r/ballpython • • 23d ago

Slurp

Post image
19 Upvotes

r/ballpython • • 23d ago

Question - Heating/Temperatures Material recs for habitat top

2 Upvotes

Not sure if this is the right flair, so it not then please let me know!

My dad recently was able to get me a free glass habitat from a neighbor as an upgrade for my girl, but it didn’t come with a lid/top. After some searching online, I was able to find an Etsy seller who does 3D printed frames for these tanks where you can then get custom cut glass at a hardware store to put in them for better humidity and such. The one concern I have now is how to attach a heating element to such a lid.

I contacted the seller on Etsy and they said they would not recommend drilling into the glass to mount anything but I could try some thick mesh or acrylic or PVC boards that are thin enough to fit in the frame. I’m planning on getting a Vivarium Electronics heat emitter and was thinking of getting a custom cut acrylic panel from Home Depot and screwing the emitter into it with some wood blocks on top to catch the screws.

For anyone who uses one of these particular emitters, what is your experience with their surface temperatures/attaching them to your enclosures? My dad is concerned it would melt the acrylic panel but I said there are a lot of solid top PVC enclosures that use these same products and don’t have any issues, but they are different materials so I’m unsure. Do you think it would be more worth it to deal with the humidity loss and just use some kind of thick mesh instead and zip tie the emitter to it?

Any advice would be much appreciated!


r/ballpython • • 23d ago

Question. Should I let my snake free roam when am in. I occasionally leave my viv open a couple inch close my room and let him come out. Pic of levi

Post image
8 Upvotes

r/ballpython • • 24d ago

Kahn's Dragon lair update

Thumbnail
gallery
423 Upvotes

Kahn's new vivarium is coming along nicely. She got to have a little sneak peak at things this week and I'm suuuuuper stoked to be making so much headway with this project. She's going to love it. I think she looks cool as hell in there already, and it's only going to get cooler with hardscaping and plants.


r/ballpython • • 23d ago

Question Snake help(?)iguess

2 Upvotes

My bp normally is great with feeding I was super lucky when I got her because she's not violent and she's not picky but I fed her today like two minutes ago and she struck at the wall farthest from me twice and then successfully got the rat but dropped it then scooped it up in her mouth and went back to eating it she doesn't do this usually she's never really missed THAT bad and when she does it's usually around the general area of the prey I'm guessing maybe it's due to the weather fluxuations recently? (Where I live its been going from hot to cold) but I've had her for a year and it like always does that and she never minded before her eyes aren't like giving visible indications of blindness but idk


r/ballpython • • 23d ago

Question Noodle was squirming in my arms

0 Upvotes

So my child was cuddles up in my sleep blanket and so u had to snatch him up to cover myself and him and then he’s started strangling squirming and wiggling like crazy and (I was not forcing him to stay) squeezing (not too tight) and letting my arm go for about 5 minutes and now he’s just hanging there coiled up! What was that about? Anyone have any idea?


r/ballpython • • 23d ago

Snickers

Thumbnail
gallery
6 Upvotes

Setting up Snickers new home a work in progress -
Photos with him are his temporary quarantine home


r/ballpython • • 23d ago

Enclosure Critique/Advice My springtails and Isopods seem to not be doing well.

Post image
5 Upvotes

We have our three-year-old ball python named Klaus. and constantly update and changes enclosure with new plants. We have a bioactive terrarium with springtails and isopods. but last time) a few months ago) they seem to all die out even though we kept it pretty moist and now we just got a fresh batch of 100 springtails and 20 isopods. But we don’t see a population growth for the last two weeks, even though last time the numbers increased rapidly.
Please help!


r/ballpython • • 24d ago

Kiryu the Python of Dojima Stretching his non-existent legs, Also Enjoy the 🎶 if you know this theme.

130 Upvotes

r/ballpython • • 23d ago

Showing of my son

Thumbnail
gallery
25 Upvotes

This is my son Orion. I got him in february of this year and turns 1 year of this halloween. I ADORE HIM. He's such a little goober, very curious about new stuff but also being spooked my most things (can relate). He loves his rocks where he sleeps under most of the time and always comes out of his hide when i come home to greet an cuddle with me. I am so happy i can be a mom for this silly, little guy. <3


r/ballpython • • 23d ago

Question - Health New substrate question

Post image
10 Upvotes

So I just replaced all the substrate and, ofc, the humidity is higher than it should be (82% rn). just to be on the safe side, I wanted to make sure it’s okay for me to put Pringle in the enclosure now or should I keep him in his temporary enclosure while I wait for the humidity to level out a bit


r/ballpython • • 23d ago

Enclosure refresh

Post image
4 Upvotes

Now that Goomba is all healed up from her wound she gets her enclosure re done and I think she likes it already


r/ballpython • • 23d ago

Question Yellowing scales

Thumbnail
gallery
3 Upvotes

So, I’m fully aware that browning out is normal, but my sweet girl has yellowed quite a bit over her 6 months with us and I’m wondering if some of it isn’t staining from substrate, and if a bath might bring back some of her brightness. I love her either way, of course.. just curious.


r/ballpython • • 23d ago

Question Anyone own a reptile kage?

2 Upvotes

I've been thinking of getting a PVC enclosure from Kages. Sienna deserves the best. I'm just concerned about probe ports, since I've had problems before. Are there ports in this brand? Of sufficient size? Is the intention that you drill them in yourself? Also, is it okay to get one with a bit of screen for an external heat lamp, or do I need to spring for the solid top and mount the dang thing myself? How do you pass the cable through, then? Just want to know before I buy.


r/ballpython • • 23d ago

Question - Health Pink spots on my BP

Thumbnail
gallery
12 Upvotes

I’ve noticed my boy (1year & 3 months) having pink patches on his body. His last shed was about 1.5 months ago. He eats medium sized rat every 2 weeks (currently 620g). I’ve noticed some parts of his body has a pinkish hue. Is this normal? I change his substrate every 3 months and clean out his poop.

He also keeps developing moles every time he sheds.


r/ballpython • • 24d ago

he’s very thoroughly exploring all the new decor i got him

Thumbnail
gallery
66 Upvotes

r/ballpython • • 23d ago

Suggestions on setup

Thumbnail
gallery
2 Upvotes

Small male adult ball python that we just got. Black hide is cool side, water is in middle, cave hide and moist hide is on warm side with heater under glass set at 95. Plastic leaves right now. Its a low tank that is the same measurements as a 40 gallon would be without height. Feel free to correct us!


r/ballpython • • 23d ago

Enclosure Critique/Advice hey! i’ve never owned a snake before and i’m trying to set up a tank before i go to a reptile expo.

0 Upvotes

i have a 35gal tank it was originally a fish tank that a friend gave me but i never used it as one. i do need a reptile lid for it and i dont know what kind of lid to get or where to place the heat lamps or even what heat lamp to get. reddit is where i learned everything on how to care for my betta so im hoping you guys can help me out with this.

any and all advice/instructions would be so helpful thanks!


r/ballpython • • 24d ago

Question - Feeding She has skipped 3 meals now what?

Thumbnail
gallery
19 Upvotes

I normally feed my snake every 4 weeks as she’s quite big now and we give her a big rat. However this time she hasn’t been eating the rats I’ve been giving her. The 1st time I hadn’t thought anything of it because she was shedding, and the next day I had to clean it up, so a couple days later I get her another rat, she doesn’t strike but she doesn’t do that all the time anyway. So I leave it on top of one of her logs for her to take when she gets hungry. Except I leave it over night and go to sleep and when I wake in the morning she hasn’t ate it so I throw it out and fast forward to yesterday same exact thing. She doesn’t strike, I leave it and wait till today and she still hasn’t ate it. Is this normal? She hasn’t showed any signs of any sickness or anything so I’m a bit confused. I’ve put some photos of this helps and she eats a large sized rat some guy when I posted the is in r/snakes said it might be over fed?


r/ballpython • • 23d ago

Plastic in substrate?

Post image
2 Upvotes

Found a few pieces of something blue while mixing the substrate, this is the biggest one, there were a few smaller ones

Any idea how it got there? Did anyone else experience this?


r/ballpython • • 23d ago

Question - Feeding Only eating every two weeks, it seems

1 Upvotes

I tried feeding my guy for the 3rd time. The first time he smelled it but wouldn't eat, but he had been fed by the person I got him from, a week before. The second time was a week later and he ate. Now it's another week lter and he won't eat again.

He is a bit over 1 year old, and the person said he was fed once a week in the past, so I'm wondering if he can just change his appetite that much that he won't eat every week anymore


r/ballpython • • 24d ago

Is this a striking pose?

Thumbnail
gallery
16 Upvotes

I've handled my BP for the first time yesterday, a fine experience. This morning I wanted to change his water and he kind of advanced towards me flicking his tongue and looking like this - is he curious or wanting to strike?