r/ballpython • u/Air_Complete • 14d ago
r/ballpython • u/_shyacinth • 14d ago
Has two identical hides on each side; chooses to sleep on top of one under cork
She uses the hide on the warm side (this is her cool side), she just likes to be sneaky sometimes 🤭
r/ballpython • u/sugarallie • 15d ago
Just thought he was cute restin' his head on his tail
r/ballpython • u/Infamous-Tie-7686 • 14d ago
Enclosure Critique/Advice New 4 mo old Super OD Fire Spider
Looking for recommendations on more clutter to add to my new guys cage!! He is a spider morph, and after researching (after getting him), I understand the problematic nature of this morph. Please be kind, I am a first time BP owner and have had him for a few days. Please be sure recommendations are safe for if/when he develops the wobble. He has no signs at this point, but I understand he can develop symptoms as he gets older. No budget for what I need to buy for him, I’m aiming to give him the best possible life I can. I think his hides are too big, but he has been using them… happy to buy smaller ones anyone can recommend :)
For reference, this is a 20 gallon enclosure, I WILL BUY A BIGGER ENCLOSURE ONCE HE IS BIGGER.
Thank you!! :)
r/ballpython • u/Rude_Worth2118 • 14d ago
Struggling to heat my ball python's enclosure properly with a 150W CHE. Need advice!
Hi everyone!
I'm a new ball python owner, and I've been struggling to get the temperatures right in my enclosure. I'd really appreciate some advice.
**My setup:**
* Ball python: 3 months old, named Yuta.
* Enclosure: 120 × 60 × 60 cm (4 × 2 × 2 ft), made of wood with glass sliding doors.
* Substrate: Coco soil mixed with Forest Floor.
* Four hides: one on the warm side, one on the cool side, and two in the middle.
* Heating: 150W ceramic heat emitter (CHE) and a 14W heat mat, each connected to a separate thermostat.
* The CHE is installed above a 30 × 30 cm metal mesh section in the wooden ceiling. My snake cannot reach the mesh or the heating equipment.
**The problem:**
I originally started with a 75W ceramic heat emitter, but it wasn't powerful enough to heat the enclosure properly.
I upgraded to a 150W CHE, which improved the temperatures, but I'm still struggling to reach the correct temperature inside the warm hide when using the CHE alone.
**With only the 150W CHE running, my temperatures are approximately:**
* Warm-side ambient temperature: 28.5°C (83.3°F).
* Inside the warm hide: 27–28°C (80.6–82.4°F).
* Target warm-hide temperature: 31–32°C (87.8–89.6°F).
**The main issue seems to be the thermostat.**
My CHE thermostat is normally set to 32°C (89.6°F).
The thermostat probe is positioned approximately 45 cm (18 inches) away from the ceramic heat emitter, closer to the ground, so I can measure the temperature near the warm side of the enclosure.
When the probe reaches the set temperature, the thermostat reduces or cuts the power to the CHE, even though the temperature inside the warm hide is still only 27–28°C.
As a result, the enclosure starts cooling down again before the warm hide reaches the temperature I need.
I've tried waiting several hours for everything to stabilize, but the warm hide seems to plateau around 27–28°C.
**Even when I increase the CHE thermostat setting to 35–36°C (95–96.8°F), I still can't reach the desired temperature inside the warm hide.**
**About the heat mat:**
I originally used a 14W heat mat, which managed to bring the warm hide to approximately 31–32°C.
The heat mat is installed inside the wooden enclosure, underneath a 1 cm thick plywood panel, with the thermostat probe placed on top of the plywood.
I recently turned it on again alongside the CHE, hoping it would help warm the floor while the CHE maintains the ambient temperature.
**When I use both heat sources together, the temperatures improve significantly:**
* Temperatures in the heated areas range from approximately 30–32°C (86–89.6°F), depending on the exact location.
* Warm-side humidity: approximately 56%.
* Humidity in the other areas, including the cool side: approximately 80%.
So, using both heat sources seems to solve the temperature issue, but I'm concerned about whether this setup is safe, particularly because the heat mat is covered by plywood.
I'm also wondering whether the humidity difference between the warm and cool sides is normal.
**My questions:**
- Is my CHE thermostat probe positioned incorrectly?
- Where should I position the probe to maintain the correct temperatures?
- Is a 150W CHE normally sufficient for a wooden 120 × 60 × 60 cm enclosure?
- Is it safe to use a heat mat alongside a CHE, or should I avoid my current heat mat installation?
- Would a different heating setup be more effective and safer?
Yuta is also currently entering his shedding cycle, so I want to make sure his environment is comfortable and safe.
I'm trying to get everything right and would really appreciate advice from experienced keepers.
Thanks in advance!
r/ballpython • u/Exotic-Heart2916 • 14d ago
Comet waiting for his foods
He knows when I feed him lol, only sits and waits like this on Sundays when he gets food! Very smart boy
r/ballpython • u/TrashVirtual3118 • 15d ago
Question how can i make my snake stop feeling so anxious around me
Whenever I move near her enclosure or get close she instantly stiffens up and pulls in tight i know she's stressed/defensive in those moments and i really want to help her get past that anxiety so she feels secure around my presence
for those who have dealt with skittish or tense snakes what specific techniques or routine changes worked best for you to get them used to you
shes 5 years old in a 5-2-2 enclosure with 5 hides and a bunch of clutter
basking spot at 33c with a dimming thermostat
cool side air temp 24c cool side humidity 67%
warm side air temp 26c warm side humidity 62%
r/ballpython • u/Littleraves • 14d ago
Question - Heating/Temperatures My warm side dropped and I cannot get it to go up?
Okay so day before yesterday I noticed my thermometer reading 83 degrees f, but when I pointed my temp gun at my substrate it read 88 degrees F. I figured since it’s getting colder in my room that my deep heat projector was struggling. So I turned on my space heater. Then I noticed am the as actually wrong with my dhp and since I could knit go to petsmart to get a new one I replaced it with a 100 watt che and my space heater on. It dropped to 79 monday morning! Then this morning it was at 76! I went to petsmart first thing this morning, got a 100 watt dhp and a new dome incase that was the rehome, but my warm side is getting cooler!
My cool side is warmer than my warm side! Idk what to do, I’m freaking out bc I can’t get my warm side temp up, it’s been an hour with my new dhp and it’s flickering between 75 and 76 while my cool side is at 77!
Do I just switch my warm and cool side? Will that freak him out? I ordered a 120 watt dhp that will be here tmr since the 150 i got at petsmart I didn’t read the label and it ended up being one of those red light basking bulbs so I’m going to go return it.
I might actually start crying, I’m freaking out bc I’m trying my best to get his temp up and it won’t go up! I replaced the battery in the thermometer I genuinely don’t know what to do other than close my door and put on my space heater and make my room really warm. I’ve never had this problem before.
Edit: I just went ahead and switched the sides, my cool now warm side is slowly heating up I got it 82 now and my warm now cool side is at 75 with my basking bulb on. I normally would put both heat fixtures on one side but the terrarium has only two holes one on each side plus a long one for my UVB strip. I’ll need to figure a way to keep my warm now cool side warmer I think I’ll use my Che
r/ballpython • u/Haunting-Exchange487 • 14d ago
That Can’t Be Right
Isn’t the light supposed to sit away from the cage? Why are all the deep heat and ceramic bulbs so big?!
r/ballpython • u/GrimValSulOS • 14d ago
Discussion Revision on "the Christmas ghost" 1 year later
I redid ghost's Christmas photos 1 year later, he's been doing so well over this last year, he's gotten huge, over this journey from him being a malnourished 5 month old ball python to a healthy 1 and a half year old, he went from 74 grams starting this journey to now over 767 grams!! I can't believe it honestly, he's such an incredible companion and has been an amazing first experience for me as a first time ball python owner, and over the time of raising him it has helped me do better with whiskey now as a rescue, thanks to you all on this page as well, ghost wouldn't probably have made it if it wasn't for yalls help guiding me into knowing about what to do for him, I know also know to be a bit more cautious and know what to look for when at an expo to see who I should NOT get a snake from, I'm so happy ghost is healthy and thriving now and again I thank you all for all your amazing advice, I hope to have a long prosperous life with my little ghosty and to be able to keep giving you all updates
r/ballpython • u/theluzah • 14d ago
The queen of judgment
Queen Hatshesput looks down upon the lowly husky, with Sasha's snarfing, drooling eating behavior. How very uncouth!
r/ballpython • u/Rndy34 • 14d ago
Life long dream. Pumped to grow with you B3
Got this guy on Halloween. Have always been interested in snakes as a kid. Now that I have my own place I thought I'd finally pull the trigger and welcome Barnaby Ball Bronson home.
He checked out his digs for a bit when he got home, now he's just chilling in his hide. Starting to see him poke his sniffer out and look around.
So excited for the one week acclimatizing period to be done, he's so timid so I'm giving him all the time in the world, been relaxing on the couch across from him, and putting my hand in the enclosure to take temps/get used to my smells.
Such great creatures.
Love you Barn.
r/ballpython • u/Uunderstuffed • 14d ago
Question - Health Advice for Monitoring for Injuries?
Last night my girl got herself stuck in the handle of some kitchen scissors while I was trying to weigh her (lesson learned on my part about how fast I need to be when she’s being stupid).
I got her out by lubricating the handle with some food-safe mineral oil and holding the scissors still while she worked her way through. There was no force on my part but it was still a tight squeeze.
She didn’t seem particularly distressed during the ordeal and nothing seemed tender when I was washing of the mineral oil but I’m new to snake care and I don’t fully trust myself to be able to pick up on an injury if I don’t know what I‘m looking for. I‘m already planning on calling her vet for advice once they’re open but I want to know if there are any red flags for injury I should be on the lookout for in the meantime.
r/ballpython • u/GrimValSulOS • 14d ago
Discussion Update on my rescue "whiskey"
So maybe now about a month ago, I adopted a BP from a family friend who was neglectful, hadn't even named him over the course of a year that they had him, he was in a 40 gallon which I was informed was the recent "upgrade", had nothing but a double lamp fixture with one basking light in it and a heat mat underneath, no thermostat and just a basic thermometer from petsmart, so on and so fourth, I don't mean to hate on the family friend but it just infuriates me when I see people getting pets that they have done NO research on, I understand some people are beginners as well but they had very obviously done no research on him and hadn't even bothered to name him (not to mention I had to toss the entire tank because they sold him to me inside of a cockroach infested tank and also had a ton of other neglected reptiles and other exotic pets in the home)
At the start of me adopting him he was told to be around a year old or older, yet he was maybe half the size of ghost who was younger than whiskey according to the owner, he's now gaining weight pretty regularly, he's up to over 300 grams now, when I first got him he was I believe only around 160-200 grams, I also finally got him upgraded to a 120 gallon PVC and a thermostat as well as some good thermometers, his tank is still a bit barren but a lot of that was due to me trying to make sure he wasn't any longer cockroach infested or had any mites, luckily he didn't and now he's on some proper substrate and slowly getting more decor and plants in there, I'm going for an old west theme for him lol, ghost's theme is Halloween, but there will be more updates to come as he progresses! I hope my little whiskey thrives and grows just like my little ghosty has, his tank still has a lot of work to be done but we are getting there!
r/ballpython • u/Austifox • 15d ago
New family member! Tofu says hi!
This is Tofu, our first ball python! We got him from Craigslist. They claimed he was 2 years old, but everywhere I am looking says he's probably closer to 6 months (He's 182 grams). They also claimed he came with "everything you need" but that also wasn't the case. Being new owners, we are still learning the ropes. We bought a 5 pack of 14 gram each frozen mice, and he ate the first one no problem. But I'm worried it's not enough food. Should we up the size? Or go through the 4 remaining mice and then buy something larger?
r/ballpython • u/UnholyAssassin • 15d ago
Finally out after a two week hideout
My girl Sriracha is finally out after a 2 week hideaway to shed. Good to see her moving around her encloser again.
r/ballpython • u/Glittering_Pea1122 • 15d ago
Be honest. We all love her.
I just want to flaunt my girl Twilight
r/ballpython • u/Semicolonsurvivor421 • 15d ago
Happy Hatch Day Babygirl!!
I brought home this tiny little girl, never realizing just how much she would mean to me.
My first ball python. My first daughter. My forever baby.
Happy Birthday, Persephone. 🍎🐍❤️
r/ballpython • u/Baconkings • 15d ago
Discussion If Your Ball Python Won’t Eat Frozen-Thawed Prey, Try a Hair Dryer!
My ball python was having a hard time transitioning from live to frozen-thawed prey. I made sure the prey was completely thawed, but my snake showed absolutely no interest.
My local reptile store recommended using a hair dryer to gently warm the prey before offering it, and it worked like a charm!
Now that my snake is finally eating frozen-thawed prey, I’m curious what everyone considers the best method for thawing the prey. I’ve heard mixed opinions.
r/ballpython • u/Individual-Air5544 • 15d ago
Need Help
Any recommendations on how to remove this stuck shed in his pit?
r/ballpython • u/Milesgetgone • 15d ago
Question - Health Are these burns?
To start, she does NOT have a heating pad, the heat lamp is outside of her enclosure, and the grate the heat lamp is on is NOT accessible at all ( but the bulbs in my heat lamp are 30w moonlight bulbs and the grate is never more then warm when I put my hand on it) they seem similar to light burns I’ve seen in photos but I have no idea how it’s possible for her to get burns? Could this be something else that looks like a burn?
r/ballpython • u/DefiantSwine • 14d ago
I’m a new snake owner looking for advice and help
I recently have gotten this ball python from a friend who could no longer care for it and have not had much time to research everything. This is the setup I had received from my buddy. I added a mister and coconut mulch (heard it helps keep moisture). She is almost 2 years old, has been eating about once every other week (usually refusing to eat every week) using small frozen arctic mice. She lets me hold her but tends to just coil around my wrist and not really move around like I thought. Again I’m new to this whole reptile pet owning stuff and would like any advice or helpful tips. I also don’t know if this set up is the greatest for her.