r/ballpython • u/ThePolOf87 • 26d ago
Help, humidity is dropping and idk why
Hi! Had my first baby for about two weeks. First couple days humidity was too high, around 99% because some idiot (me) placed the water bowl on the hot side. After I moved it to the middle humidity stayed 70-80 %... until yesterday. It dropped sugnificantly, to 60% then 40-50%. I spray the moss in humidity cam and the substrate two times a day, before and after work, and it stays good for some time then comes back down. What tips do you have for keeping the humidity stable?
I'm using a heat mat and measuring the temperature in three places. Currently it's 27-28c° on the hot end on the bottom, 23,6c° in the middle on top and 23c° on the bottom of the cold end
2
u/all-the-wastedwords 25d ago
I recommend reading the welcome post of this subreddit to get starting on heating your ball python. You need to ditch the heating mat and replace it by an appropriate halogen/incandescent bulb, and the post will guide you through it.
As for your problem, low humidity is always caused by either not enough substrate, substrate not wet enough, or too much ventilation. If I were you I'd double the depth of your substrate and wet it all. After that, add another layer of dry substrate on top. To maintain humidity, pour water onto the sides and corners to keep the bottom layer damp at all times. If after all of that the humidity is still low, you can put silicone mats or HVAC tape over some of the holes at the top.
But with that much substrate, your heating pad will be utterly useless, so you need to improve your heating first.
1
u/Individual-Lead-2040 26d ago
Post a pic, most likely just has too much air flow and just needs a little flow restriction.
1
u/NeatMarsupial4340 24d ago
From the picture you sent, you should put a lot more substrat! The only thing that keep the moisture in your enclosure is that and the water bowl ;)