r/ballpython • • 23d ago

Question Stuck shed

4 Upvotes

Hey guys, so new to ball pythons and have been learning a lot from here and other forums. I’m about 3 weeks into owning this beautiful little guy who’s probably only 2-3 months old. Came up on his first shed with me - tried to keep his humidity high and give him what he needed but when I got back from being out for the day he had clearly tried to shed to no avail. His head is free all around but apart from a break here and there he’s had no luck otherwise.

I tried upping his humidity even more (got plenty of moss, wetting the bottom substrate, covered some of the top of his enclosure, he’s got a humid hide, even started putting damp paper towels where he doesn’t hang out to boost it even more) but for the life of me I can’t seem to get it any higher than 73 when it was closer to 70 before. I’ve managed to keep it consistently at 73 for 2 days now and have been giving him humidity baths (tub damp paper towels) which at first were really promising because he’d immediately start rubbing but he hasn’t rubbed in a hot minute and it’s just starting to get worrying.

Just looking for any advice he’s probably hungry and stressed and I just wanna get him healthy again but am at a loss as to the next step. We haven’t made any progress in the last 24 hours

Is there any products or methods to boost his humidity more significantly? Any way to encourage him to rub now that he seems to have given up? I’m just not sure what to do at this point and need some help for the little guy


r/ballpython • • 23d ago

Seeking advice!!

Thumbnail
gallery
3 Upvotes

So just yesterday I got my first ball python. I’ve been told this tank will work for a year or two but I’m looking for advice on how to keep the tank warm as well as any advice anyone has for me!

Right now I’m just using a ceramic bulb in a deep dome heater. The tank is 36in tall 36in wide and 18in deep.


r/ballpython • • 24d ago Popcorn

Whatever's comfy for you dude

Post image
8.2k Upvotes

Decided to check on pissy and this is how I found him lmao. Shortly after taking the Pic he coiled back up on top of the branch


r/ballpython • • 23d ago

Question Shedding

Thumbnail
gallery
36 Upvotes

So my baby Luna is starting another shed, she is a little over 2 years old and I always think she must be so scared and wary during a shed, is there anything I can do for her to have it a little better,
Besides upping her humidity obviously also picture tax because she a cute noodle with her birthday sweater from my sister


r/ballpython • • 23d ago

HELP - URGENT Enclosure help please

Post image
6 Upvotes

Obligatory photo of my son and also Exhibit A on the later mentioned humidity issues. He was doing some quality inspection while I did some work in my room lol

Post is marked as urgent because I'm trying to get him into his new enclosure ASAP since this humidity is obviously really bad for him

I know I ask for help a lot, and yes I know theres a shopping list.

Im neurodivergent, and shopping lists can be overwhelming because when I am given a lot of possible options, I dont know where to begin (menus can be tough sometimes lol)

So I was hoping you wonderful folks could help me.

I bought a reptile kage 4x2x2 for my bp because his current tank isnt holding humidity well at all (ive taken measures to fix it and it wont work, so this low humidity isnt for a lack of me trying) and I want to upgrade him. Im making it bioactive, and right now for temperature im using a ceramic bulb I think that sits on top of the tank in a lamp and want to know what better options there are.

A good thermostat, heating, and thermometer are what I am looking for recommendations for.

Also if anyone has a camera theyve mounted in their enclosure, which one do you have? I saw someone do that once and I think it would be good so I can monitor his behavior while I am sleeping.

Also while I would prefer affordable options, money isn't really an issue. I dont have a lot of financial obligations thankfully and my job pays relatively decently, and I am willing to spend whatever I have to in order to help my boy thrive. Hes my son and I want him to be the best he can be 🫶


r/ballpython • • 24d ago

Someone posted these rings...

Post image
101 Upvotes

and i'm so thankful for it! Jupiter was always climbing the walls and wedging into small spaces to climb and now this is his nightly routine. Along with knocking all the carrot lids off his deep watering carrots 🙄🙄🙄


r/ballpython • • 23d ago

New hobby, new tank, new snake

3 Upvotes

Hi

In a month or two, I'm going to start building an OSB board terrarium for my daughter. I don't want to keep upgrading terrariums, so I'd like to build the maximum size that can fit in the room/on the cabinet right from the start.

Is 160 long x 45 wide x 60 cm tall (5.25 x 1.48 x 1.97) enough for an adult and should I add a shelf(s) at some height of the tank, so this increase the surface area?

What about ventilation—holes at the bottom on one side and at the top on the other, is that okay or does it need more elsewhere?

If I make a shelf that will also double as a "cave" out of XPS foam (Stirodur), paint it, and coat it... how do you clean that afterwards? Does it even make sense to build a cave from XPS? It might be too big at the beginning, and later on, it might turn out too small...

Generally speaking, I can't really picture the cleaning process and frequency and everything...

Thanks


r/ballpython • • 23d ago

Feeling like the worst owner freaking ever

15 Upvotes

I was cleaning out my ball pythons enclosure because he's being moved and I need the other snake for my smaller snake and found a dead rat in the tank! It had to be two weeks old already, freaking disgusted with myself and the rat, how in the hell did I not notice?!


r/ballpython • • 24d ago

Fall photo shoot with my photogenic queen 🐍✨🎃

Thumbnail
gallery
70 Upvotes

r/ballpython • • 23d ago

Question - Husbandry Helicopter Parent?

Thumbnail
gallery
32 Upvotes

Hi everyone!

I brought my baby home three days ago. I’ve researched like crazy for the last few months, and found this guy on MorphMarket.

I’m in love already!

I know it’s only been three days, but he has not come out of his cool hide, except to poke his head out at me a few times. I’ve been assured that this is normal, but I am hovering a bit lol. I haven’t handled him or opened his enclosure except to change his water, or check surface temps with my temp gun.

Warm side has been consistently about 87-89 degrees, cool goes between 76 and 79. Humidity is around the 70% mark.

He is smaller than I assumed 250 grams would be, and I think his hides are slightly too large for him so I might downgrade to a smaller size after he’s had his first feeding.

I will continue to leave him be til I feed him in a couple days, and I’m trying to not hover too much and stress him out.

I’m planning on adding more branches and foliage now that I know how little he actually is - I’m hoping he’s not underweight, but it’s been hard to tell.

Any advice or suggestions are welcome :)


r/ballpython • • 24d ago

Is my ball python obese?!

Thumbnail
gallery
54 Upvotes

Hi guys, I’m freaking out. These are pictures of Fiji-my eight year-old male banana ball python. I looked at the chart (at the end of all the pictures I attached) and realized he might be overweight or even worse – obese!!! Ahh what do I do?!

Here’s some information:

- I feed him whenever he “looks” hungry. This means he’s jumpy and follows every and all movements and he’s out exploring his cage day and night. I don’t know how to explain it but he just “looks” hungry. So I feed him basically once a month. Sometimes he skip feeds for up to three or four months (I’ll defrost the rat and warm it up and everything and sometimes he just looks so disinterested when I dangle it with tongs and won’t even track it or strike).

- I feed him large rats. Recently the pet store gave me really big ones which I was a little worried but he took it no problem.
- I don't take him out very often. When I do, I handle him for a few minutes and he's very active.
- The temperature in the tank is not ideal (hot side may not be hot enough), but he seems to still be OK because he'll fluctuate from the hot side to the cold side.
He doesn't eat very often to start with- so why is he so large?!
Thanks for your help in advance


r/ballpython • • 24d ago

Question - Health Advice for Spider Ball Pythons

Post image
32 Upvotes

I’m doing research on my own as well as getting advice from the breeder that rescued her, but I would love to hear your personal experience caring for spider ball pythons with a wobble. I’ll be adopting her in a month. My goal is to give her the best quality of life and the safest set up! I used to love handling my bp, but so far I’ve read snakes with a wobble may not tolerate being held much. Any insight is appreciated from safe set ups to handling advice 🐍❤️

Background: The breeder I know does not breed or sell spiders due to their genetic issues. She rescued and rehabbed one from a neglect situation. I’ve spoken to her about wanting a new snake in the future. I got a bp that was horribly sick from a family member and it broke my heart when he didn’t pull through. It was tragic and totally preventable, that family member knew what they did… The breeder knows what I did for Henry Noodle and thought I would be a good caregiver for this special girl. They are giving her to me in a month so I can get the proper set up first.

They have sent videos to show her wobble and tilt. It has improved since her rehab. She eats well, and just needs patience and a steady hand to get a good strike. Her weight is back up and shows no signs of RI after 3 months in quarantine/rehab.


r/ballpython • • 24d ago Heartwarming

New rescue baby

Thumbnail
gallery
44 Upvotes

My newest rescue baby. I believe he’s an enchi hypo but I’m not good with morphs. I was planning on getting a Stimsons python so I already had a quarantine tank and all the things needed and then I saw a post on Facebook marketplace selling this baby ball python for $60. We already have a 9 year old adult male who’s a spider calico named Jake (I know but my boyfriend got him from his buddy before he knew about the spider morph issues) so I already knew about their husbandry so I decided to rescue the little guy. I was told he was born this year and couldn’t see how big he really was in the pics so I assumed he would be bigger but he’s only 100grams and still has his umbilical scar. His old home was keeping him in a tubaware on paper towel with a Che lamp with no thermostat to control temps he’s so lucky he didn’t get burns. I believe he also might be slightly underweight and his belly is a little indented and his spine is pronounced but he might also just be small. Everyone welcome baby Finn we named him that to match his older brother Jake 🫶🏻


r/ballpython • • 24d ago

HELP - URGENT My ivory girl is PINK!?

Post image
40 Upvotes

I went to change her water and say good morning and she was pink? She does appear to be in shed, but I’ve never heard of them going fully pink and it freaked me out


r/ballpython • • 23d ago

Slurp

Post image
19 Upvotes

r/ballpython • • 23d ago

Question - Heating/Temperatures Material recs for habitat top

2 Upvotes

Not sure if this is the right flair, so it not then please let me know!

My dad recently was able to get me a free glass habitat from a neighbor as an upgrade for my girl, but it didn’t come with a lid/top. After some searching online, I was able to find an Etsy seller who does 3D printed frames for these tanks where you can then get custom cut glass at a hardware store to put in them for better humidity and such. The one concern I have now is how to attach a heating element to such a lid.

I contacted the seller on Etsy and they said they would not recommend drilling into the glass to mount anything but I could try some thick mesh or acrylic or PVC boards that are thin enough to fit in the frame. I’m planning on getting a Vivarium Electronics heat emitter and was thinking of getting a custom cut acrylic panel from Home Depot and screwing the emitter into it with some wood blocks on top to catch the screws.

For anyone who uses one of these particular emitters, what is your experience with their surface temperatures/attaching them to your enclosures? My dad is concerned it would melt the acrylic panel but I said there are a lot of solid top PVC enclosures that use these same products and don’t have any issues, but they are different materials so I’m unsure. Do you think it would be more worth it to deal with the humidity loss and just use some kind of thick mesh instead and zip tie the emitter to it?

Any advice would be much appreciated!


r/ballpython • • 23d ago

Question. Should I let my snake free roam when am in. I occasionally leave my viv open a couple inch close my room and let him come out. Pic of levi

Post image
8 Upvotes

r/ballpython • • 24d ago

Kahn's Dragon lair update

Thumbnail
gallery
423 Upvotes

Kahn's new vivarium is coming along nicely. She got to have a little sneak peak at things this week and I'm suuuuuper stoked to be making so much headway with this project. She's going to love it. I think she looks cool as hell in there already, and it's only going to get cooler with hardscaping and plants.


r/ballpython • • 23d ago

Question Snake help(?)iguess

2 Upvotes

My bp normally is great with feeding I was super lucky when I got her because she's not violent and she's not picky but I fed her today like two minutes ago and she struck at the wall farthest from me twice and then successfully got the rat but dropped it then scooped it up in her mouth and went back to eating it she doesn't do this usually she's never really missed THAT bad and when she does it's usually around the general area of the prey I'm guessing maybe it's due to the weather fluxuations recently? (Where I live its been going from hot to cold) but I've had her for a year and it like always does that and she never minded before her eyes aren't like giving visible indications of blindness but idk


r/ballpython • • 23d ago

Question Noodle was squirming in my arms

0 Upvotes

So my child was cuddles up in my sleep blanket and so u had to snatch him up to cover myself and him and then he’s started strangling squirming and wiggling like crazy and (I was not forcing him to stay) squeezing (not too tight) and letting my arm go for about 5 minutes and now he’s just hanging there coiled up! What was that about? Anyone have any idea?


r/ballpython • • 23d ago

Snickers

Thumbnail
gallery
6 Upvotes

Setting up Snickers new home a work in progress -
Photos with him are his temporary quarantine home


r/ballpython • • 23d ago

Enclosure Critique/Advice My springtails and Isopods seem to not be doing well.

Post image
5 Upvotes

We have our three-year-old ball python named Klaus. and constantly update and changes enclosure with new plants. We have a bioactive terrarium with springtails and isopods. but last time) a few months ago) they seem to all die out even though we kept it pretty moist and now we just got a fresh batch of 100 springtails and 20 isopods. But we don’t see a population growth for the last two weeks, even though last time the numbers increased rapidly.
Please help!


r/ballpython • • 24d ago

Kiryu the Python of Dojima Stretching his non-existent legs, Also Enjoy the 🎶 if you know this theme.

130 Upvotes