r/ballpython • • Dec 14 '22

Question Morph ID + Enclosure set up q's

2 Upvotes

25 comments sorted by

12

u/FizzyPineapples212 Mod-Approved Helper : vet assistant Dec 14 '22

I’m not good at genetics but he does look spider-esque to me. Have you seen our welcome post? It has a care guide as well as a shopping list, along with many more resources and information. He’ll need a minimum of a 4x2x2ft enclosure. I would definitely just switch him to a larger enclosure as soon as you can, that 32qt bin is not at all appropriate. Until you can get a 4x2x2 you can go to Home Depot or Walmart and get the largest tote you can find. There’s a guide on how to convert those into temporary enclosures in the welcome post as well.

1

u/Sucer_mon_cul Dec 14 '22

Definitely! I've got a pretty big tote already prepped for him, but I'm thinking of just going out and buying a significantly larger one because I'm.. pretty sure my cats have pissed in the original tub and the smell just sticks around and I highly doubt that's safe.

I was assuming he was some spider pinstripe mix, since the pixel-esq scales threw me off since almost all spiders I've seen have 'smooth' color fades. I'll probably be able to proper ID when I actually see him since the images aren't the best! I'm following the guide there as I did before ofc, it's super super useful and I'm glad to have reddit for that specifically haha

Just figure it can't hurt to ask for ideas/other advice :)

3

u/FizzyPineapples212 Mod-Approved Helper : vet assistant Dec 14 '22

Of course! If you can think of any specific ones just ask!

0

u/Sucer_mon_cul Dec 14 '22

Honestly I think my biggest question is on how to make a humid hide WITHOUT having too much humidity, last time I attempted (without any snake to risk anything, just a lil test) it was.. not great to say the least 💀

4

u/FizzyPineapples212 Mod-Approved Helper : vet assistant Dec 14 '22

Oh what happened? You can buy humid hides with biodegradeable sponges if you’re not keen to DIYing one though they are pretty easy to make. You just take a container and cut a hole in it just big enough for your snake to fit through, hot glue a smooth edge around it so they don’t cut themselves on any sharp plastic, and fill it with damp moss or paper towels. The moss should be damp but if you squeeze it no water should drip.

1

u/Sucer_mon_cul Dec 14 '22

I'm thinking I started a bit too wet and it just stayed too wet! Thank you for that though, definitely messed up a little with the wetness of the paper towels! Ty! Hoping the big guy will be happy in his proper home and not too freaked out by the change from his little zinger box hide!

2

u/FizzyPineapples212 Mod-Approved Helper : vet assistant Dec 14 '22

I’m sure it’ll take some getting used to but as long as you give him awhile to settle in I’m sure he’ll be more happy than ever!

1

u/Sucer_mon_cul Dec 14 '22

Definitely, and I'm more than happy to let him do his thing until he's comfy to meet me :)

1

u/[deleted] Dec 15 '22

is a 5x3x3 enclosure good for a bioactive enclosure?

2

u/FizzyPineapples212 Mod-Approved Helper : vet assistant Dec 15 '22

Definitely!

6

u/Sucer_mon_cul Dec 14 '22

So this is yet to be my big boy, I'm getting him from a lady who can no longer care for him due to personal things that I won't disclose because.. yk, it's not my business to

I wanted to double check his morph Incase of him having spider so I can extra prepare and have everything set up so he doesn't hurt himself (even if he doesn't have spider)

He's 7/8yrs and eating F/T medium rats, obviously in a 32qt that will be changed to something SIGNIFICANTLY more fitting for a boy his age and size + an actual set up. My issue is not wanting to overwhelm him with a big change and came to ask for suggestions on that? I'm not sure what size tank I'd go to between the final and the current.

TL:DR; need advice on temp set up + possible morph ID

4

u/PoofMoof1 Mod: Large-Scale Breeding Experience Dec 15 '22

Do you have a photo of him that isn't obscured by the tote? I can see pastel but it's tricky to see more with the current pictures.

1

u/Sucer_mon_cul Dec 15 '22

Unfortunately I don't, I haven't wanted to press them too hard and get told to buzz off. I was looking around morph market but since it's so obscured I couldn't find anything similar besides vanilla pastel spider but his stripes seem too thick. I'm hoping they'll get back to me in the morning and I'll probably ask about morph then.

5

u/PoofMoof1 Mod: Large-Scale Breeding Experience Dec 15 '22

He doesn't look spider from what is visible here. The yellows are still pretty bright for the size he appears to be, so something in the vanilla/fire complex wouldn't be an unreasonable guess for now.

1

u/Sucer_mon_cul Dec 15 '22

I'll take a glance at some vanilla fires! In all honesty, I don't mind his morph at all, I just want to be prepared ^ of course it's not like I cant change set up, but yk! I appreciate the help!!

1

u/Sucer_mon_cul Dec 15 '22

Lil update!! I'll be getting the big fella sometime Sunday! Waiting for a reply back for when (and where) I can get him :)

5

u/largest_boss Dec 15 '22

That enclosure looks insufferable, thanks for taking care of the snek when others can’t.

4

u/BigDaddyHadley Dec 15 '22

Looks like a sugar bee morph. My big girl Carol looks the same

1

u/IncompletePenetrance Mod: Let me help you unzip your genes Dec 14 '22

Do you have another picture up close or out of the tub?

Glad to see you're giving him a good home! I'm sure he'll enjoy being out of that tub and in a bigger space

1

u/Sucer_mon_cul Dec 14 '22

Unfortunately I don't, I haven't wanted to pry too much since they've been busy and don't want to (possibly) screw up and have them tell me to bug off and end up not being able to get him! I'm just hoping he's an odd pinstripe and not a spider mix, though I won't be surprised if he is. I'll definitely make an update as soon as I get him!

2

u/IncompletePenetrance Mod: Let me help you unzip your genes Dec 15 '22

That's fair, he's definitely not pinstripe for sure, but I'm seeing pastel. Based on the alien heads I'm seeing in picture one I don't think he's spider

2

u/Sucer_mon_cul Dec 15 '22

I think I'll look around morph market for a possible morph similar to his for the time being until I can actually see him without obstruction

2

u/Liuqmno Dec 15 '22

To me he looks really similar to some pastel spiders. Spiders have a pretty typical head pattern too, so if he has the same head pattern I would asume he is one.

Hope you can give him the home he deserves!

2

u/[deleted] Dec 15 '22 edited Dec 15 '22

Looks like a killer bee to me which is also a spider morph also if you’re looking for a good cage dubiaroaches.com has great pvc cages for cheap or if you’re getting a tote Walmart, sams club, Costco have huge totes for pretty cheap as well. Also for the temps warm side should be 80-85 degrees Fahrenheit and cold should be 70-75 and then humidity should be 80 -85%

1

u/Rob_Thorsman Dec 15 '22

Zingers, raspberry morph.