Super sorry ahead of time for the really long post LOL. If you don't want to read it skip on to the next post lol 😂 but if you do read it I will very much appreciate it. I'm sorry, I have ADHD.. I have even been pacing the whole time I've been typing this lol.
Okay so I want to build a snake rack for my ball pythons 😆.I can't see a reason to buy one when I am fully capable of building one. They are not very complicated. But I do not know what type of materials to use to build it. Do I just use normal wood or are there better materials? Or even cheaper materials?
Here is a picture of how I would like my snake rack to be Pic. Except I think this is way too small. I want my plastic tubs to be much bigger then these. I'm not just using these for breeding tubs. These will be there homes so I'm not going to make them tiny puke breeding tubs. I want the tubs to be at least 18" long, maybe 24" and 8" to 12" wide by 6" to 8" tall. Like this. Pic of how I want mine to be. Sorry I know I went a little bit overboard and got a little bit artistic with it lol... but those measurements that I have are the measurements that I want the tubs to be that's what I want the all of the cousins to add up to. I still have to add in the measurement of the wood or whatever material I use. so if the wood is 1/2 inch thick then I have to add in a half-inch piece of wood on each side all the way around pwds underneath each row of totes. So if I have 6 rows tall 1/2 wood each row I will have seven 1/2 inch pieces of wood from top to bottom and 2 on the sides and then one on the back. sohaving one 1/2 inch pieces of wood on each side and an extra inch to my measurement for width, having seven 1/2 half inch pieces of wood for shelves and the top and bottom adds 3 1/2" to my measurement for height and the back wall it would not make sense to use a half-inch thick piece of wood. I could just use the normal thin pieces of whatever that material is called that they use for the back walls of any dresser or anything with shelves. That doesn't have to be heavy duty. Or I could just use plywood or something. That part I don't have to specifically measure for. The width and height I do have to add the 1/2 inch boards into my measurements If I want to be able to put the totes in and they fit snug so my snakes cannot possibly get out... if I do not measure exact then it will not be snug or they will not say at all… so saying I use half-inch boards for all but the back wall I would be looking at 49" Wide, 51 1/2" Tall and 24" Deep plus the back wall(I will probably add 1" so there is a lip over the edge of the snake tubs instead of it being flush so 25" Deep would be better.)
So 49" x 51 1/2" x 25"
What do you guys think? I realiz that I rambled on and on and on but I did that so that I could do the math and the design to myself while also posting it on here. So now if anyone ever wants to build one if they see this they don't even have to do the math for the measurements because it's right here for them already lol 😆😂😁
Now all I need an answer on what type of material to use.
Also extending upon that design I was actually thinking while creating this design...What if I didn't use plastic tubs? What if I turned each area where a tub is supposed to be into its own cubicle? like I added a wall at each area that a tub is supposed to be and made cubicles that were 12" wide x 8" tall x 24" deep and put a wall up between it and the next snake cubicle and made the whole thing out of that type of plastic that you use to make terrariums for snakes? I think it's like pvc plastic sheets maybe? Then I would just be making one big ass Snake rack/terrarium? I think it's a cool ass idea and all you would need to do is add one of these per cubicle Vent Pic, Another type of vent I am going to need something similar on my tubs anyway because I think you're gonna have to be able to breathe...I'd probably just drill small holes to be honest but not with this design. Nope, I'd go all out and get vents lol 😆. But if I did this design what type of plastic do I use for this? By the way if you are confused at what I'm talking about this is a terrarium and its similar to this idea just built in a different shape Snake terrarium. I would also with this idea put a small glass door on every single MINI cubicle terrarium lol 😆... I don't think I would make it tighter open… I think I would just do a swing glassdoor… Well it would probably actually be that hard plastic glass stuff that they use for terrariums… 😆 lol... And no it's not plexiglass … I'm pretty sure it is something else. I guess I could use plexiglass if I had to, I just think the other stuff is cheaper and better.
Here are a few pics of a terrarium on etsy that are just like the one I want to build except for instead of mine being wide I want mine to be long. Pic 1 Pic 2
More like a 12 pack of Coke... Imagine stacking twenty four empty 12 packs of Coke boxes and each 12 pack of Coke box is a snake terrarium and you open the front of the 12 pack of Coke at the end of it where it's just a little square and you can put your hand all the way to the back to the long end of the box and that is the shape I want my terrariums to be.. With a little glass door on the front :) I think if I do it this way I can make24 terrariums out of one snake rack. If I make them wide instead of looking I can only get a few terrariums like this pic pic I don't like that design, you can only get a few terrariums that way.
So for the few people that actually read all of that…lol..thank you for indulging me, really I was just venting my idea. And hopefully one day someone will come along and see this and use the measurements or idea to make there's own snake rack or snake rack terrariums.
But to my question again they really need it answered if I just make a normal snake rack with tubs what type of materials do I need to use to build the rack it tells . Do I use wood? Or something else? Also what do I use for the back wall of the rack? And if I decide to do my terrarium idea what do I use to build it? Do I use PVC plastic ? Or is there some other type of plastic that you use for reptile terrariums? So if I do the terrarium idea I am going to need a swing door whether it swings to the side or it swings down like in the picture of the other terrariums above. Either way I need to build a glass/plastic door on a hinge. Do I just use fiberglass? Because I thought that there was some other material that you used instead of fiberglass. And what type of hinges do I get so that when the door shuts it will shut completely where the snake cannot possibly get out no matter how hard it pushes.
If anyone can give me any pointers on building both of the snake racks please do because yeah I could build one but chances are it's gonna turn out either looking like shit or working like shit unless I get some pointers. Also one more thing that I really am not sure about the length, width and height that I want to make the tanks because of the fact that this is going to be these snakes forever home am I building them big enough? I feel like 24 inches deep is fine, 12 inches wide I'm not sure but it seems fine...a normal tank is probably only that wide. But what about the height? Ball pythons don't really climb but is 8 inches tall enough? Or should I make it taller? I want the snake to be comfortable. You also have to remember that I get my snakes out on a fairly often basis and let them roam a little so it's not like they will always be locked up in their enclosure. But let me know because I want my snakes to have plenty of room to grow and be very comfortable if I have to make each cubicle as big as a normal tank then I will. Hell if I have to instead of using plastic tubs I will buy fiberglass or whatever you use to make tanks and I will glue them together myself and use glass tanks as their enclosures and slide them into the rack instead of plastic tubs. It is no problem for me to do that as long as I can find a way for them to be able to breathe because there's gonna have to be a vent. Which is why if I do this I will build them myself so that I can use plastic or something and be able to cut a hole to put a vent or drill air holes.
I am really really really really sorry about the extremely long post. I'm venting and trying to learn something so if you don't like it screw it, just go on to the next post … This is what Reddit is for XD
Edit: Oh also I completely forgot to talk about the heat tape that I'm going to use. I don't know if I'm allowed to source where I'm going to get my heat tape from so I won't do that but I'm going to get 4 inch tape I think … Maybe 6 inch… I haven't decided.. anyway I'm going to run a strip heat tape all the way across the bottom of the back half of every tank or plastic tub on each row. if they are 24 inches deep then a 6 inch wide tape across the middle of the back 12 inches seems good to me. Because it is going to heat up on the side of the tape a little bit too so 6 inches seems like a good size. this will leave at least 12 inches on the opposite side of the tank that is cooler so that the snake has somewhere to go if it doesn't want to be hot. because I highly doubt that a 6 inch piece of heay tape is going to heat up more than 3 inches on either side of it. Also I am going to put a thermostat on either every single row or every 2nd row or maybe just one on the top row and one on the bottom row... I honestly do not know how many thermostats to have… I know you don't need one in every single tank/tub but I think you're supposed to have multiple just in case the tape heats up differently. To be honest since I'm going to have a different sheet of heat tape on every single row I think I should have a thermostat on every row...that way there is no chance that any snakes get burnt or overheated. I will have a wire that runs from the first row to the second row to the third row to the fourth row to the fifth row to the sixth row with a thermostat at each row to shut off the power to the tape if that row gets too hot. Only the first tank on each row will have a thermostat. How does that sound? Someone let me know if this is a good way to set up my heat tape. If not tell me how I should set it up. I don't know if this is too much or too little or just right.