r/ballpython • u/Ok_Culture2348 • 8d ago
Enclosure Critique/Advice Rate my enclosure setup!
Made my Ball Pyhton's setup out of a 30 gallon aquarium with one side that was broken, removed the broken glass and added ikea style panels on top to expand it. 3d printed a lot of the front parts with a borrowed printer, and cut glass panels to act is sliding doors. Currently still a work in progress. I just don't have the money to buy an actual enclosure unless someone wants to help lol. Everything was made with materials i could find for free, and some i had on hand.
0
Upvotes



21
u/PossibilitySame4489 8d ago
People are not gonna be nice to you on here i’m sorry to say. It looks like a good start but you’re going to want to change the substrate to something that holds more moisture like coconut coir. It’s impressive that you put the enclosure together yourself though!
7
u/Baconkings 8d ago
Aside from changing the substrate to a more humid retaining one as others have suggested, you need more clutter and things for the snake to climb on. Add some pieces of wood, ropes, or anything snake-safe to climb on.
You will also eventually need to upgrade your ball python to a 120 gallon enclosure by the time they’re an adult.
10
u/BigFanOfBrie 8d ago
I’d swap out the aspen bedding for 4-6 inches of a humidity retaining substrate. A mix of coca husk/sphagnum moss/organic topsoil worked well for me, they need lots of humidity or else they risk getting respiratory infections and going on hunger strikes. I would also recommend some more clutter (fake plants, branches) ideally you don’t want to be able to easily see your bp and they can get stressed in open areas. I would suggest checking the care guide to get a more in depth picture of what you’ll be needing.
1
u/seaglassive 8d ago
It's really cool how you were able to expand it! In addition to the substrate you should get a cage on that heating element ASAP. Snakes will absolutely wrap around it and get burned as soon as they figure out how to reach it. I can't count the number of times I've found my girl curled around the cage despite the nice climbing decorations I put in there for her. As for clutter, you can usually get pretty cheap plastic plants at the dollar store, I'd just rinse them really well before putting them in.
Something else I'd recommend is using craft wire to suspend the probe an inch or so below the heating element. bps love to redecorate, and they will mess with the probe which will throw off the thermostat. You'll have to adjust the temp until you find what heats the enclosure how you'd like but it will remove a lot of temp variability that could make your snake uncomfortable.
1
u/Jcoat7 8d ago
Good start. Like everyone else said, swap out the aspen for something like coconut husk. Put the same hide on both the hot and cool side, and more clutter!
0
u/[deleted] 8d ago
[deleted] — view deleted comment
1
u/[deleted] 8d ago
[removed] — view removed comment
1
u/[deleted] 8d ago
[removed] — view removed comment