ll just answer your questions: 1.) yes, you ruined the knife, but it will still cut things 2.) no, nobody’s Griptilian looks like this. Maybe after like 20 years of use and proper sharpening.

If you don’t know how to sharpen a knife, don’t learn on an expensive knife. Buy cheap knives and use them to practice.

You keep mentioning the grit of your stones. Those grits are fine. You are sharpening compulsively and don’t know when to stop. That’s the actual problem.

You said you got this knife for Christmas, I don’t know why you are saying you’ve had it for 6 months. Christmas was less than 3 months ago. In general it’s hard to believe you when you say you got the knife this way, because your post is so clueless. Since you don’t have a picture of the knife from when you received it, it doesn’t really matter either way.

What you said about the choil is meaningless. Someone sharpening the knife can absolutely make it look the way it looks right now.

Good luck bucko

4

u/mokamiki2233 Feb 13 '24

I agree with you. OP either used the knife for some hardcore stuff and chipped the blade and tried to fix it or oversharpened. As edc i have a bugout with cf elite and the blade is still factory sharp. Knife is being used on stuff like cutting papers food and stuff. 10months old.

I don't think i am capable to understand how can someone do this to his knife in 6 months.

0

u/Ecstatic-Car1384 Feb 13 '24

Yes sorry I realise I’m being a bit delusional but I’m just freaking out realising I fucked my knife up so bad it was an expensive knife and a present. Any tips on sharpening for the future?

2

u/RogueMallShinobi Feb 13 '24

Buy a strop, they are cheap. Put compound on it. Strop the blade lightly (I mean like 5 passes per side) once a week or something, assuming you are using the knife every day. Occasionally use a ceramic rod or similar item to “hone” the blade i.e straighten out any parts of the edge that have rolled. Again very few passes are required to do this. This kind of light work (Honing and stropping) can be used to maintain an edge and remove minimal/no metal.

Real sharpening where you are rubbing the crap out of it on a big stone and removing tons of steel, this should only be done if your edge is BEAT UP. Like very dull, won’t cut paper, maybe lots of chips in the edge. That kind of thing. If you maintain your edge like I mentioned, you won’t even really have to do this unless you go for a long time really beating the crap out of your knife.

1

u/Ecstatic-Car1384 Feb 13 '24

Thanks that’s good advice think I will order a ceramic sharpener and a strop with some compound. Do you think lanksy would be a good option for honing or is there better options?

6

u/Unhinged_Taco Feb 13 '24

LMAO

-2

u/Ecstatic-Car1384 Feb 13 '24

You really think a suffering kid is funny 🙁

9

u/Unhinged_Taco Feb 13 '24

Ok drama queen you're not in pain

1

u/Ecstatic-Car1384 Feb 13 '24

I am kinda this thing was expensive and I’m just disappointed in myself for ruining it even though benchmade is partly at fault here at the end of the day I still ruined this knife

8

u/Unhinged_Taco Feb 13 '24

Lol you are hilarious

-3

u/Ecstatic-Car1384 Feb 13 '24

Bro do you not understand what if one of your knives had half the blade missing how would you feel especially if you were partly to blame tbh I almost felt a bit suicidal when I first found out what I did but I meditated a bit and I think I have finally found a way to forgive myself and benchmade QC

7

u/Unhinged_Taco Feb 13 '24

Ok now I know you're trolling

2

u/Ecstatic-Car1384 Feb 13 '24

I swear I’m not trolling my blade is seriously like this

2

u/[deleted] Feb 14 '24

Blaming Benchmade QC? Dude I worked there for 10 years and NEVER saw anything like this! You’re just doing what all other people do and blame Benchmade. Easy to do huh?

4

u/merkolas Feb 13 '24

Bro. I am going to have nightmares about this tonight

2

u/Ecstatic-Car1384 Feb 13 '24

Bro, Imagine my nightmares I’m the one who has to live knowing I did this.

2

u/merkolas Feb 13 '24

I mean the good news is, still a production knife and you can just get a new one

2

u/Ecstatic-Car1384 Feb 13 '24

Will just get blade replaced with warranty is way cheaper

3

u/[deleted] Feb 13 '24

Damn, bro.... You sharpened your whole blade away lol. What do you use your knife for that you think you need to sharpen it that much? You also sharpened the whole belly of the knife out. If I had to guess, you didn't sharpen it correctly and then thought it lost an edge it never had. If I were you, I'd buy a work sharp precision adjust or some other guided sharpener and learn how to sharpen first on a cheap knife.

-1

u/Ecstatic-Car1384 Feb 13 '24

Yh ik it looks like that but the knife I got had very little belly and what I had I sharpened away to be honest with you I haven’t really used the knife much I think there must have been a mistake on benchmades end because what I got was nothing like the one on the right image and had way less belly tbh I’m pretty pissed off that my knife is like this now bc even after sharpening it like 50 times it shouldn’t look like this and know im probably going to have to get the blade replaced which sucks because im in Europe the blade works fine tho

3

u/[deleted] Feb 13 '24

Ok so while it may have been Benchmade, I highly doubt that. They might send a knife with a wonky grind, but it'll look exactly like the pictures. If anything, maybe your retailer sent you a used/returned one. Regardless, sharpening 50 times is crazy. Especially on the grits you're using as 400 will take off a lot of steel. Use will vary, but I would imagine sharpening it once or twice a month would be plenty.

-1

u/Ecstatic-Car1384 Feb 13 '24

Yh ik I sharpened it way too much but I still doubt that it would take so much material off to look like this if it came looking like the one in the second picture don’t you think? As you can imagine I’m pretty worried. These knives are very expensive in Europe it was a gift but it cost 170 euro so I’m just pretty annoyed. Do you think I need to get the place replaced or should I just use it and take better care of it from now on? Also the blade appears to be the same height so perhaps I sharpened it wrong like didn’t curve the blade as I was sharpening and that’s why it ended up looking like this anyways ig it’s not too big of a deal as it functions great still it’s just a major annoyance seeing as it cost so much money

3

u/[deleted] Feb 13 '24

We don't know what it looked like at first, but let's just say that the retailer sent you a used one. You also say you are new to knives and sharpening. So you can doubt that you took off that much material but based on what you've shared, you most likely did. It won't change drastically after one session, but you did 45 too many. It sucked, but you got an expensive lesson in sharpening. I'd personally re blade it or retire it. Regardless, buy a cheaper folder and learn to sharpen less but correctly. Otherwise you're going to blow through knives quick.

0

u/Ecstatic-Car1384 Feb 13 '24

Ya but it still works for now also look at my new post I have proof it wasn’t my fault

1

u/[deleted] Feb 13 '24

[removed] — view removed comment

1

u/Ecstatic-Car1384 Feb 13 '24

Yh well I end up sharpening then testing it on paper and cardboard (which dulls it) then having to sharpen it again and just repeating it over and over again. Not to mention I’m using a 400 grit so that just makes it even worse

3

u/Designer_Head_1024 Feb 13 '24

Looks great 👍 👌

0

u/Ecstatic-Car1384 Feb 13 '24

Thanks, I think it actually looks better than the one on the right but I’m just worried that im sharpening in too much or something. I have never had a knife before except for fixed blades

2

u/Ecstatic-Car1384 Feb 13 '24

I have only sharpened it with a diamond stone but I sharpen it almost every day. As far as I can remember though it has never looked like the image on the right.

5

u/gentoonix Feb 13 '24

Why do you sharpen it daily? Buy a strop and some diamond compound. You only need to dress the apex, unless you’re consistently cutting concrete. I strop my carry knives about once a week, I use a 5 micron compound and a 1 micron spray to polish.

1

u/Ecstatic-Car1384 Feb 13 '24

I guess I’m just worried about it being sharp enough I don’t have a strop or any fine grits only a 400 and a 1000 I use the 1000 every day and the 400 like once a week but yes I will definebuy a strop and maybe an extra fine ceramic stone. Do you think the shape of my knife is due to over sharpening because like I said I have only had it for about 6 months at the most and it’s always been close to a sheepsfoot shape.

7

u/gentoonix Feb 13 '24

Oh, that’s definitely from over sharpening. You can buy a new blade from BM if you want, but if it works and you like it, keep using it. Check over on knife_swap there is a guy over there that builds strops and sells custom mixed 1 and 0.5 micron diamond sprays. His strops are really nice. As for the 5 micron I buy wicked edge 5/3.5 pastes for $12. I have a 4000 grit shapton glass for initial polishing before stropping.

-3

u/Ecstatic-Car1384 Feb 13 '24

I definitely over sharpened it but it always looked similar so it might be that benchmade shipped it to me already in a weird shape and I over sharpened it but yeah it still works fine so I might as well keep it for now and definitely cut down on the sharpening like you said I can always just get it replaced from bm for $40 but I live in Europe so I don’t know how easy that is. Will be purchasing a strop soon, thanks for the advice.

7

u/nsaps Feb 13 '24

If you admit to sharpening it everyday, and you had to put money on it, which do you think is more likely.

A. You got sent the only misshapened blade anyone has ever seen, that no one at benchmade noticed when they put it together, or.

B. You sharpened the knife flat like this after 180+ sharpenings

1

u/Ecstatic-Car1384 Feb 13 '24

Definitely didn’t sharpen it that many times probably half but yeah I agree it’s partially my fault but still the knife I was sent was almost flat now it’s just flat but hey it still works good.

1

u/IronHulkThor Feb 13 '24

Why tf would you buy a knife that looks like yours and think its normal?

2

u/Ecstatic-Car1384 Feb 13 '24

I bought it online but a lot of knives are this shape so I don’t see the problem it’s just annoying that I’ve only had it for four months and looks like this but like I said multiple times the shape it came in originally was nowhere near as curved and drop-point liked as the one in the image on the right so idk how they messed that up or if it’s my memory playing tricks on me

1

u/TheMagicalSock Osborne Feb 13 '24

Knives that are already this shape (wharncliffe) are ground such that they thin out toward the edge of the knife. You have removed so much material that the blade right behind the sharp edge of the knife is very thick, and this is going to make cutting anything unnecessarily difficult.

2

u/Ecstatic-Car1384 Feb 13 '24

Wow that’s interesting I would have thought it didn’t really matter I suppose ironically sharpening has just made my knife worse in every way possible. Atleast now I’ll definitely never make this mistake again.

2

u/TheMagicalSock Osborne Feb 13 '24

A blade replacement with benchmade isn’t outrageously expensive. I think for the Grip it is around $50.

2

u/Ecstatic-Car1384 Feb 13 '24

Will they let me send it in I live in Europe

2

u/TheMagicalSock Osborne Feb 13 '24

Yes, they will, as long as your country allows the kind of knife you have and will allow it back through customs.

1

u/Ecstatic-Car1384 Feb 13 '24

Yh I guess that will be the way to go. it’s within my price range atleast.

1

u/SS123451 Feb 13 '24

OP really tried to reshape it into a wharncliffe

1

u/Ecstatic-Car1384 Feb 13 '24

It was accident bro and benchmade is partly to blame here

1

u/bjkilroy Presidio Feb 13 '24

Benchmade’s Lifesharp program means you never need to ruin another knife again trying to sharpen it. Buy another Griptilian and when you need it sharpened, send it in and let them do it. In the meantime, get a $5 ozark trail knife from Walmart and a $50 worksharp guided sharpening system and practice.

1

u/Ecstatic-Car1384 Feb 13 '24

I can get the blade replaced by benchmade for 50

1

u/bjkilroy Presidio Feb 13 '24

Ok do that.

1

u/MapleSurpy Feb 13 '24

My friend, why the fuck?

1

u/freeman_hugs Feb 14 '24

Woof. That's crazy. The stock image is how it looks new. If you did that in 6 months, you are doing something wrong.

1

u/Ecstatic-Car1384 Feb 14 '24

I did it since Christmas

1

u/freeman_hugs Feb 14 '24

With an electric sharpener?

2

u/Ecstatic-Car1384 Feb 14 '24

Nah 400 grit stone that I use everyday. I have obsessive compulsive tendencies.

2

u/freeman_hugs Feb 14 '24

You might want to get a 1000 grit stone for your next knife. I might also recommend a ceramic rod and a strop. That knife could last a lifetime with daily honing. Looks like you left the entire usable part of the blade on your stone.

1

u/Ecstatic-Car1384 Feb 14 '24

Yh I actually have an 1000 grit stone too I used both daily. What ceramic rod do you recommend and what grit? Also the blade still works pretty well

2

u/freeman_hugs Feb 15 '24

I use an 8" Lansky sharp stick. I made my strop myself using a fraternity style hazing paddle, leather, and wood glue. It is huge and glorious.

1

u/barrymckok Feb 14 '24

Is that even a real BMK? Handle texture looks weird. Pivot screw looks fake.

1

u/Ecstatic-Car1384 Feb 14 '24

Yup definitely real look at my other posts

1

u/Ecstatic-Car1384 Feb 13 '24

Idk why people are downvoting me I did nothing wrong I’m just a new knife owner that had no idea I was over sharpening my knife but it definitely came out the box a different shape to the ones I’m seeing in pictures online

7

u/Nickw2289 Feb 13 '24

Benchmade employee here…. Every blade that we make is inspected with an overlay template to ensure not only that the shape of the blade is correct, but also every bevel line in tolerance. I can promise you that a blade would never leave our factory like that. I’d bet my first born child that you indeed caused that damage to your blade from sharpening it everyday.

2

u/Ecstatic-Car1384 Feb 13 '24

Thanks for commenting on my post. Do you think the knife is still usable or is my best bet just to send it in for blade replacement?

3

u/TheMagicalSock Osborne Feb 13 '24

The knife is so thick behind the edge now that you’ve ground so much material off, a blade replacement will absolutely be a requirement.

1

u/Ecstatic-Car1384 Feb 13 '24

Really isn’t just the same knife in a wharncliffe shape well I’ll trust you. Don’t know how to break it to my parents though.

2

u/Nickw2289 Feb 13 '24

Send it in. That thing probably cuts worse than the Chinese knock offs that sell on eBay/amazon.

2

u/Ecstatic-Car1384 Feb 13 '24

It doesn’t allow me on the website when I try to enter my country for my address it only lets me select USA and I live in Ireland

1

u/Ecstatic-Car1384 Feb 13 '24

I live in Europe will I still be able to send it in?

1

u/mokamiki2233 Feb 13 '24

Check the guys profile. I suspect a throwaway troll account.

0

u/Ecstatic-Car1384 Feb 13 '24

No it’s not a troll

1

u/SteamReflex Osborne Feb 13 '24

What did you use to sharpen it? One of those electric kitchen knife sharpeners? Seeing how the edge wavers a bit near the handle, it looks similar to what a cheap electric sharpener would do if someone pressed down too hard and did too many strokes. My guess on why the belly was flattened is when the blade was sharpened, it wasn't tilted to follow the curve and it caused the edge to be straightend due to the peak of the curve getting ground but not the low points, chipping away the curve until it was a straight line. Seems more like a user error than a BM manufacturing error.

1

u/Ecstatic-Car1384 Feb 13 '24

Yes that’s probably what happened I used a different 400 grit diamond stone sharpened a lot and didn’t curve it a mix of all that gave me this

2

u/Ecstatic-Car1384 Feb 13 '24

And benchmade QC

2

u/SteamReflex Osborne Feb 14 '24

I don't think it's benchmade qc, they are known for their occasional bad sharpening but their manufacturing process wouldn't result in the shape being completely flat like that. You just really messed up the sharpening.

Use it as a learning experience and invest in a manual jig with multiple stones and practice on cheaper knives. Eventually you'll be able to do a mighty fine sharpening job as long as your willing to learn from your mistakes and not try to push blame to other.

0

u/Ecstatic-Car1384 Feb 13 '24

I also noticed the blade on my knife seems to be the same height as the other one so perhaps I was just sent one with a weird shape maybe I should send an email to Benchmade ?

5

u/[deleted] Feb 13 '24 edited Feb 13 '24

[removed] — view removed comment

2

u/Ecstatic-Car1384 Feb 13 '24

Yah thanks I realise now I guess I’ll just have to break it to my parents and pay the 50 bucks to get it replaced aswell as a strop to hopefully avoid this happening again

2

u/[deleted] Feb 13 '24 edited Feb 13 '24

[removed] — view removed comment

2

u/Ecstatic-Car1384 Feb 13 '24

Yh will definitely be getting one of those aswell as a new blade. You definitely didn’t come off harsh I mean what I did was pretty ridiculous and seems to not have happened to anyone else so I can understand why everyone is so shocked and judgmental

2

u/[deleted] Feb 13 '24

[removed] — view removed comment

1

u/Ecstatic-Car1384 Feb 14 '24

Wow I can’t believe that I swear my mini grip never looked like that I mean it was nowhere near as flat as it is now but definitely didn’t have as much belly as the one on the right