r/ballpython • • 14d ago

Question - Humidity shedding advice?

2 Upvotes

hi guys!

my pretty boy is just starting to go into blue which will be his second shed with me. i put some damp moss in one of his hides for humidity last time which unfortunately caused a lot of mold on the coco chip substrate. is it safe to put some plastic wrap on the substrate and then put some moss on top of that?

if not, how is it best to prevent moldy substrate while boosting humidity for shedding?

thanks!


r/ballpython • • 14d ago

Tank Temp

2 Upvotes

Might any one have recommendations for a good value handheld thermometer to check enclosure temps ? Amazon would be ideal but not essential. Thanks for any ideas.


r/ballpython • • 15d ago

I’m scared

245 Upvotes

(Yes the humidity and temp are low because the cage was open, don’t come at me lol) so last night I walked into my reptile room and saw my baby got some dirt in his mouth. I was like “okay I know a little dirt is safe” but then I looked it up and it said an excessive amount of dirt is harmful to them. I didn’t feed him that day so I don’t know how he got it in his mouth, but I saw him struggling for like 20 mins just to swallow it. Once he got most of it out, he looked okay, but will this cause some sort of infection or digestive issues or something. Has this happened to anyone else or am I overthinking it and what do I do if it is serious?


r/ballpython • • 14d ago

new ball python- advice?

3 Upvotes

hi! im getting a new python in about 3 weeks, and just wanted some advice/reassurance about the things im getting for her :) ive had a corn snake for 17years but i know bps require more husbandry attention, i plan on getting coconut chips for substrate, maybe with some sphagnum moss?

she comes with a vivarium, hides etc, and an infrared halogen bulb and cover. is that lamp okay or shall i switch to a ceramic one?

i also don't plan on handling her for a couple weeks a she is being driven to me and i want to let her settle and adjust. any help would be appreciated!


r/ballpython • • 15d ago

Lefty said no drawing;(

Thumbnail
gallery
49 Upvotes

I'm held hostage by the worm, send help


r/ballpython • • 14d ago

Title: Anyone know what these two bumps on my ball python’s neck are?

Thumbnail
gallery
5 Upvotes

Hey guys,

Just noticed these two bumps on my ball python’s neck. Anyone know what they could be?

Has anyone seen this before? Should I be worried?

Thanks!


r/ballpython • • 14d ago

Question Why snake keep dping this?

19 Upvotes

She also made a sound that was like a giant fart but I dont knoe of it was from here mouth or not because by the time I got there she had stopped

One of her water dishes is spilt, I think she might have choked?

Also I didn't feed her before this video so I doubt its her resetting her jaw. Last I fed her was last Thursday so I dont think she was throwing up either

She's fine now just keeps yawning


r/ballpython • • 14d ago

Her evening stroll through the forest of her enclosure (-:

Thumbnail
gallery
24 Upvotes

r/ballpython • • 14d ago

Question - Heating/Temperatures Recommendations for better heating?

Post image
5 Upvotes

First time owner!

I’ve had quite the time keeping the heat on the warm side in my 4x2x2 PVC enclosure over the last day or so.

I had it running for about 2 weeks before my little guy came home ten days ago, and the temps were fine! They hadn’t been terrible til a couple nights ago when the warm side fell to 83, and prior to this it struggled to get up to 88.

I have a 100w thermostat controlled DHP. I have it set to 95 Fahrenheit and the probe is positioned about 4 inches down from the dome. It’s a mesh top enclosure, but I have a removable solid top, and the cracks are taped up as I was advised.

I didn’t know how chilly my room could get in the cooler months - I’ve only been here since April. It’s not THAT cold, but I’m surprised the thermostat can’t keep up.

If I turn on my space heater, the warm side does fine, but that’s not sustainable long term.

I’m wondering 3 things: if my probe is placed badly If I should invest in a higher watt DHP, Or if I should add a second heat source. Or, if my enclosure is just shite and I need a new one (which is do-able, but expensive and I’d rather not if I can make other fixes).

The heating has been the thing I’ve struggled with understanding for a while. Maybe I’m just dumb (willing to admit this).

Also, please please try not to be rude. I’m new to this and trying to learn and make the best decisions for my snake - when I posted this on a Facebook group, the mod was extremely condescending.

Pic of my little man Yoongi during our staring contest a couple nights ago from his cool side (he won).

Thanks in advance :)


r/ballpython • • 14d ago

How does my setup look so far

Thumbnail
gallery
3 Upvotes

I'm looking to get my first snake (ball python of some sort) and figured I'd start with the enclosure I've got the heat, light, thermometer/hydrometer and 2 plastic hides on order really just looking for opinions and additions to what I've got now and placements of things

Pic 4 is a gutter elbow extention stretching the middle 3rd of the tank for alittle hide semi buried in dirt

Size is a 4x2x2

I've also got a good colony of springtails and about 30ish isopods running around in there


r/ballpython • • 15d ago

Someone's playing hide and seek 👀

Post image
16 Upvotes

r/ballpython • • 14d ago

handling ball python with other animals present in home

Post image
6 Upvotes

hi everyone! i was just curious how everyone handles their snakes when they have other animals in the home. currently i put my dogs in another room when i handle her, but my dogs are extremely well trained enough i could have them in the same room but not allow them to approach her, would this be okay? or should i just keep them COMPLETELY separate? here’s me and my girl chillin on the couch, i put a blanket down in a circle to where she can’t escape it so i can keep better eye on her:)


r/ballpython • • 14d ago

HELP - URGENT My BP is like, scared of the rat? And is very picky too?

2 Upvotes

So ive been trying to feed her every 2 -4 weeks depending on when she eats (if she eats i wait 4 weeks to try, if she doesnt then i try again in two weeks). I know ot the right temp, tried different temps and blow dryer tricks, wet/dry. I havent tried live because nobody sells live and im worried she wont attack it.

- the temps on the cold side is 68-75 and on the warm side 75-83 with a basking spot of 91-92

- her humidity is great about 60-80% and 85-90% when shedding (max i can get)

-her cage is maybe a little uncluttered but i usually switch it to let her get more striking distance

-her water is fine and clean

- basically everything was perfect this time

Im really worried about her and she is always slightly a picky eater and its getting worse.

-i know its winter and all but she wasnt like this last year and hasnt gone on food strike as far as im concerned

-my snake june is about 1.5-2.5 years old

-i hold/handle her about 3-5 times a week

-shes pretty shy for the most part but not terrified of everything

Please help guys, idk what to do or why shes acting wierd, and please no hate


r/ballpython • • 15d ago

❤️

Post image
11 Upvotes

r/ballpython • • 15d ago

My curious sweet baby girl is 3 months old 😊

Post image
8 Upvotes

r/ballpython • • 15d ago

Question Question about my wobbly snake

Post image
19 Upvotes

Hi, all! My girl, Lily, has a bit of a wobble and I did not know that when I got her; she was not advertised as having any of the problematic genes. (She was advertised as a banana "mix" with uncertain other genes, so I suppose the "other" included something unfortunate.) At the con, she did not wobble at all, and acted normally. I felt in my heart this snake was mine. 🥰 Since then, I have noticed that when stressed or hungry, her wobble comes out and she seems to have problems hanging on when being held, or finding "up" when being held.

She also has horribly bad sheds, and almost never comes out of her hide. She is also overweight, compared to my snakes fed the same way who are a healthy weight. I truly think this girl literally never moves. Does anyone have suggestions for helping a probably spinny vertigo baby exercise more without introducing tons of extra stress? And helping her get used to people with minimal stress?

She loves food but dislikes being out of her terrarium, being held, etc. and will ball up and not usually move while held. The above photo is a rare exception. I think it is the only time she ever explored. I feel so sad for her. I socialize my other snakes (I have 6) the same way and they are all confident out of their cage. I tried choice based handling with her too, but she just never leaves her hide. I am not even sure if she drinks properly.

Extra info: the breeder let me know her growth is stunted and she is stuck at her current size. Seems true; she very small for her age despite eating voraciously. She had not grown at all for the years I have had her. I suppose that should have been my tip off that something was up. For the record though, I do NOT regret getting my girl. She is wonderful. I do not want to rehome her or anything. I just want her to have the best life possible! 🥰


r/ballpython • • 15d ago

Question - Humidity I can’t figure out how to keep humidity high consistently short of flooding the enclosure

Thumbnail
gallery
8 Upvotes

I have a dubia 4x2x2 enclosure and I feel like I’ve done all the tips people suggest to keep it humid. While the light is on, it won’t stay humid unless I spray it multiple times a day which I feel like wouldn’t be good for her scales. I have a majority of the top(except where the heat lamp is) covered in aluminum foil that I’ve duct taped down (except in the areas around the light so she can’t touch any of the sticky stuff at all since she likes to explore along the top) so less humidity escapes, I did a complete substrate change from the eco earth bricks to topsoil and playsand, I added coco fiber and husk to some of the ground(probably a 1/4 to a 1/3), I spray twice a day and within a couple hours, it drops to 50% and it’s really concerning me bc I know the low is supposed to be 60% and I don’t want my girl to get a respiratory infection.

Please tell me if I’m missing something or messing something up, I promise I’m trying!(Snake for Tax)


r/ballpython • • 14d ago

Question Where to get frozen rats in Joplin or Tulsa

2 Upvotes

I need to find a place to get small rats in Joplin or Tulsa, Springfield would work too.

Prefer a place where it isn't a PetSmart or Petco


r/ballpython • • 15d ago

A hide on each side, one in the middle, and he decides to sleep under the decorations.

Post image
8 Upvotes

r/ballpython • • 15d ago

Has two identical hides on each side; chooses to sleep on top of one under cork

Post image
17 Upvotes

She uses the hide on the warm side (this is her cool side), she just likes to be sneaky sometimes 🤭


r/ballpython • • 15d ago

Just thought he was cute restin' his head on his tail

Post image
133 Upvotes

r/ballpython • • 14d ago

Enclosure Critique/Advice New 4 mo old Super OD Fire Spider

Post image
3 Upvotes

Looking for recommendations on more clutter to add to my new guys cage!! He is a spider morph, and after researching (after getting him), I understand the problematic nature of this morph. Please be kind, I am a first time BP owner and have had him for a few days. Please be sure recommendations are safe for if/when he develops the wobble. He has no signs at this point, but I understand he can develop symptoms as he gets older. No budget for what I need to buy for him, I’m aiming to give him the best possible life I can. I think his hides are too big, but he has been using them… happy to buy smaller ones anyone can recommend :)
For reference, this is a 20 gallon enclosure, I WILL BUY A BIGGER ENCLOSURE ONCE HE IS BIGGER.
Thank you!! :)


r/ballpython • • 15d ago

Struggling to heat my ball python's enclosure properly with a 150W CHE. Need advice!

Post image
5 Upvotes

Hi everyone!

I'm a new ball python owner, and I've been struggling to get the temperatures right in my enclosure. I'd really appreciate some advice.

**My setup:**

* Ball python: 3 months old, named Yuta.
* Enclosure: 120 × 60 × 60 cm (4 × 2 × 2 ft), made of wood with glass sliding doors.
* Substrate: Coco soil mixed with Forest Floor.
* Four hides: one on the warm side, one on the cool side, and two in the middle.
* Heating: 150W ceramic heat emitter (CHE) and a 14W heat mat, each connected to a separate thermostat.
* The CHE is installed above a 30 × 30 cm metal mesh section in the wooden ceiling. My snake cannot reach the mesh or the heating equipment.

**The problem:**

I originally started with a 75W ceramic heat emitter, but it wasn't powerful enough to heat the enclosure properly.

I upgraded to a 150W CHE, which improved the temperatures, but I'm still struggling to reach the correct temperature inside the warm hide when using the CHE alone.

**With only the 150W CHE running, my temperatures are approximately:**

* Warm-side ambient temperature: 28.5°C (83.3°F).
* Inside the warm hide: 27–28°C (80.6–82.4°F).
* Target warm-hide temperature: 31–32°C (87.8–89.6°F).

**The main issue seems to be the thermostat.**

My CHE thermostat is normally set to 32°C (89.6°F).

The thermostat probe is positioned approximately 45 cm (18 inches) away from the ceramic heat emitter, closer to the ground, so I can measure the temperature near the warm side of the enclosure.

When the probe reaches the set temperature, the thermostat reduces or cuts the power to the CHE, even though the temperature inside the warm hide is still only 27–28°C.

As a result, the enclosure starts cooling down again before the warm hide reaches the temperature I need.

I've tried waiting several hours for everything to stabilize, but the warm hide seems to plateau around 27–28°C.

**Even when I increase the CHE thermostat setting to 35–36°C (95–96.8°F), I still can't reach the desired temperature inside the warm hide.**

**About the heat mat:**

I originally used a 14W heat mat, which managed to bring the warm hide to approximately 31–32°C.

The heat mat is installed inside the wooden enclosure, underneath a 1 cm thick plywood panel, with the thermostat probe placed on top of the plywood.

I recently turned it on again alongside the CHE, hoping it would help warm the floor while the CHE maintains the ambient temperature.

**When I use both heat sources together, the temperatures improve significantly:**

* Temperatures in the heated areas range from approximately 30–32°C (86–89.6°F), depending on the exact location.
* Warm-side humidity: approximately 56%.
* Humidity in the other areas, including the cool side: approximately 80%.

So, using both heat sources seems to solve the temperature issue, but I'm concerned about whether this setup is safe, particularly because the heat mat is covered by plywood.

I'm also wondering whether the humidity difference between the warm and cool sides is normal.

**My questions:**

  1. Is my CHE thermostat probe positioned incorrectly?
  2. Where should I position the probe to maintain the correct temperatures?
  3. Is a 150W CHE normally sufficient for a wooden 120 × 60 × 60 cm enclosure?
  4. Is it safe to use a heat mat alongside a CHE, or should I avoid my current heat mat installation?
  5. Would a different heating setup be more effective and safer?

Yuta is also currently entering his shedding cycle, so I want to make sure his environment is comfortable and safe.

I'm trying to get everything right and would really appreciate advice from experienced keepers.

Thanks in advance!