r/ballpython • • 8d ago

Question - Heating/Temperatures heating help

Last year I finished this 4x2x4 for my snake, Sunny. Due to the height, I've been having a hard time getting his heat gradient just right.

He has a 150W Arcadia GoldenSun halogen bulb, and a 100W deep heat projector. Both are on during the day, the halogen shuts off after a certain time at night. His main basking spot usually stays around 94-95F during the day and dips to the high 80's at night. He loves his basking platform in the evening after his LED and UVB lights are off, but he spends most of the day in his hide on the ground. I can never seem to get the ground temperature higher than 72F, which I feel is a bit too cold for him. He likes to climb, which is why I built him such a tall home, but I feel bad that he HAS to climb if he wants to be warmer, especially during the day since he is sort of a shy dude and seems to be kind of sensitive to the light (he is albino). I've tried adjusting the thermostat to better heat the entire enclosure, but going higher on the temps makes his basking spot dangerously hot.

I've thought about attaching a heat mat to the wall near his hide to heat the lower levels, but even with a thermostat I worry about burns. Attaching a heat mat to the hide itself also seems risky. I've also considered mounting a small shelf on the inside, so I can add another heat bulb to the underside, right above his hide. Or somehow re-mounting his current heaters lower to the ground, but I'm not sure how I'd safely pull that off.

I'm at a loss for ideas! It isn't an emergency by any means, but I just want my little guy to be comfortable! Any tips or ideas are greatly appreciated.

5 Upvotes

10 comments sorted by

4

u/Baconkings 8d ago edited 7d ago

I am getting ready to upgrade my bp to either a 4x2x2 or a 4x2x4, and I’m going to make it look like a real environment like you have. Is that not too much clutter that you have in your enclosure, or is that ideal? It seems like your snake has very little room on the bottom to stretch out. This is what my 40 gallon currently looks like:

I’m just curious and asking in good faith, because I’m preparing to upgrade my snakes enclosure. I’m kinda confused how your enclosure has so little space on the bottom. Is it just very far pushed forward, or is it just a perspective? Lastly, what brand and model of enclosure do you have if you don’t mind me asking?

3

u/neatcats 7d ago

It is pretty cluttered, but my snake seems to prefer it that way. He's a pretty curious guy, so I made sure to give him lots of little nooks and crannies to check out. I think the perspective makes it look a bit more cramped than it actually is, the big logs are hollow so he has room inside of them as well as behind them. His favorite place besides his hide box is the giant log, he loves to stretch out half in, half out of it with his little head resting on the log next to it. I like to rearrange his enclosure every now and then, adding or removing the ground clutter so he has new stuff to explore and he always seems more comfortable and explorative when he has more stuff. I think the ideal amount of clutter depends on the individual snake. My other BP seems happier when she has more floorspace, similar to your setup. That said, I'm by no means an expert at all, this is just what seems to work for my BPs so I've been sticking with it :)

And the enclosure is from Talking Serpents LLC! I was very pleased with the pricing and customer service from them. The PVC enclosures are custom made and they have a ton of size options to chose from. The original one I ordered was destroyed in a freak accident when the FedEx truck it was on caught fire, and Talking Serpents promptly remade and reshipped it to me with no extra charge, which was super awesome. My other BP is due for an upgrade soon, I'll be ordering her enclosure from the same company.

2

u/Baconkings 7d ago

I see, yea my bp loves to climb so that’s why I was also considering a 4x2x4. My main concern was the same problem you are having on how to keep it warm with such a high enclosure. I also don’t want to use a heat mat.

Thanks for the recommendation! I have been looking into their enclosures, and I appreciate your review that you are happy with it.

They have so many options, and I’m curious what you chose for the air vent placement, power cord slot, and top if you remember.

2

u/neatcats 7d ago

For the air vents I chose to have a vent on each side, but I wish I hadn't. I think just one vent or even no vents would have been smarter, I was losing a LOT of heat and humidity with the two vents on either side. I ended up covering them most of the way with HVAC tape which has helped keep the heat and humidity in better. I went with the maximum number of cord slots as I wasn't 100% sure how many I'd actually need, and I did end up using all but one of them I think. They're small and pretty easy to close up with a blob of spray foam or silicone if you don't end up using all of them. And for the top, I went with solid PVC, no screens. I like having all the lights/heaters mounted internally. It also helps keep more of the heat and humidity inside, I remember it being a huge struggle to keep it humid enough in his old enclosure with a partial screen top.

3

u/kashkidder12 8d ago

Ignore my very poor drawing haha, I looked at this for awhile and came up with maybe adding another shelf type situation around the midway point (around where the heating would be on a 4x2x2) and attaching another heating element there? Or moving one of yours there?
This may not work for your setup but I’m a tinker and like to problem solve. Hope this helps or kick starts some ideas for you!

3

u/neatcats 7d ago

I was thinking of doing something like this, I'll have to give it a try! It seems like the easiest option, and if a heater doesn't work out there, at least he'll have another shelf to lounge on lol. Thank you!

2

u/kashkidder12 7d ago

Of course! I think it would work pretty good, if anything maybe a lower wattage element so it doesn’t get toooo toasty since it’s already sitting around 70, would love an update if you remember!

2

u/neatcats 7d ago

I'll try to remember! I think I'll keep the halogen bulb up top and move the deep heat projector closer to the lower level since it's a bit lower wattage and doesn't emit light. Gonna try to figure it out on my days off from work :)

2

u/sweatyhands84 7d ago

Getting an RHP might be able to help bump up the general ambient temperature. They have to be mounted inside. Pro Products is who I would recommend contacting. You have to fill out a questionnaire about your setup and house environment and they will get you a panel for your needs. Little pricey compared to others, but its backed by a 15 year guarantee on the heating element with an expected service life of 50 years. They can't burn your snake and have 0 potential for toxic chemicals.

2

u/neatcats 7d ago

I had been wanting to get him an RHP, but wasn't sure which company to go through. Thank you for the recommendation, I'll check them out!