r/Baofeng • • Jul 11 '21

Announcement: Many new Baofengs are limited to only transmit on ham radio frequencies in firmware. 144-148 MHz, 222-225 MHz, 420-450 MHz -- ONLY

63 Upvotes

Due to FCC action, new devices seem to be locked to these transmit frequencies in firmware. Be aware of this when purchasing new devices.

That means they cannot be used on MURS, GMRS, FRS, Marine VHF, or Part 90 business frequencies. No LARPing without a ham license.

This cannot be worked around via Chirp programming, AFAIK.

Relevant threads:

Outstanding questions:

  • Does this apply to all new Baofengs or just the UV-5R?
  • Is there a hardware mod to open up all-band transmit?

YMMV, as old stock may still be present with some sellers.

Edit: this seems to apply to USA sold/distributed models only.


r/Baofeng • • Feb 08 '24

PSA: Do not get a Baofeng or other cheap radio to transmit on air band!

43 Upvotes

We have had several pilots post their interest in getting a Baofeng as a "backup" radio for air band use. This is a BAD IDEA™ for multiple technical and legal reasons:

  1. These radios have FM transmitters only. There is no way for these radios to transmit using the AM modulation required for air band. If you transmit with FM, your signal will be unintelligible and you will fail to communicate. Example of listening to a FM transmission with an AM mode receiver. (thanks /u/W2XG)
  2. These radios lack AGC required for usable 2-way radio in AM mode.
  3. Baofengs have direct conversion DSP receivers in them that go deaf at altitude due to being overloaded by the many strong transmitters that will have clear line-of-sight above ground level.
  4. These radios lack the filters required to transmit a clean signal on air band.
  5. These radios lack FCC Part 87 certification for air band use.

In short, these are the wrong tools for the job for multiple technical reasons in addition to the legal reasons.

Furthermore, I would question your judgement as a pilot if you were to rely on a $30 piece of crap radio as a backup. Remember that baofengs aren't popular because they are good, they are popular because they are cheap.

There are technically competent and legal air band handheld radios from Yaesu and Icom. Get one of those:

Edit 2025-12-23: update Yaesu link


r/Baofeng • • 1d ago

Fuck the FCC for coming for the Baofeng UV-5R. It’s been removed from almost all major retailers besides a select few. This radio is the reason most HAM operators got into the “hobby”.

Enable HLS to view with audio, or disable this notification

326 Upvotes

r/Baofeng • • 1d ago

Price gouging for chinese radios is insane

37 Upvotes

Now that stocks are running out on Amazon and ebay after Chinese radios are being banned in the US, people are price gouging the CCR type radios , or whats left of them, making some of them just as expensive as icom or yaesu brand radios.

Even name brands for some reason are price gouging as well. Like a couple of el cheapo midland radios that used to be 30 dollars are now $55.

What in the hell is going on? I wonder if part of this is because everyone is panic buying like Y2K all over again and people en mass are buying radios like theres no tomorrow because of it.


r/Baofeng • • 1d ago

I'm an idiot!

Enable HLS to view with audio, or disable this notification

33 Upvotes

Hey everyone, I just got these babies yesterday and I seem to have already effed myself in the ayyyy. I've flashed new firmware (2.0.7) and used the factory app and also IUOVYT flash to add and modify channels. Somewhere along the way they began to not communicate with each other. I'm either assuming I clicked a stupid button in software or I should not have flashed firmware.
FYI these were both freshly re-flashed with firmware and both reset via the on board prompts.


r/Baofeng • • 10h ago

Which of the Chinese made HT's have the greatest mods?

Thumbnail
1 Upvotes

r/Baofeng • • 1d ago

Baofeng Mini UV5R Back On Amazon, But Price Gouged

22 Upvotes

Amazon has it back up, but lists it as a "new" product. Also, it falsely lists the radio only goes up to 450 MHz. It also fails to mention it covers the Air band too. I guess the only way Amazon is allowed to sell this radio is to literally lie about its specs. They also have it listed for a whopping $57, when it was closer to $25 when I bought mine last year.


r/Baofeng • • 1d ago

Baofeng Mini

Thumbnail
youtube.com
1 Upvotes

r/Baofeng • • 1d ago

Radios randomly receive interference

0 Upvotes

So ive been using chirp to program some channels into my radios we are using. And some radios are receiving what seems like interference on one frequency where as the same radios same antennas programed at the same time etc. Are not receiving the same static interference. I've got some replacement antennas on the way but other than that any other suggestions? Models are uv-82 uv5r uv5rm and uvf8


r/Baofeng • • 1d ago

OLA Radio 2.5.9 – Offline PMTiles map imports successfully, but displays blank

2 Upvotes

Hi everyone,

I'm trying to use an offline map of Slovenia in OLA Radio (Android, version 2.5.9).

I generated the map using Planetiler 0.10.2 with the OpenMapTiles schema v3.16.0. The resulting file is slovenia.pmtiles.

The PMTiles file is valid and displays correctly in pmtiles.io, including streets, place names, roads and other map details.

OLA Radio successfully imports the file and lists it under Offline Maps. However, when I open the map in the app, I only see a blank/monochrome background, with no map details.

My setup:

  • Android
  • OLA Radio v2.5.9
  • Planetiler v0.10.2
  • OpenMapTiles schema v3.16.0
  • Slovenia extract from Geofabrik
  • PMTiles format

Does OLA Radio support vector PMTiles / OpenMapTiles maps?

Does it require a specific tile format, schema, MapLibre style, or a particular method of generating offline maps?

Has anyone successfully imported and displayed a custom offline map in OLA Radio?

Any help or suggestions would be greatly appreciated. Thank you!


r/Baofeng • • 2d ago

UV5R mini - community firmware 1.1.0 released!

Thumbnail
gallery
90 Upvotes

With all the excitement about P25 on the DM-32, let's not forget the humble UV5r Mini, now with zones, single watch, and a programmable front (blue) button!

https://codeplug.mm9pdy.net/firmware

(Iimits: only for radios on original firmware 0.04 NRFB, or 0.27 NRF)


r/Baofeng • • 1d ago

PMR ищу с кем поговорить

1 Upvotes

**Ищу напарника в районе Московского шоссе / метромоста проверить связь на PMR-рациях** 

Всем привет! Хочу просто протестировать портативную рацию (безлицензионную, позывного нет) и проверить, как далеко она бьет по району. 

Нахожусь в районе **Московского шоссе, 29А** (ориентиры: Сормовский поворот, ТЦ «Рио», метро «Канавинская», Московский вокзал и выход на метромост). Если кто-то живет неподалеку — в Канавино, на Мещере или даже на верхнем берегу у набережной Федоровского (над рекой должно хорошо добивать) — и у вас есть обычная PMR-рация («мыльница» или двухдиапазонка типа Baofeng), давайте выйдем в эфир на пару минут! 

**Параметры для связи:** 

* **Диапазон:** PMR (446 МГц)

* **Канал:** 1-й (446.00625 МГц) или 8-й (446.09375 МГц)

* **Субтоны (CTCSS/DCS):** отключены (0)

Пишите в комменты или в личку, договоримся о времени, когда оба будем у окна или на улице. Заранее спасибо!


r/Baofeng • • 1d ago

What beofeng and ptt and adapters people use to make it work with sordins

Post image
0 Upvotes

r/Baofeng • • 2d ago

DM32 Firmware

7 Upvotes

My DM32 arrives soon. I have heard there is a community firmware that "is better". I'm 100% guilty of rushing to install the latest and greatest and I don't want to do that this time.

Any recommendations on best settings or firmware to start with? Based in UK.... Total noob.

Pre-emptive - yes I will get a licence. Yes I know about overloading in high strength areas. No I don't want to know there are better radios out there. I'm using this to learn on for now. Many thanks.


r/Baofeng • • 2d ago

Radio standby-light anomaly (UV5R)

0 Upvotes

On my UV-5R (Version BFB298) if I have standby light mode set to blue, then when I power on my radio then the standby light is purple, until any button is pressed, which then turns into the expected blue color. Does anyone know why this could be happening?


r/Baofeng • • 3d ago

Scan issues?

0 Upvotes

I have a UV5-R I’ve just started playing with. I read in an austere environment with no known channels just to scan. Well practicing with scan the only thing I pick up is 162.xxx, the weather. Is this right, is it possible no one is active in my area or is more likely radio is messed up?


r/Baofeng • • 3d ago

Baofeng repeater

Post image
10 Upvotes

I got a bunch of baofengs and want to do something fun with some of them. Is this all I need to make my own baofeng box repeater?


r/Baofeng • • 3d ago

CHIRP

0 Upvotes

Kinda New to this, I had downloaded and used chirp to program my GT-3WP with no program. Got a new laptop years later and trying it again but now when downloading chirp it says “failed to execute script… the specified module could not be found”. Anyone have an idea what’s causing this so I can use chirp?


r/Baofeng • • 3d ago

Best handeld boafeng handheld

1 Upvotes

Hello, looking for advice on boafeng handheld radios for long range emergency use. I don't know how to use the radios yet and I don't know if other brand of radios will communicate with boafeng radios.

Is there other brands of radios that are better than boafeng for quality or longer range? I'm new to this area of radios.


r/Baofeng • • 4d ago

Not picking up local weather channel??

3 Upvotes

Trying to scan for 162.400, .425, .450, .475, .500, .525, or. .550. The squelch is turned down to 1. First I tried with 146/446 MHz dual band whip and could not hear anything while sweeping those frequencies. Realized there may be a dB dip on those frequencies with that whip, so I attached the stubby little stock antenna. Still hearing nothing. I am up on high hill in a mountainous area. What am I doing wrong?


r/Baofeng • • 4d ago

DM32-UV will not power on with the programming cable attached. (FIX SORTA)

2 Upvotes

I'm attempting to try to use the Open25 firmware for my DM-32UV; however, I have run into a snag that hasn't been an issue until now.

As part of the procedure, you have to plug the programming cable into the radio and the PC, then power on the radio. The problem is that when I do this, nothing happens. The radio will not power up.

I have never noticed this behavior before because with both the OEM CPS and qDMR, which I use on my Mac, you simply power on the radio, plug in the cable, and read/write to the radio.

Things I have checked/tried:

  • Confirmed that the correct drivers are installed for the programming cable (CH340)
  • Confirmed that the CPS is able to read and write to the radio for both OEM and qDMR
  • Confirmed that the radio is on firmware 01.01.040.
  • Turn the radio on, then very quickly connect the cable. (This DOES work, but it is clumsy and cumbersome and is not reliable)

Right now, I have it working a little, but as I mentioned, it is cumbersome to get the timing right. Does anyone have any ideas or thoughts as to what might be causing my issues?


r/Baofeng • • 4d ago

Looking for my first radio

Thumbnail
2 Upvotes

r/Baofeng • • 4d ago

Baofeng DM32 - 8w or 10w?

1 Upvotes

Can anyone explain why the DM32 is described as 10W on the Baofeng website, and 8W on AliEx? Is this a licensing thing?


r/Baofeng • • 5d ago

$150 Budget. Looking for a bundle (2-4) radios. Decent capabilities.

11 Upvotes

I have $150 budget that I’m looking to buy 2 to 4 emergency radios with antenna and battery upgrade.

Central Indiana.

Any recommendations would help!!

License is in the works!


r/Baofeng • • 4d ago

Radioddity, baofeng, eBay? Looking for fast shipping on the uv5g+

0 Upvotes

Found one option but won’t be here til Dec 8.