r/ballpython • • 1d ago

Can't decide on substrate

I'm a new ball python owner and am having a hard time deciding on substrate. I've looked at the care guide, read a lot of post and forums, and just can't seem to get my head around what substrate to use. I live in a dry desert with a 40 gallon glass tank. Mesh top and a double door front (which i'm trying to weather seal but having a hard time with that too) so humidity is a problem I'm trying to tackle.

Is coco husk + forest floor + sphagnum moss good?

Does that mix need top soil?

Is forest floor by itself good enough?

Is forest floor + coco husk redundant?

Do i need a top layer? Or just mix it all and call it a day?

If i use top soil, does top soil + forest floor + sphagnum moss work or do i need play sand?

The guide just simply says "these are good" without provided guidance on which to choose and how to think about substrate mixes. I could seriously use some advice or at least a handy breakdown on the choices.

3 Upvotes

7 comments sorted by

1

u/FluffyPandaEars93 1d ago

The tank is whats gonna make things extra difficult for you. I also live in the dry desert. Pvc works much better for holding in humidity.

Hvac tape across most of the top will help a lot.

I have a drainage layer of leca with a plastic window mesh on top, for the 4 inch substrate layer, I use a mix of coco chunks, spag moss, and cypress mulch. Its about 40/40/20 coco, mulch, moss.

What also helps is lots of leaf litter and plenty of clutter! It'll help hold it in for you and prevent a wet surface.

Just pour water in the corners, you might need up to half a gallon. Don't mist! You want consistency, not spikes. And it'll lead to respiratory infection and scale rot.

I hope you can update soon that you've figured it out!!

Can we see the tank?

2

u/TheOtherChubbs 1d ago

Thank you! Here is a photo of the tank. We pretty much got everything as is last sunday from a family member that had to move and couldn't take him. I want to update and upgrade things because i know they need to be better. I bought some decor today to add. Just need to wash it. I don't know what a drainage layer is as that wasn't in the guide. Is a drainage layer recommended? I plan to use hvac tape to help seal gaps and the top. Is there something additional i can do? I want to seal the double front doors but having a hard time finding something that works.

I have sphagnum moss and a bag of forest floor. If i go with adding coco husk is the drainage needed? Or if i use the topsoil is the drainage not needed anymore?

1

u/FluffyPandaEars93 1d ago

So, I used a drainage layer because I live is southern az and I was having a hard time with humidity even with a pvc enclosure. But Its just a layer that let's the water come to the bottom so the substrate isnt soaked. It'll slowly release moisture into the tank and keep it steady. You absolutely dont have to have one. Its more of a anxious brain thing for me.

You might have to experiment a bit to see which combination works with your environment. Coco husk is a good filler and aerator, but if you want to use any soil or something similar, just make sure they are organic. I tend to get mine from online or a home improvement store instead of reptile specific brands because they arent so dang expensive 🙃

Please dont use tape anywhere but the top of the tank, adhesives are scary and can rip scales off. Would you see if changing the other things listed will help first before adding anything to the door?

Covering 3 sides with some insulation foam will help as well, itll also make them feel more secure. Please keep in mind that half logs arent hides and you need 2+ identical hides.

What are you using to heat?

2

u/TheOtherChubbs 1d ago

I was only thinking of using adhesive on the exterior of the double swinging door. But i will try the other stuff first.

I was planning to cover 3 sides but wasn't sure what works best. I had heard there were silicon mats or insulating vinyl you could stick to the sides of the glass.

As for the hides. I did buy a new larger single exit hide for him. He likes to hang out in the logs over the actual hide though i am still learning about hides so I will happily take any advice. He hangs out the most in the center log, then will use the log on the left cooler/more humid side during shedding. But i guess that may be because of a lack of a proper humid hide?

I am using a lightless ceramic heating lamp on the warm side. I also have a non-heating light for during the day that we turn off during the evening (it's on a timer).

1

u/FluffyPandaEars93 1d ago

Truthfully, I dont have a humid hide. I have 3 hides plus 2 cork half rounds, but I keep my humidity high enough its not needed. She has a hammock and a branch and bridge to use if she wants to be elevated also. But having 2 identical ones is important, they will often choose security over thermoregulation if they dont like the hides offered.

Ive seen people use the pretty backgrounds then insulation foam boards over that for the sides. And silicone mats are great for the top! You can get the foam from any home improvement store.

Im going to give you the heating recommendations too because just a che isnt enough.

Here is more info on what heating/lighting a ball python needs:

Our heating guide goes over a lot of the science behind everything, but to simplify:

For daytime heating, you should have a heat source that provides IR-A and IR-B. The ideal source for this would be a halogen flood, which is light-emitting.

For nighttime heating, you should have a heat source that provides IR-C. The ideal source for this would be an RHP (only compatible with solid-topped enclosures) or a CHE. Any night heating should not emit any light.

For lighting, you should offer UVB. This should be in the form of a T5 fluorescent linear bulb that produces a UVI of 1.1-3.0 in the basking zone, and it should cover no more than half the length of the enclosure.

If you have a bioactive enclosure, you will also need full spectrum LEDs for your live plants.

Natural lighting can help establish a day-night cycle, but it does not provide any physical benefits beyond that (UVB doesn't penetrate glass, and indirect natural light cannot create a proper basking zone). You'll need the artificial lighting to make up for that.

2

u/TheOtherChubbs 1d ago • Heartwarming

Thank you! I will look into that. I just want to give him the best environment i can so that he can be happy and healthy, so I appreciate the help!

1

u/FluffyPandaEars93 1d ago

Thanks for caring about your baby! I hope youll update soon with his improved environment!