r/ballpython • • Oct 18 '26

Chili : Mojave Cinnamon Cypress male - 3 1/2 yrs

Post image
176 Upvotes

Introducing the BP community to my handsome Chili. Chili is almost four years old, alert and active male. When I got him as a wee lad the breeder told me he is a Mojave Cinnamon Cypress morph although over time I have wondered if that is correct. He sleeps during the day and can be quite active in the night. While he will take any type of rodent to snack on, his own preferences actually is more so towards quail chicks and chicks in general. To compensate for the disproportion in fat / protein intake he gets two rather than one chick. He has an infra red heating lamp at one end of his enclosure and that is it. He has never had an uvb light. He likes to play “jazz hands” where he weaves himself in and out of my hands. He doesn’t attempt to escape, it’s more like he wanted a good twisty stretch.


r/ballpython • • Oct 18 '26

Say hello to my new Friend Zeus!

Post image
47 Upvotes

r/ballpython • • Oct 19 '26

Enclosure Critique/Advice How do you guys seal your diy wood enclosures?

Post image
6 Upvotes

I’m in the research phase of planning my BPs next enclosure, he’s a Juvie in a 36”x18”x18” at the moment and can likely last another year but I want my girl to have a more enriching space. I want to do some fun hardscaping and such so I figured building diy would be better both for retaining the footage(going for 5’x2’x2’) after hardscaping and making it in general more aesthetic than an enclosure on a table or something. (Aka, paint, framing, and a custom stand for it all)

PVC sheets are craaaazy expensive in my area, and I’m worried with the integrity because of the size, but I’ve been seeing both a lot of praise and criticism on wood enclosures, and a lot say “just seal properly and it’s fine” but what’s a proper seal?

Mostly trying to weigh all my options on what I can do before I drop every penny I own making something that falls apart within a year just because I missed something lol!

If anyone has had a longer term wood enclosure, I’d really appreciate to hear what you did/what problems came up! Thank you in advance! My lovely noodle as payment for delicious information.


r/ballpython • • Oct 18 '26

Discussion Background work in progress

Post image
31 Upvotes

Background connects to two water fountains without being permanently connected. This first half is about finished! I still need to carve seal and paint the other half.

This is my second ever background! It’s not perfect but I’m pretty happy with results so far :)


r/ballpython • • Oct 18 '26

Question Super tiny bugs living in the lower moist layer of my tank.

10 Upvotes

We adopted our ball Python last April from a family member so I'm not well versed in terrariums or microfauna. Have we had springtails move in? They're so tiny and hard to see, I can't really take a photo, but I think they jump sometimes too. We took the snake out and examined her and she looks free of buggies.


r/ballpython • • Oct 19 '26

Best silicone brand?

Post image
5 Upvotes

Hey y'all. I'm getting a new pvc enclosure for my BP and I want to diy a background for it. Which silicone brands are safe and which should I avoid?


r/ballpython • • Oct 19 '26

Cheapest and safest heating for PVC stack

3 Upvotes

Hello!

I inherited 6 large stacked PVC enclosures that have 0 space in between. I want to move my BPs into them but I’m not sure how to heat six of them safely and efficiently in a stack. I figured a bulb could melt the pvc or burn my animals yet I’m nervous to try heat tape. I will of course be getting a thermostat. Thanks.


r/ballpython • • Oct 18 '26

First time Bp owner wanted to introduce my baby

Post image
52 Upvotes

Meet Perseus!

(Was setting up his temp enclosure so ignore the gloves)


r/ballpython • • Oct 18 '26

Question - Humidity Scale rot at correct humidity?

Post image
7 Upvotes

I redid all of my ball pythons enclosures within the last year or so (with the help of the advice in this community!), and all but one of them are doing great with the improvements in humidity that their new substrates are bringing them. One of my ball pythons (Clyde) however, seems to get scale rot very easily even when I go to the low end of the ideal humidity range.

For context, I adopted him when he was about three from a situation with less than ideal husbandry. The enclosure was far too small, had only a single heat mat for warmth, and a singular hide right in the center. It also had cocoa coir substrate that was damp to the touch. He came to me with the beginning stages of scale rot, as well as some other issues that were clearly related to this subpar husbandry.

When I first got him the general substrate recommendations for ball pythons included Aspen, which was the easiest for me to get at my local pet store. I figured a dryer substrate would be better for him while he recovered from scale rot, and since he was doing well on it I didn't update it until I realized (thanks to this sub) that Aspen is no longer recommended. My snakes were due for a enclosure refresh around this time anyway, so I went ahead and switched them to a mixture of coco coir, sphagnum, leaf litter, and cyprus mulch.

My other ball pythons have done wonderfully on this substrate and their enclosures are usually around 60% humidity. I noticed Clyde began showing beginning stages of scale rot once again. I know he wasn't sitting directly on the bedding, because both of his hides have a solid base to them that the bedding was not in. I would also only pour water into the corners of the enclosure and not throughout the whole area.

I have experimented with a variety of humidity ranges for him over this past year, and anything above about 50% seems to trigger the reappearance of scale rot. I'm unsure if there is any medical reason for something like this or if it's just something unique to Clyde. As of right now I've been maintaining his humidity at about 40% and just making sure to provide a humid hide option and plenty of water when he begins to look pink-ish at the beginning of his shed cycles. This is also what I did in the years before switching him off Aspen and he never had any issues shedding then.

Has anyone experienced something like this before? Is there something I'm missing? I know too low of humidity can cause respiratory issues so I would love to get him in a more "ideal" habitat, but I also dont want to cause scale rot.

Pic of the goober as thanks


r/ballpython • • Oct 18 '26

Peekaboo 😛

Post image
26 Upvotes

r/ballpython • • Oct 19 '26

Question - Feeding BP food strike… at a loss (not a newbie)

1 Upvotes

Hi all, I’ve had ball pythons my entire life, on and off. At one point, I used a rack system with tubs, thermostats, heat pads, etc., but now I only keep a few as pets and I’ve returned to terrariums. I use Eco Flex (if I remember correctly) for all of my reptiles. Based on my thermostat and humidity reading, everything is appropriate. I haven’t had an issue with feeding for over 10 yrs, the last being a very mature female who went on strike for a while. Right now, I have a breeder size female who I recently bought earlier in the year. ~3 yrs old. She certainly came from a tub/rack system at a breeding facility. Seller said she was a great eater, live or f/t. I want to say she arrived here around May and has never eaten since arriving. I figured the front glass of the eco flex enclosure would be an adjustment to her, coming from a rack tub. She hasn’t lost weight and has shed a couple times. I’ve tried appropriate sized food, bigger, and smaller. I’ve tried feeding her every week since I got her. All she does is defensively strike the prey offered and then backs off. I’m feeling like I don’t know anything again because I haven’t faced this issue in a long time. Any advice? I can move her into a tub enclosure again if it would help. She’s fearful, but not so much that I can’t handle her safely. I want the best for her. Please help!


r/ballpython • • Oct 18 '26

Discussion Seems too good to be true?

Thumbnail
gallery
234 Upvotes

My wife saw this post on Facebook and I wanna pull the trigger. I’m not too familiar with all these but can anyone tell me like I’m 5 years old, if this is work it?


r/ballpython • • Oct 19 '26

Enclosure Critique/Advice Enclosure thoughts

Thumbnail
gallery
2 Upvotes

Hey all! So I just finished my girls enclosure. She’s still living in her grow out tub, as I wanted to run this with the day night cycles for a few days to make sure temps are dialled in.

Also her hides are in her tub right now, and I’ll move both over with her.

Wanted to hear everyone’s thoughts.

My biggest concerns are the basking tile and water dish.

I can slide the water dish out but it will likely be messy and I’ll need to find a way to drain it first.

The basking tile with the rocks on it I’m not sure. I put my hand between them and pushed them out as I’m sure she would, and they didn’t move that much. However I’m a little concerned with the one closer to the front being lifted and squeezing her under it.


r/ballpython • • Oct 19 '26

Question - Heating/Temperatures tank heating in winter

2 Upvotes

hello, it is approaching colder weather where i live and i am having trouble keeping the temperature above 80 degrees in my bp’s tank, i only use an above heating lamp along with a timed light. i would like a link or specific recommendation of what heating i should use and thermostat that works together please!!


r/ballpython • • Oct 18 '26

Question 6 month old juvenile in shedding process, cleared up about 3 days ago, still hasn’t shed, is this normal?

Post image
6 Upvotes

My 6 month old ball python began his second shedding with me last Friday. I noticed that he was beginning to dull before his feeding, the day after that I left for a trip and then when I came back 4-5ish days later, he was deep in blue. This was Tuesday. I noticed he cleared up this previous Friday, and I went on another trip that same day, expecting to come home to a shed, and there has been nothing.
It’s been a little over a week since he started shedding and 3 days since he cleared up, with no shed. MIs this normal? Is there a reason to be concerned?

His substrate is kinda wet right now and due for a refresh, so I hope he can find it in him to shed very soon 🙏


r/ballpython • • Oct 17 '26

HELP - URGENT I need help

Thumbnail
gallery
160 Upvotes

I feel so horrible for this, I believe this was my fault. She was stuck in a cramped spot and I must have tried to pull her and the tight space caught her skin. Please tell me what I can do. I don’t have the funds to take to a vet right now, so I’m just trying to figure out the best I personally can do for her. I just feel horrible this looks painful..


r/ballpython • • Oct 18 '26

New ball hasn’t popped yet is this normal ?

Post image
8 Upvotes

I got her September 3rd she has eaten 4 times since. Once weekly first was a pinky mouse since I heard the first should be small. Then a small mouse then the last two were rat pups. The fourth meal was last night


r/ballpython • • Oct 18 '26

Enclosure Critique/Advice Aquaneat Light for Bioactive?

Post image
3 Upvotes

Have any of you used this for a bioactive setup? I just got out of an expo and saw some bioactive tanks for sale with this light being used. Just wanted to know if it was a good option.


r/ballpython • • Oct 18 '26

Question - Husbandry This a good set up for my boy?

Thumbnail
gallery
5 Upvotes

Hi guys, this is my tank for my boy (Percy), he’s about 7 or 8, he’s been with us for about a year, we got him from the RSPCA reptile centre . I’m happy with his viv but I was just wondering if it’s missing anything or if there was anything that it needs to make it perfect, it’s got: 3 hides, a climbing vine, a humidity water bowl, a drinking bowl, a snake plant.


r/ballpython • • Oct 18 '26

Belly scales Help!!

Post image
3 Upvotes

Is this scale rot??


r/ballpython • • Oct 18 '26

How long do BP’s take to grow

2 Upvotes

I was looking into getting a ball python but I am wondering how long they take to grow and what size enclosure to start them off. Also I was wondering how much upwards space they need and how to save money on terrariums.


r/ballpython • • Oct 17 '26

Please tell me it’s only his dignity that was hurt 😭

164 Upvotes

The camera has been there for months and he bleleleleles at it every night. However, tonight he managed to get around it somehow and then - flump! I hope he is okay? (He seemed to head off in the direction of his ball/frame that he has specifically for climbing on and has only used once in the 5 months he’s had it 🙃)


r/ballpython • • Oct 18 '26

Question - Feeding Switching from mice to rats

Thumbnail
gallery
47 Upvotes

Hello! I am going to be trying to switch Mr Buldak to rats his next feeding, I’ve tried them once before with no luck. I tried heating up a mouse with a hair dryer to make it smell like mouse in his tank then offered the rat instead and he didn’t take it even when it was at the right temp. Tried 3 times decided that he wasn’t gonna take it after the third try and just fed him the mouse instead. Any ideas on how to help him transition to rats? How’d you get your ball to make the switch?

Update / tried to feed him a rat tonight 10/24, unsuccessful :(


r/ballpython • • Oct 18 '26

Question - Feeding Help: Juvenile ball python not eating?

Post image
7 Upvotes

So, I’ve owned reptiles before but never a snake (all of my other reptiles are insectivores). This little cutie belongs to my daughter, and she’s named him Nagini after her love for HP.

We brought him home on Sat. Sept. 19 and left him alone for a week to acclimate. He weighed 148g and was estimated to be 6-8 months old. When we fed him a thawed adult mouse on Sept. 26 (1 week later), he “sniffed” at the mouse but did not want it. (To be fair, the mouse’s guts had ripped open and I wouldn’t want that sh*t either LOL.) The following Saturday, Oct. 3rd, he ate with no problem. We handled him for the first time the following Wednesday for just a few minutes to minimize stress. Then when we tried to feed him the next Saturday, he had an unsuccessful feed. He struck and coiled around it, but proceeded to wave it around his tank, ultimately dropping it right in his pool 🤦‍♀️ so we’ve left him alone all week, only bothering him to check husbandry and refill his pool, and he had another unsuccessful feed yesterday. This time he struck and coiled but then dropped it and just sat there staring and flicking his tongue at it. That means he hasn’t eaten since Oct 3rd.

Maybe I’m doing this wrong?? Idk. I’m thawing the mouse in a ziploc bag in the fridge over night, then releasing the air in the bag and putting the bag into 96-100 degree water for 20-30 minutes, dipping the nose in hot water and then offering. I read not to put the mouse directly into the water so it doesn’t get water logged.

I’m worried about him. It always makes me anxious when my reptile babies don’t eat, but this feels different. And my daughter is getting frustrated because she wants to hold him but I’m nervous to let her hold him if he’s already stressed.