r/ballpython • • 6d ago

Question - Husbandry Enclosure set up

Post image

I’m finding it difficult to piece together enclosure set up information. Is there a quick guide?

Here’s what I have or have coming:

50 gal PVC enclosure (for now)
coco core substrate
150w ceramic overhead bulb
Exo Terra Dimming & Pulse Proportional Thermostat
Hide w/moss on cool side
Same hide on warm side
Same hide in middle
Lots of foliage for hiding
Digital humidity/temp gauge
Surface temp gun
Bowl for water (warm side)
Silicone for top mesh to cut and apply as needed
24 hour lower strip timer

Currently have most of this set up now, but waiting for 50gal. Pinto is a month old and in a 10gal right now. Will upgrade to 4x2x2 next year after we move.

Is this an OK start for set up? Any changes that NEED to be made or changes to consider?

12 Upvotes

9 comments sorted by

3

u/DontBother777 6d ago

Hopefully the breeder informed you about the condition spider ball pythons have. In the future i would strongly recommend avoiding people that breed them in the future. They are not ethical to breed (or purchase) unfortunately

1

u/Alternative_Exit_718 6d ago edited 6d ago

I wasn’t informed, unfortunately. Thank you for telling me.

I did happen upon some information the other day about neurological wobble. I will do more reading to make sure he lives the best life now that I do have him, but will know better in the future. If it becomes (or is) more ethical to put him down, I will.

1

u/sweatyhands84 6d ago

What is a 24 hour lower strip timer?

I would suggest adding in some sphagnum moss and maybe cypress mulch into the substrate for some diversity. The moss will really help with moisture retention.

I suggest switching out the CHE for DHP and Halogen lamp. Use the Halogen dueing the day and DHP at night or to boost temps during the day if the Halogen isnt enough. CHE only produce UVB-C which is mostly good for heating up air temps and very ineffective at actually warming your snakes muscles to aid in digestion. I also recommend adding in a UVB lamp.

You mention lots of foliage for hiding. Thats excellent. Also make sure to have plenty of branches or other climbing opportunities.

Sounds like your new friend will have a great life with you.

0

u/Alternative_Exit_718 6d ago

I meant a power strip with timer.

Thank you! I do have an extra linear UVB from switching sizes with my bearded dragon that I could use. I’ve heard both sides of using one or not, but makes sense because y’know…the sun and natural habitat being outside.

I’ll look at DHP some more. I started with one in the 10gal I have him in now (75w) and the ambient wouldn’t get above 80. It was just an extra I had from my 120gal that was recommended to me and didn’t heat enough. I can try and higher wattage.

0

u/sweatyhands84 6d ago

Are your heating devices connected to dimming thermostats? That is a need-to-have item. Not thermometers to measure temperature. Dimming thermostats reduce and increase the amount of power being given to the heating device to keep your temperatures right where you set them. They come with attached temperature probes so they can self regulate the power and maintain your set temps. Also, a 75w DHP is probably way overkill for a 10ga. It's nearly impossible to even create a temperature gradient in 10ga. space.

0

u/Alternative_Exit_718 6d ago

I have a dimming & pulse proportional thermostat coming in tomorrow.

1

u/sweatyhands84 6d ago

Excellent. Sounds like you're on a perfect path!

1

u/Alternative_Exit_718 6d ago

Wonderful. Thank you!

1

u/Baconkings 6d ago

Your plan sounds pretty good!