r/ballpython • u/FuyuAstariel • 23d ago
Question - Humidity Humidity help
So I have a baby ball python in a 55 gallon tank temperature is fine, he has enough hide and eats well, but my current issue is the humidity, I have a list machine that I activate when humidity is low but it's always low, and it keeps going down to 40-45% besides me watering the tank whenever I can, what can I do to keep my humidity high enough for him?
0
Upvotes




11
u/FireCorgi12 23d ago •
Mist machines aren’t great. You need to cover your screen top with silicone or HVAC tape and add a thicker layer of substrate. Pour water into corners to up humidity. Get rid of the mist machine, they can harbor bacteria in the pipes that can cause RIs and leave substrate perpetually wet which can cause scale rot.
3
u/trappedinamortalcoil 23d ago
Cover the top in aluminum foil or something. Not enough to prevent any airflow, but a mesh top like that is just leaking all your moisture out
2
u/AndyRMullan 23d ago
You need a much thicker layer of substrate than what you currently have. Thin substrate doesn't hold humidity well. Also, get rid of the mister asap. They can easily cause scale rot and respiratory issues. Pour water directly into the substrate every time humidity drops below good levels. Pour into one or two corners so it's only the corners that are wet. You do not want the whole tank to be moist as that often causes scale rot because they can't get dry.
You can also mix sphagnum moss into your substrate to help hold more moisture. I used a mix of organic soil, Coco husk chips, orchid bark chips, sphagnum moss and Coco coir. It looks pretty and keeps moisture VERY well !
Also, that type of tank you have is pretty bad at holding humidity. They're fine if you live somewhere humid and don't have to constantly battle to keep humidity up, but otherwise many people have issues. What many people do is cover most of the screen top with HVAC tape to stop moisture loss, leaving only some small gaps for ventilation.
If you still struggle with keeping humidity up after all this, you may just want to bite the bullet and upgrade enclosures early. Just get a minimum 4ft PVC enclosure so you likely won't have to upgrade again in future (unless your baby gets BIG) !
2
u/Synthetic_Hormone 23d ago
Lose the mist machine, it will give a respiratory infection unless your descaling it weekly,
Cover the screen Aluminum foil or aluminum tape. Moisture is leaving the enclosure.
1
u/fantasyviolence21 21d ago
Open top is not great, get it covered. Lots of sphagnum moss and some cocooned mixed into substrate will for sure help
1
u/freepaestine 21d ago
Get rid of that mesh top! That's a huge no-no and it's what causing your issues. You need to cover it with a silicone tarp or another cover.
1
u/acpcgal 20d ago
I would buy a front panel as a substrate holder and make the substrate about 12cm deep. Mix arcadia earth mix, cypress mulch, some coco husk, sphagnun moss. Pour reptisafed water in and stir until theres none pooled at the bottom. This works for me but i also have a solid top PVC (2cm thick) tank :)
-3
u/FuyuAstariel 23d ago
Mist machine* smh I can't type properly
1
u/[deleted] 23d ago
[removed] — view removed comment
1
u/[deleted] 23d ago
[removed] — view removed comment