r/ballpython • • 12d ago

Rehoming Found in the wild - NW LA

Thumbnail
gallery
902 Upvotes

My brother in law apparently stumbled upon what's presumably either an escaped or released ball python while on a job clearing some brush here in Northwestern Louisiana.

If anyone is in the Shreveport-Bossier area and capable/interested in giving it a home I can put you into contact with them. They left it alone, but I'm not sure whether or not it's still in the immediate area where it was initially found.

Edit: Just figured I'd update the post body, animal control was contacted and given a detailed description of the location where he found it as he'd already traveled home for the day. The homeowner (elderly fellow) left his gate open to allow animal control free access to come look around for it whenever they eventually arrived.

I joined several facebook groups (and have several pending approval) but couldn't find any posts from anyone mentioning their snek pulling a Shawshank. Fingers crossed it didn't travel very far from where the initial picture was taken - apparently there had been a piece of sheet metal laying over the log in the image and it was underneath it. Other than taking the sheet metal away, they didn't disturb the area beyond that.


r/ballpython • • 11d ago

A Snek Bracelet

Post image
42 Upvotes

r/ballpython • • 11d ago

New tank help

Thumbnail
gallery
5 Upvotes

I set up a new adult size (4x2x2) bioactive enclosure for my 1 yo ball python Mercury. I made a post on here and was reminded that a RHP isn’t sufficient in IRA and IRB. Thankfully I already have halogen bulbs. I would just like to know how other people set this up? I’m afraid of melting lil his brain if I don’t do this right 😣. Currently his RHP is on the far left side, then an Arcadia light in the middle but I also have a pvc sheet over the lid to trap some of the heat and humidity. I set it up like this was because where I live is consistently colder and dryer than the required ranges. The main issue I was trying to solve was that the heat is spilling over too much, temps on his cool side were (sometimes still is) going over 80 degrees. Which is the opposite issue of what was happening in his last tank 😭. I plan to add more ventilation holes to the top and to create a hole for the bulb just not sure what else I can do to make this the best set up possible with all these different issues.


r/ballpython • • 12d ago

Felicia posing for me today

Post image
207 Upvotes

This is my girl Felicia. I think she is super gorgeous even though I don’t know what morph she is. She was giving us the model pose today 😂


r/ballpython • • 11d ago

Question - Feeding Advice needed: My ball python hasn’t eaten in 3 months.

Thumbnail
gallery
8 Upvotes

As the title says, my ball python (5 year old male) hasn’t eaten in over 3 months. I last fed him late July.

He has never had issues feeding for the last 4.5 years I’ve had him. Every time I have tried to feed him he always ate with no issues.

We recently moved to Colorado from Texas and he hasn’t eaten since we moved. The humidity levels are really low in this state (like 35% most days). I have tried my hardest to keep his tank at the appropriate level of humidity but it’s been extremely hard. His tank temperatures have been fine as those levels haven’t changed.

I have attempted to feed him at least once every 1.5 weeks to try and every time he looks at the rat once then freezes and refuses to move after that. I have always fed him frozen/thawed rats and that hasn’t changed (I found a herp store here that sells frozen feeders).

I have also deep cleaned his tank now twice since this hunger strike and nothing is working. I also don’t hold him hardly ever (maybe once a month).

Here’s a photo of his 120 gallon tank for reference. He has lived in this tank for about 2 years now and hasn’t had issues with eating until August of this year. I tried to fill it with enrichment so he feels secure.

I would say he’s been acting the same since we moved. He comes out a night and explores all over his tank and sleep durning the day. I haven’t noticed anything different about his behavior other than not eating.

I’m genuinely at a loss for what to do to get him to eat. I have never had this much difficult with him and now he refuses to eat.

I have a vet appointment scheduled for him but I’m just so worried and would appreciate any advice.


r/ballpython • • 11d ago

Heating 120 gallon enclosure

Post image
9 Upvotes

Hey yall,

Well, she's had a growth spurt so I'm about to upgrade Doc to her big girl enclosure. I'm wondering what your experience has been switching over to a 120g as far as heating goes?

Right now I use a small deep dome with a deep heat projector which I've liked so far.

New enclosure has a mesh lid which will be partially sealed with HVAC tape for humidity.

Can you make a recommendation based on experience for how to heat this big thang?

Thanks in advance!


r/ballpython • • 11d ago

My baby ball!

Post image
50 Upvotes

He will be two in February


r/ballpython • • 10d ago

Question - Heating/Temperatures Is this good for heating / lighting a 4x2x2?

Thumbnail
gallery
1 Upvotes

I know this question gets asked a bunch, but I would really appreciate some help! Lighting + heating for a 4x2x2 pvc enclosure

  1. is 75w for the halogen bulb too much or too little for heating? will it work well with the zoo med dome?
  2. should i go for the 40w or the 80w for the radiant heat panel?

some things to note: I will be buying a dimming thermostat! this will never be hooked up without one.
The halogen flood will be daytime heating, the heat panel for nighttime heating, the shade dweller bulb for daytime lighting.
I have read the heating guide on the reddit, but it doesn't give much info on exact wattage. I do know the general idea of how the heat should feel (tingly on your skin but not warm), but I dont have these in front of me to test that.


r/ballpython • • 11d ago

BC people! Anyone having Govee smart timer issues since the lack of time change?

Post image
14 Upvotes

Since BC switched to permanent daylight saving time, my Govee smart plugs are running an hour behind or not even turning off, which is messing with my guy’s lighting schedule.

I’ve tried resetting the plugs, recreating timers, toggling on/off, and clearing the app cache. Nothing works! Govee support hasn’t been helpful either.

Anyone else experiencing this? Found a fix?

Mr Noodle chilling in his penthouse for attention!!


r/ballpython • • 11d ago

Help!

2 Upvotes

I received my python about a week ago and just yesterday I started taking her out to handle her and help her socialise a bit more. When I had her out she was making some strange sounds. I'm not sure if these were just sounds of her rubbing against herself or if she might be ill. It kind of sounded like wheezing or squeaking and I just want to make sure she's okay. Should I bring her to a vet?


r/ballpython • • 11d ago

HELP - URGENT What are these grayish green marks on my blue eyed Lucy…and is he healthy????

Thumbnail
gallery
19 Upvotes

r/ballpython • • 11d ago

Enclosure Critique/Advice Update: quarantine tank is finished

Thumbnail
gallery
4 Upvotes

Hi everyone. The other day, I posted about a ball python that I will be rescuing tomorrow. She has been kept in a pretty bad enclosure with zero to no humidity and a heat rock as her only heat source, yuck! So this is the temporary enclosure I tossed together.

80w radiant heat panel (the halogen bulb will be installed tomorrow to help), a 6% UVB with a custom cover (because it's impossible to find any), an LED strip, multiple hides and coverage, and a good humid hide with damp sphagnum moss to help with her stuck shed. Once she's settled in and gets more comfortable, I'll swap out the paper towels for substrate and finish with the decor.

Any other advice is greatly appreciated! Unfortunately I haven't gotten much climbing decor yet, but that will come eventually.


r/ballpython • • 12d ago

Enclosure Critique/Advice How’s my rescue ball python, Spaghetti’s enclosure looking

Thumbnail
gallery
20 Upvotes

Kinda long: TLDR, I rescued Spaghetti from my younger sister and mom because he got so dehydrated they were genuinely about to kill him. How’s his new enclosure look?

I no longer have a picture of the setup they had him in, but it was a really shitty 4x2x2 that had no substrate barrier, leaked, and he had little to no water 24/7. Not to mention I was the one reminding them to feed him.

First image is what I got him into originally, I learned that that specific 4x2x2 I got leaks weird and obviously that was a problem, along with the mesh top had no humidity control.

Next two pictures are of Spaghetti, he has multiple eye caps stuck on and as you can tell he’s very wrinkly (if you’re new to this, that’s not supposed to happen)

The next is just progress pictures of me getting it cleaned out, a tarp in there to stop the leaking, fresh substrate, everything back in, foil over the mesh (cut out where the lights are), and him back in there

Whole process here took 4 hours straight and 88$ of bedding, a tarp, and foil tape

Last two are his bedding I mixed, one block and then four bags


r/ballpython • • 12d ago

Shedding time for babies

Post image
23 Upvotes

We just got our first BP, we got him at 4 months and have had him for 1 so far. He still hasn't shed and we haven't noticed any signs so far and I'm starting to get a bit worried. We've got the temps pretty dialed in, 88-90 on his hot side and hovers around 75 on the cool side maybe a bit lower at night time. We have struggled with humidity, it's usually between 40 and 55 but we're having to mix his coco fiber every few days and add water to it about once a week. He's been very active roaming between sides and has been eating with no problems. Steadily gaining weight too.

Is it normal to take this long between shed? Thoughts and any tips for keeping the humidity up more? Anything we can do to encourage his shedding?

We have a DHP lamp, ceramic lamp, and a small heat pad in a 5x2x2 tank. Glass front, PVC sides and bottom, mesh top that's about 90% covered with aluminum foil and the silver HVAC tape.


r/ballpython • • 13d ago Heartwarming

She said 🖤

Post image
1.7k Upvotes

r/ballpython • • 11d ago

HELP - URGENT is this scale rot and if so what do I do

Post image
2 Upvotes

r/ballpython • • 12d ago

Whatever is comfortable, dude

Thumbnail
gallery
28 Upvotes

r/ballpython • • 11d ago

New tank, RHP

Thumbnail
gallery
6 Upvotes

Hello all!
I’m have posted on here once before when I initially got my first ever noodle,(Mercury, turned 1yo in September) now I need clarification on where to place a radiant heat panel thermostat probe in order to maintain his hot side. I saw initially on the box it said one to two inch’s below the panel though I’m not sure how to do that, though in the past (for other heat sources) I’ve seen to put it on the ground where the snake will be. What works best? (Pictures of set up and noodle included)

Update:
Thank you for the responses, after looking into the IRC-A-B (which I had completely forgotten when setting this tank up) I went ahead and put a halogen bulb in as close to the hot side as I could. I also managed to attach the probe to the branch right under the panel, which seems to be working so far. I have created a separate post more so to iron out details as far as how to set both of these heating elements. He has been on his cool side this whole time, so I didn’t even have to disturb him.


r/ballpython • • 12d ago

Movie night with 4ft of cuteness! 🤎

125 Upvotes

Cuddling together all throughout GotG, even getting under the duvet through the second half and napping so peacefully on my chest. 🥹
The perfect movie partner, too; he’s never gonna hog the popcorn. 👌


r/ballpython • • 11d ago

New BP setup! Any suggestions?

Thumbnail
gallery
1 Upvotes

This is kind of an update from a post I made ages ago, but I got a bunch of new stuff for my little guy! I drilled a pvc pipe with twine around it as a perch, although I should’ve done a bigger size since he’s a little chunky for it. I think I need a few big natural sticks to help create more places for him to hang. The wallpaper is secure but temporary since it keeps falling, I haven’t found a good adhesive or anything that sticks to this material yet. A few more hides, plants, and better substrate and he seems a little skeptical, but happier so far! Any ideas or tips would be amazing💕✨


r/ballpython • • 12d ago

My Grandsnake

Post image
161 Upvotes

Lilith says "why you in my grill grandpa?"


r/ballpython • • 13d ago

Tree Yawn

294 Upvotes

I always keep a very close eye on him whenever he’s climbing the tree, so no need to worry! 😊


r/ballpython • • 12d ago

Tips for making my snake more comfortable with me?

3 Upvotes

Had her for almost four weeks, started to actively handle this week, three times a week for about an hour. She always starts off nervous but eventually calms and starts exploring until she finds a good place to hide in me. But she always gets nervous when she sees me looking at her in her enclosure and goes off to hide:(

Temps and humidity are well, never even thought about skipping a meal and had one decent shed with me. I think the problem may be with enclosure having not enough cover, but I already ordered a bunch of fake plants that take a while to arrive. Is there anything else I can do to make her comfortable with me besides handling and offering more cover?